Actidata 42000024 Datasheet

Actidata
Brand
Actidata
Model
42000024
Category
Tape auto loaders & libraries
Type
Datasheet

This manual is also suitable for

Actidata 42000024 is a versatile and powerful tape library that offers high data density, easy installation, and flexible configuration options. With its compact 2U design, it can fit into a standard 19-inch rack or be placed on a tabletop. It supports both LTO-3 and LTO-4 tape drives with SCSI, SAS, and Fibre Channel interfaces, providing compatibility with a wide range of backup applications. The library features two magazines that can hold up to 12 tapes each, allowing for a maximum capacity of 16.8 TB of data with a 2:1 compression ratio.

Actidata 42000024 is a versatile and powerful tape library that offers high data density, easy installation, and flexible configuration options. With its compact 2U design, it can fit into a standard 19-inch rack or be placed on a tabletop. It supports both LTO-3 and LTO-4 tape drives with SCSI, SAS, and Fibre Channel interfaces, providing compatibility with a wide range of backup applications. The library features two magazines that can hold up to 12 tapes each, allowing for a maximum capacity of 16.8 TB of data with a 2:1 compression ratio.

actiLib Library 2U LTO:
The actiLib Library 2U is ideal as an entry-level solution for those application environments that demand automated
storage while at the same time being kind to your budget. It is easy to install, user friendly and enables unattended
backup to be configured. Its sleek 2U design not only fits 19 inch rack systems but also lends itself to table top use.
Leading backup applications support the actiLib Library 2U that accepts its commands via the intelligent Drive SCSI
interface using LUN masking thus saving valuable connections.
Product Highlights:
• High Data Density in a small foot print
The highly efficient cartridge layout allows for a 2U design and
so minimises 19 inch Rack space consumption. Maximum
capacity assuming a 2:1 compression ratio is 16,8 TBytes of
data.
• Easy to install into existing IT Infrastructures
Integrated Web-Based Remote Management enables the
administrator to configure and maintain the library from the
workplace and does away with the need for hands-on setup.
• Standard Bar Code Reader
The time to initialise the machine is greatly reduced through the
use of the standard Bar Code Reader. It simplifies the addition
of cartridges into the backup scheme and facilitates
keeping track of data
• Magazines and Mailslot
All tapes are kept inside of two Magazines that are easily
injected and ejected and allow for bulk loading. In addition, a
Mail Slot safeguards non-disruptive operation of and positively
affects the completion time of backup jobs.
• Flexible and compliant with future tape technology
actiLib AutoLoader supports both LTO-3 HH (SCSI) and LTO- 4
HH with SCSI, SAS and Fibre channel interface and is prepared
for LTO-5
• Easy to maintain and service
The Power Supply, Controller Unit, Tape Drive and Robot
can all be exchanged on-site offering decisive advantages in
resuming the backup.
We care about data
actiLib Library 2U LTO
In areas that previously dictated the use of mid-range libraries, the
actiLib Library low profile, high cartridge count and flexibility of use
make it ideal for those environments. Its commanding design, small
footprint, flexibility and service-friendliness make it the logical choice
for continued data protection and enhances the network’s overall
reliability.
GmbH Alter Hellweg 111 44379 Dortmund Email: [email protected] Web: www.actidata.com
© actidata GmbH 2009, actidata is a registered trademark of actidata GmbH.
LTO-4 Half Height LTO-4 Full Height
General
Capacity (native/compressed) 19.2 TB / 38.4 TB 19.2 TB / 38.4 TB
Max Performance 1728 GB/hr 864 GB/hr
Interface SAS, SCSI, Fibre Channel (FC) SCSI, Fibre Channel
No. of Drives 2 1
No. of Slots Available 24
Form Factor 2U (19" Rackmount)
Reliability
Robotics MTBF 500,000 swaps
Access and Operation
Remote Management (Web) Yes
WORM (Write Once Read Many) Yes
Hardware Encryption Yes
Environments
Temperature (Operating) 10°C - 35°C (50F - 95F)
Temperature (Non-operating) -30°C - 60°C (-40F - 140F)
Relative Humidity (Operating) 20 - 80% (non-condensing)
Relative Humidity (Non-operating) 20 - 80% (non-condensing)
Accessories
Included Rack mount Kit
Dimensions
Width 48.2 cm
Depth 74 cm
Height 8.76 cm
Weight (no tapes) 12 kg
For more information, please contact your Authorized Distributor or Reseller.
We care about data
  • Page 1 1
  • Page 2 2

Actidata 42000024 Datasheet

Actidata
Brand
Actidata
Model
42000024
Category
Tape auto loaders & libraries
Type
Datasheet
This manual is also suitable for

Actidata 42000024 is a versatile and powerful tape library that offers high data density, easy installation, and flexible configuration options. With its compact 2U design, it can fit into a standard 19-inch rack or be placed on a tabletop. It supports both LTO-3 and LTO-4 tape drives with SCSI, SAS, and Fibre Channel interfaces, providing compatibility with a wide range of backup applications. The library features two magazines that can hold up to 12 tapes each, allowing for a maximum capacity of 16.8 TB of data with a 2:1 compression ratio.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents