Kohler K-96058-L-0 Dimensions Guide

Category
Sanitary ware
Type
Dimensions Guide

Kohler K-96058-L-0 is an elongated flushometer bowl with bedpan lugs. It is made of vitreous china and is ADA compliant. The bowl has a 1-1/2" rear spud and a 10" x 7" water surface size. It is designed to outperform competitors in bowl cleanliness and plug resistance, and has maximum waste removal and an excellent bowl rinse. It is engineered to flush effectively in buildings with low supply pressure and flow, and has maximum drain line carry at all flush volumes per ASME Standard. The bowl is 26-1/8" L x 14-5/8" W x 16-5/8" H and has an 11" rough-in.

Kohler K-96058-L-0 is an elongated flushometer bowl with bedpan lugs. It is made of vitreous china and is ADA compliant. The bowl has a 1-1/2" rear spud and a 10" x 7" water surface size. It is designed to outperform competitors in bowl cleanliness and plug resistance, and has maximum waste removal and an excellent bowl rinse. It is engineered to flush effectively in buildings with low supply pressure and flow, and has maximum drain line carry at all flush volumes per ASME Standard. The bowl is 26-1/8" L x 14-5/8" W x 16-5/8" H and has an 11" rough-in.

Features
Elongated bowl, ADA compliant.
1-1/2" rear spud.
10" x 7" water surface size.
Bedpan lugs. Also available with antimicrobial finish
K-96058-SSL.
Glazed 2-1/8" trapway.
Material
Vitreous china.
Technology
Designed to outperform competitors in bowl cleanliness and
plug resistance.
Maximum waste removal.
CSA B651
OBC
Engineered for toilet seat cover removal.
Excellent bowl rinse.
Engineered to flush effectively in buildings with low supply
pressure and flow*.
Codes/Standards
Maximum drain line carry at all flush volumes per ASME
Standard.
ASME A112.19.2/CSA B45.1
DOE - Energy Policy Act 1992
Installation
EPA WaterSense
®
California Energy Commission (CEC)
26-1/8" L x 14-5/8" W x 16-5/8" H
ADA
11" rough-in.
ICC/ANSI A117.1
Replaces Highcrest K-4301-L and Highcliff K-4367-L. Height
and footprint may vary.
CSA B651
OBC
Water Conservation & Rebates
1.28 to 1.6 gpf flush range (1.28 and 1.6 gpf).
KOHLER
®
One-Year Limited Warranty
WaterSense compliant when used with a 1.28 gpf WaterSense
flushometer.
See website for detailed warranty information.
Components
Additional included component/s: Spud, and Bolt Cap Accessory
Pack.
Available Color/Finishes
Color tiles intended for reference only.
DescriptionCodeColor
White0
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
10-9-2018 08:42
Highcliff
Ultra
Elongated Flushometer Bowl - Bedpan Lugs
K-96058-L
26-1/8" (664 mm)
Notes
Technical Information
Install this product according to the installation
instructions.
All product dimensions are nominal.
Flushometer, Floor-mountToilet type:
For back-to-back toilet installations: Use only a
45° double wye fitting.
FloorWaste Outlet:
Elongated frontBowl shape:
Requires flushometer valve to match desired
water consumption 1.28 gpf (4.8 lpf) or 1.6 gpf
(6 lpf).
Flushometer valve siphonFlush type:
1-1/2", Inlet, TopSpud size:
2-1/8" (54 mm)Trap passageway:
ADA, OBC, CSA B651 compliant when installed
to the specific requirements of these regulations.
Water Consumption
1.28 gpf (4.8 lpf) or 1.6 gpf (6 lpf)Full:
Plumbing codes may require elongated toilets
and elongated, open-front seats in public
bathrooms.
10" x 7" (254 mm x 178 mm)Water surface size:
6" (152 mm)Rim to water surface:
Accessibility standards may require controls to
be located on the open side of the toilet.
11Rough-in:
5-1/2" (140 mm)Seat-mounting holes:
Fixture Supply Requirements
35 psi (241.3 kPa)Min static pressure:
80 psi (551.6 kPa)Max static pressure:
25 psi (172.4 kPa)Min flowing pressure:
25 gpm (94.6 lpm)Min flow rate:
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
10-9-2018 08:42
Highcliff
Ultra
Elongated Flushometer Bowl - Bedpan Lugs
K-96058-L
  • Page 1 1
  • Page 2 2

Kohler K-96058-L-0 Dimensions Guide

Category
Sanitary ware
Type
Dimensions Guide

Kohler K-96058-L-0 is an elongated flushometer bowl with bedpan lugs. It is made of vitreous china and is ADA compliant. The bowl has a 1-1/2" rear spud and a 10" x 7" water surface size. It is designed to outperform competitors in bowl cleanliness and plug resistance, and has maximum waste removal and an excellent bowl rinse. It is engineered to flush effectively in buildings with low supply pressure and flow, and has maximum drain line carry at all flush volumes per ASME Standard. The bowl is 26-1/8" L x 14-5/8" W x 16-5/8" H and has an 11" rough-in.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI