Laser LSH-CAMDBWC lets you see who's at the door remotely via the Laser SmartHome app on your phone, talk to them with 2-way audio, and record footage of visitors or any suspicious activity with the built-in camera. The camera features Full HD video and night vision, so you can see clearly who's there, even in low-light conditions.
Laser LSH-CAMDBWC lets you see who's at the door remotely via the Laser SmartHome app on your phone, talk to them with 2-way audio, and record footage of visitors or any suspicious activity with the built-in camera. The camera features Full HD video and night vision, so you can see clearly who's there, even in low-light conditions.
User Manual
Smart Full HD Video Doorbell
LSH-CAMDBWC & LSH-CAMDBBC
1GET THE APP
QR Codes for
Downloading Apps
2REGISTER OR
LOGIN TO APP
3RECOMMENDED APP SETTINGS
Tap Here
REGISTER
no account
LOGIN
existing account
6SETTING
THE CHIME
5CHARGING DOORBELL
4DOORBELL FIRST TIME SETUP
Click
Before first use,
charge the Chime for 2 hours.
Adjust
Volume / Mute.
Change Chime Tone
(38 to choose from)
Chime Battery Life approx.
2 weeks if rung 5 times a day
Chime range 200m
from Doorbell
TIP
7PAIRING CHIME TO DOORBELL
8CONNECTING DOORBELL TO APP
WAIT FOR THE TONE
PRESS AND HOLD
FOR 5 SECONDS
RING THE BELL The Doorbell and Chime
will now be paired.
PRESS 3 SECONDS
Repeat Steps 6 & 7
if changing chime
TIP
LIGHT
1
2
3
WAIT FOR THE BLEEP
SCAN THE QR CODE THAT
APPEARS ON-SCREEN
CHANGE PAIRING MODE
TO "QR CODE”
9DOORBELL SETTINGS
10 REMOVING
DOORBELL
11 ANSWERING DOORBELL
RING THE BELL
METHOD
ONE:
APP OPEN
METHOD
TWO:
APP CLOSED
12 MOTION DETECTION
MOTION DETECTION
SETTINGS
MOVEMENT
DETECTED PHOTO
MOVEMENT DETECTED
VIDEO
SELECT
TIME&DATE
13 DOORBELL FEATURES
TAKE SCREENSHOT
2 WAY AUDIO TAKE VIDEO
Q. Why is the Doorbell not pairing?
A. If your Doorbell has trouble pairing, check your Wi-Fi username and
password are correct. Ensure that you are using 2.4Ghz Wi-Fi
connections only as the 5Ghz bands are not supported.
Q. Why is my phone not ringing when
pressing the doorbell?
A.The phone will only ring if you already have the APP open.
If the APP is closed you will simply get a push notification.
Make sure you have turned on all notification settings in the
Laser SmartHome APP.
Q. How do I record motion detection alerts?
A. A Micro SD card is required for any Motion Detection recordings.
Insert a Micro SD card into the Doorbell (the slot is located in the battery
compartment). In Doorbell Settings make sure the ‘PIR’ setting has been
set to Low/Medium/High.
TROUBLESHOOTING
WARRANTY AGAINST DEFECTS
Laser warrants your new product to be free from defects in materials and workmanship for 12 months, from the
date of purchase, provided that the product is used in accordance with accompanying recommendations or
addition to your rights under the Australian
Consumer Law and to other rights and remedies of the consumer under a law in relation to the goods or
services to which the warranty relates.
Through a network of retailers and resellers, Laser will provide you with your choice of a refund, repair, or
exchange (where possible) for this product if it becomes defective within the warranty period. This warranty
will no longer apply where the defect is a result of alteration, accident, misuse, abuse, normal wear and tear,
neglect, or improper storage. Please retain your receipt as proof of purchase
How to make a product warranty claim:
1. Find your receipt with date of purchase. If this is not available, Laser will make an assessment
based on the date of manufacture, condition of the product and type of defect.
2. Please contact your original place of purchase. They will assess the nature of the fault and
refund or replace the product as per their store refund or warranty policy.
3. If your original place of purchase cannot be contacted, please contact Laser with a description
of the fault. To assist our team in providing you with a quick resolution, please include any
photos and/or a short video demonstrating the fault with your product.
• Phone: (02) 9870 3355
• Email: [email protected]
• Online: www.laserco.net/support/warranty and follow the website instructions
• SW, Australia
pt to troubleshoot and resolve the
issue for you without the need to return the product.
5. If it is determined via troubleshooting that your product may be faulty, our team will provide
instructions to have the product returned for assessment. If the product does need to be
returned within the warranty period, Laser will arrange return shipping at no cost to you.
6. Once we receive the product, our experienced technicians will assess it and determine how
best to resolve the issue.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are
entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of
acceptable quality and the failure does not amount to a major failure.
For more
helpful guides
visit us at
LASER
www.youtube.com/LasercoAu
www.laserco.com.au
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
Laser LSH-CAMDBWC lets you see who's at the door remotely via the Laser SmartHome app on your phone, talk to them with 2-way audio, and record footage of visitors or any suspicious activity with the built-in camera. The camera features Full HD video and night vision, so you can see clearly who's there, even in low-light conditions.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Cocoon DY180234 User manual
-
Ring 5D22E9 User guide
-
Ring B08JNR77QY User guide
-
NIGHT OWL DB-WNIP2-SU Owner's manual
-
LASERCO CSH-PLGUSBPM Plug User manual
-
NIGHT OWL WDB-20-V2 Owner's manual
-
-
Bell and Howell BHDC1A User manual
-
Caliber HWC502 Owner's manual
-
Ring Battery Doorbell Plus Video Door Bell User guide
