Notes
Technical Information
Install this product according to the installation
instructions.
All product dimensions are nominal.
Flushometer, Floor-mountToilet type:
For back-to-back toilet installations: Use only a
45° double wye fitting.
FloorWaste Outlet:
Elongated frontBowl shape:
Requires flushometer valve to match desired
water consumption 1.28 gpf (4.8 lpf) or 1.6 gpf
(6 lpf).
Flushometer valve siphonFlush type:
1-1/2", Inlet, TopSpud size:
2-1/8" (54 mm)Trap passageway:
ADA, OBC, CSA B651 compliant when installed
to the specific requirements of these regulations.
Water Consumption
1.28 gpf (4.8 lpf) or 1.6 gpf (6 lpf)Full:
Plumbing codes may require elongated toilets
and elongated, open-front seats in public
bathrooms.
10" x 7" (254 mm x 178 mm)Water surface size:
6" (152 mm)Rim to water surface:
Accessibility standards may require controls to
be located on the open side of the toilet.
11Rough-in:
5-1/2" (140 mm)Seat-mounting holes:
Fixture Supply Requirements
35 psi (241.3 kPa)Min static pressure:
80 psi (551.6 kPa)Max static pressure:
25 psi (172.4 kPa)Min flowing pressure:
25 gpm (94.6 lpm)Min flow rate:
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
10-9-2018 08:42
Highcliff
™
Ultra
Flushometer Bowl, Lugs, Antimicrobial
K-96058-SSL