Logitech YetiPro - Audio Driver Installatation Instruction (Win 7) Operating instructions

Windows 7 YETI PRO AUDIO DRIVER A INSTALLATION INSTRUCTIONS

First, plug your Yeti Pro microphone into a USB 2.0 port on your computer.

Download the zip ﬁle named “Yeti Pro Driver A”.

Move the “Yeti Pro Driver A.zip” ﬁle from your downloads folder to the location you would like to

permanently store the driver ﬁles for your Yeti Pro microphone.

After you have moved the ﬁle, right click the “Yeti Pro Driver A.zip” ﬁle and select “Extract Here”. The

ﬁle “Yeti Pro Driver A.zip” will then be unzipped, leaving a folder called “Yeti Pro Driver A” in the same

location that you placed the zipped ﬁle.

Open the unzipped “Yeti Pro Driver A” and double click the “Setup” application from the list of ﬁles

within the folder.

NOTE: Anytime a .exe ﬁle is loaded on Windows 7, the user is prompted with a “User Account

Control” warning. Click “Yes” when prompted with the “User Account Control” warning to

continue the installation.

Select “Next” to continue the installation.

Select “C:\Program Files\Blue\Yeti_Pro_Audio_Driver” as your install location and select “Install”.

Click “Next” once prompted “Installation Complete”.

Select “Finish” to complete the installation.

Once the installation has completed, from the Control Panel, select “Hardware & Sound”.

• From the “Hardware & Sound” menu, select “Sound”.

• From the “Sound” menu, select the “Playback” tab. Select “Blue Yeti Pro” as your default device.

• From the “Sound” menu, select the “Recording” tab. Select “Blue Yeti Pro” as your default device.

Begin Recording!

10.

11.