2. Moen
  3. 21689
21689

Moen 21689 Specification

  • Hello! I am an AI chatbot trained to assist you with the Moen 21689 Specification. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What is the overall sink dimension?
    What are the dimensions of the left bowl?
    What are the dimensions of the right bowl?
    What type of faucet is included?
    What is the diameter of the drain opening?
    What type of undercoating is applied?
    What type of mounting hardware is included?
    What is the cut out dimension for top mount installation?
    What is the cut out dimension for under mount installation?
    What is the acceptable tolerance for the cut out dimension?
Specifications
SINK COMBO DESCRIPTION
• Manufactured from 18 gauge, stainless steel
• Overall sink dimension 33" x 22"
• Bowl Left: 14" x 18" x 9"
• Bowl Right: 14" x 16" x 9"
• Pulldown faucet with soap dispenser in Spot Resist™ Stainless nish
• 3-1/2" diameter recessed drain opening in each bowl
• Included sink drain assemblies (Qty 2)
• Soundshield™ undercoating maximizes sound deadening and inhibits condensation
• QuickMount™ mounting hardware for top-mount installation
• Under-mount installation clips not included
CUT OUT DIMENSIONS
• Cut out dimensions are 32-3/8" x 21-3/8", with a 3/8" corner radius (top mount)
• Cut out prole is shown on included template (under mount)
• QuickMount hardware can be installed on a deck thickness of 5/8" to 1 5/8"
• A tolerance of ±1/16" is acceptable
STANDARDS
• Third party certied by IAPMO to meet ASME A112.19.3/CSA B45.4 and all applicable
specications referenced therein
FAUCET STANDARDS
• Third party certied to ASME A112.18.1/CSA B125.1, and all applicable requirements
referenced therein including NSF 61/9 & 372
• Meets CalGreen and Georgia SB8370 requirements
• Complies with California Proposition 65 and with the Federal Safe Drinking Water Act
• The backow protection system in the device consists of two independently
operating check valves, a primary and a secondary which prevents backow
• ADA
for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects
to the original homeowner
• 10 year limited warranty when used in a multifamily installation
• 5 year limited warranty when used in a commercial installation
Visit www.moen.com/support for complete details and limitations
LAINIE™
Oset Double Bowl Sink w/Faucet
Models: 21689
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS
(DO NOT SCALE)
7/20
INSTALLATION DETAIL
MOUNTING STUD
COUNTERTOP
SINK “V” CHANNEL
COUNTERTOP CUT-OUT
SINK OVERALL DIMENSION
SEALANT
MOUNTING NUT
MOUNTING CLIP
9"
(226mm)
16-1/4"
(413mm)
3-1/4"
(83mm)
3"
(76mm)
15-5/8"
(396mm)
O 1.5"
O.D. DRAIN
(2 PLACES)
9-21/32"
(245mm)
7-11/16"
(195mm)
9-3/4"
(248mm)
1"
(25mm)
2"
(51mm)
22"
(559mm)
3-5/16"
(83mm)
33"
(838mm)
R
/