2. urban ambiance
  3. UQL3797

urban ambiance UQL3797 Installation guide

  • Hello! I've reviewed the installation instructions for the Urban Ambiance UQL3797 Light Fixture. This document provides step-by-step guidance on how to install the fixture, including adjusting the height, wiring, and bulb requirements. The fixture uses four candelabra bulbs type B, has a height that is adjustable from 23.25" to 69.75" and has a maximum wattage of 60W. I'm available to answer your questions based on this document.
  • What type of bulbs does this fixture require?
    Are the bulbs included with the fixture?
    What is the maximum wattage for the bulbs?
    What should I do before starting the installation?
1 of 4
Light SourceTools Required
4 BULBS REQUIRED
BULBS NOT INCLUDED
Warnings and Cautions
Turn off the electricity at the circuit breaker
before installation. Consult a licensed
electrician if in doubt about installation.
Turn off power to the fixture and allow the
bulbs to cool before replacing.
Crossbar Assembly
x 1
A
Package Contents
PARTS BAG
Fixture Body
x 1
Crossbar
Assembly Fixture Chain Ceiling Canopy
Table of
Contents
STEP 2 STEP 3 STEP 6
Fixture Height Adjustable
23.25” to 69.75”
FCeiling Canopy
x 1
Quick Link
x 4
D
Preparation: Identify and inspect all parts
before beginning the installation.
Missing or damaged parts? Contact your
original place of purchase.
Wiring
STEP 5
Fixture Loop
x 2
G
Bulb
STEP 7
Lanyard
STEP 4
Outlet Box Screw
x 2
B
Wire Connector
x 3
C
BULB BASE TYPE
Candelabra (E12)
BULB SHAPE
TYPE B
60W
MAX
Fixture Chain
x 2
E
H
Fixture Loop
STEP 1
STEP 1
Installation Instructions: UQL3797
www.urbanambiance.com
2 of 4
STEP 2 1 2 3
Step 1
Install crossbar assembly
Step 2 - 3
Test fitting ceiling canopy to nipple
STEP 3
2
Install Fixture Chain to Fixture Body
1
Adjust fixture chain length
3
Suggested Chain Length:
8’ ceiling: 12” Chain
9’ ceiling: 24” Chain
10’ ceiling: 36” Chain
N
L
N
L
Install Fixture Chain to Ceiling Canopy
www.urbanambiance.com
N
L
3 of 4
STEP 4 1
2
Step 1
Feed the fixture wires through
chains and the ceiling canopy
N
L
Step 2
Install Lanyard
STEP 5
*Green Ground Screw
on crossbar optional
White wire (neutral)
from outlet box
Ground wire
from Fixture
Black or Red wire (hot)
from outlet box
Bare or Green ground wire
from outlet box
Supply wire from fixture
Ribbed side or identified
with the Label “N”
supply wire from fixture
Smooth side or identified
with the label “L”
www.urbanambiance.com
4 of 4
STEP 6
STEP 7
www.urbanambiance.com
/