Specifications
SINK COMBO DESCRIPTION
• Manufactured from 18 gauge, stainless steel
• Overall sink dimension 33" x 22"
• Bowl Left: 14" x 18" x 9"
• Bowl Right: 14" x 16" x 9"
• Pulldown faucet with soap dispenser in Spot Resist™ Stainless nish
• 3-1/2" diameter recessed drain opening in each bowl
• Included sink drain assemblies (Qty 2)
• Soundshield™ undercoating maximizes sound deadening and inhibits condensation
• QuickMount™ mounting hardware for top-mount installation
• Under-mount installation clips not included
CUT OUT DIMENSIONS
• Cut out dimensions are 32-3/8" x 21-3/8", with a 3/8" corner radius (top mount)
• Cut out prole is shown on included template (under mount)
• A tolerance of ±1/16" is acceptable
STANDARDS
• Third party certied by IAPMO to meet ASME A112.19.3/CSA B45.4 and all applicable
specications referenced therein
FAUCET STANDARDS
• Third party certied to ASME A112.18.1/CSA B125.1, and all applicable requirements
referenced therein including NSF 61/9 & 372
• Meets CalGreen and Georgia SB8370 requirements
• Complies with California Proposition 65 and with the Federal Safe Drinking Water Act
• The backow protection system in the device consists of two independently
operating check valves, a primary and a secondary which prevents backow
• ADA for lever handle
WARRANTY
• Lifetime limited warranty against material or manufacturing defects to the original
consumer purchaser
• 5 year warranty if used in commercial installations
Kelsa™
Oset Double Bowl Sink w/Faucet
Models: 21538
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS
(DO NOT SCALE)
11/15
INSTALLATION DETAIL
MOUNTING STUD
COUNTERTOP
SINK “V” CHANNEL
COUNTERTOP CUT-OUT
SINK OVERALL DIMENSION
SEALANT
MOUNTING NUT
MOUNTING CLIP
9"
(226mm)
2"
(51mm)
16-1/16"
(408mm)
4-7/16"
(112mm)
4-1/4"
(108mm)
3"
(76mm)
15-5/8"
(396mm)
O 1.5"
O.D. DRAIN
(2 PLACES)
8-3/4"
(222mm)
7-7/8"
(199mm)
9-3/4"
(248mm)
1"
(25mm)
11-1/8"
(282mm)
2"
(51mm)
22"
(559mm)
3-5/16"
(83mm)
33"
(838mm)
R
-
1
