BMPRO RVView2 Installation guide

  • Hello! I've reviewed the RVView2 Install Guide. This document provides instructions for mounting and wiring the RVView2 battery monitor, which works with BMPRO's BatteryPlus35. It also outlines how to program the battery for lithium using an OdysseyLink104. I'm ready to answer your questions about this device and its installation.
  • What is the RVView2?
    How does the RVView2 connect to the BatteryPlus35?
    What kind of information does the RVView2 display?
    Can the RVView2 change the battery configuration to lithium?
RVView2 Install Guide
TEAM
BMPRO
.COM
2. Mounting
1. Description of parts
3. Wiring
The RVView2 is a wall-mounted battery monitor designed specifically to operate with BMPRO’s BatteryPlus35. The RVView2
connects to the BatteryPlus35 via the data cable. The monitor gives you vital up-to-the-minute data about your caravan’s
current status using a clear back-lit display. The display shows volts and amps, battery charge and discharge status, as well
as the source input for the vehicle’s 12V system.
To mount the RVView2:
1. Drill holes in the wall for the connectors.
2. Use flat head screws with a maximum diameter of
5.0mm to mount the RVView2 to the wall.
3. Fix the RVView2 to the wall.
4. Make all connections at the rear of the RVView2.
1. Warning Indicator
2. Power Source Indicator
3. Battery Status Indicator
4. System Voltage
5. Backlight / Screen Change Button
6. Output Current
7. Input Current
8. Tanks
MANUAL DATASHEET PRODUCT PAGE
6. heading
OPTIONAL ADD-ONS
4. Lithium Programming Using an
OdysseyLink104
The RVView2 cannot change the battery configuration of a
BatteryPlus35 to lithium. You must use an OdysseyLink104
and the Odyssey app:
1. In the top right corner in the Home Screen, press the
Settings button.
2. Scroll down to Battery Profile.
3. Select LiFePO4.
DOC PART 038649
REV 1.0
/