Moen 21689 Specification

Type
Specification

Moen 21689 is a double bowl sink with a pulldown faucet and soap dispenser, designed for both top-mount and under-mount installations. Its stainless steel construction ensures durability, while the sound-deadening undercoating minimizes noise and condensation. The faucet meets various safety and efficiency standards, including NSF 61/9 & 372, and is backed by a lifetime limited warranty against leaks, drips, and finish defects.

Moen 21689 is a double bowl sink with a pulldown faucet and soap dispenser, designed for both top-mount and under-mount installations. Its stainless steel construction ensures durability, while the sound-deadening undercoating minimizes noise and condensation. The faucet meets various safety and efficiency standards, including NSF 61/9 & 372, and is backed by a lifetime limited warranty against leaks, drips, and finish defects.

Specifications
SINK COMBO DESCRIPTION
Manufactured from 18 gauge, stainless steel
Overall sink dimension 33" x 22"
Bowl Left: 14" x 18" x 9"
Bowl Right: 14" x 16" x 9"
Pulldown faucet with soap dispenser in Spot Resist™ Stainless nish
3-1/2" diameter recessed drain opening in each bowl
Included sink drain assemblies (Qty 2)
Soundshield™ undercoating maximizes sound deadening and inhibits condensation
QuickMount™ mounting hardware for top-mount installation
Under-mount installation clips not included
CUT OUT DIMENSIONS
Cut out dimensions are 32-3/8" x 21-3/8", with a 3/8" corner radius (top mount)
Cut out prole is shown on included template (under mount)
QuickMount hardware can be installed on a deck thickness of 5/8" to 1 5/8"
A tolerance of ±1/16" is acceptable
STANDARDS
Third party certied by IAPMO to meet ASME A112.19.3/CSA B45.4 and all applicable
specications referenced therein
FAUCET STANDARDS
Third party certied to ASME A112.18.1/CSA B125.1, and all applicable requirements
referenced therein including NSF 61/9 & 372
Meets CalGreen and Georgia SB8370 requirements
Complies with California Proposition 65 and with the Federal Safe Drinking Water Act
The backow protection system in the device consists of two independently
operating check valves, a primary and a secondary which prevents backow
• ADA
for lever handle
WARRANTY
Lifetime limited warranty against leaks, drips and finish defects
to the original homeowner
10 year limited warranty when used in a multifamily installation
5 year limited warranty when used in a commercial installation
Visit www.moen.com/support for complete details and limitations
LAINIE™
Oset Double Bowl Sink w/Faucet
Models: 21689
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS
(DO NOT SCALE)
7/20
INSTALLATION DETAIL
MOUNTING STUD
COUNTERTOP
SINK “VCHANNEL
COUNTERTOP CUT-OUT
SINK OVERALL DIMENSION
SEALANT
MOUNTING NUT
MOUNTING CLIP
9"
(226mm)
16-1/4"
(413mm)
3-1/4"
(83mm)
3"
(76mm)
15-5/8"
(396mm)
O 1.5"
O.D. DRAIN
(2 PLACES)
9-21/32"
(245mm)
7-11/16"
(195mm)
9-3/4"
(248mm)
1"
(25mm)
2"
(51mm)
22"
(559mm)
3-5/16"
(83mm)
33"
(838mm)
R
  • Page 1 1

Moen 21689 Specification

Type
Specification

Moen 21689 is a double bowl sink with a pulldown faucet and soap dispenser, designed for both top-mount and under-mount installations. Its stainless steel construction ensures durability, while the sound-deadening undercoating minimizes noise and condensation. The faucet meets various safety and efficiency standards, including NSF 61/9 & 372, and is backed by a lifetime limited warranty against leaks, drips, and finish defects.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI