2. AGI
  3. Incline Support Kit U-Trough Bin Unload

AGI Incline Support Kit U-Trough Bin Unload Owner's manual

  • Hello! I'm a chat assistant that has read through the Installation Instructions for the Incline Support Kit U-Trough Bin Unload. I understand it details mounting the C-channels, installing the bottom flange, and adjusting the base legs. I am ready to answer any specific questions you may have about the installation process or the device itself.
  • How many locations are available to install the c-channels on the trough assembly?
    Are the base leg positions adjustable?
    What should I do after extending base legs?
31134 R0
Revised: AUGUST 2021 1
202103
Incline Support Kit
U-Trough Bin Unload
Installation Instructions
Applicable Model:
Westeel Easy Flow 2
Installation
Mounting the C-Channel (Right and Left)
Assembly Note:
• There are 4 given locations on the trough assembly where the c-channels can be installed, depending on
the ground surface requirements on site.
1C-channel 3Nylon Lock Nut, 1/4"
2Bolt, 1/4" x 3/4"
2
2
3
1
2 31134 R0
Installing the Bottom Flange
1UT Bottom Flange 3Bolt, 7/16" x 1"
2C-channel 4Nylon Lock Nut, 7/16"
Mounting the Base Assembly
4
4
3
3
2
2
2
1
1
Assembly Notes:
• There are various positions that the c-
channels can be adjusted to, depending
on the ground surface requirements on
site.
• Suggested leg configurations are shown
in the image that follows this table.
1Base Assembly
2C-channel
3Bolt, 1/2" x 1-1/4"
4Nylon Lock Nut, 1/2"
3
4
2
1 1
202103 INCLINE SUPPORT KIT – U-TROUGH BIN UNLOAD
31134 R0 3
Extending the Base Legs
Assembly Notes:
• Extend base legs until they contact the
ground or support blocks.
• Tighten the nuts to secure in place.
1Hex Nut, 1"
1
AGI is a leading provider of equipment solutions for agriculture bulk commodities including seed, fertilizer, grain, and feed systems with a growing platform in providing
equipment and solutions for food processing facilities. AGI has manufacturing facilities in Canada, the United States, the United Kingdom, Brazil, South Africa, India and Italy
and distributes its products globally.
P.O. Box 39, Rosenort, Manitoba, R0G 1W0 Canada
P866.467.7207 (Canada & USA) or 204.746.2396 │ F866.768.4852 │ E[email protected]
AGGROWTH.COM aggrowthintl
©Ag Growth International Inc. 2021 │ Printed in Canada
202103 INCLINE SUPPORT KIT – U-TROUGH BIN UNLOAD
/