2. ROOMS TO GO
  3. 33621930

ROOMS TO GO 33621930 Assembly Instructions

  • Hello! I've reviewed the assembly instructions for the ROOMS TO GO Chest models C2192R-N03-5DXX and C2196R-N03-XXX5D. This document includes a parts list, a hardware list and instructions for assembly also details the use of a tipping restraint for safety. I'm ready to answer your questions about setting up the device.
  • What tool is required for assembly?
    Is assistance recommended for assembly?
    What should I check for in the packing materials?
PART LIST:
ASSEMBLY INSTRUCTIONS
1
ITEM NO: C2192R-N03-5DXX CHEST
No. Description
Sketch Quantity
HARDWARE LIST:
a
No. Description
Sketch Quantity
TIPPING RESTRAINT 1SET
CHEST 1PC
a
1
STEP 1
SKU: 33621930
TOOLS REQUIRED(NOT PROVIDED)
PHILLIPS SCREWDRIVER
Caution: Please read instructions thoroughly before unpacking assembly parts. Sharp, exposed
staple tips can cause injury, therefore, for your protection, please remove any exposed
staple used in packing.
1. We recommend that you should assemble this product with the assistance of another person;
this will make assembly easier, and will help to eliminate damage to the product or injury to
persons during assembly.
2. Be sure to check all packing materials carefully for small parts that may have come loose inside
the carton during shipment.
3. please do not over tighten screws or bolts.
4. Please put all parts on a non-abrasive floor before assembly, and follow the assembly steps to
assemble your newly purchased product correctly and efficiently.
WALL
Completed
WALL
Move the Chest into final
position and use tipping
restraint attach to wall
ITEM NO: C2196R-N03-XXX5D CHEST
33621978
/