ROOMS TO GO 34371699 Assembly Instructions

ROOMS TO GO
Brand
ROOMS TO GO
Model
34371699
Type
Assembly Instructions

ROOMS TO GO 34371699 is a 4-Drawer Chest that needs to be assembled by attaching the Bunn feet to the chest and then mounting it on the wall using the Tipping Restraint to prevent it from tipping over. It comes with an Allen Wrench for assembly and has the following dimensions: Chest: N/A, Bunn Feet: N/A, Tipping Restraint: N/A. The package includes 4 Bunn Feet and 1 Tipping Restraint. For more information on how to assemble the furniture, please refer to the assembly instructions included in the package.

ROOMS TO GO 34371699 is a 4-Drawer Chest that needs to be assembled by attaching the Bunn feet to the chest and then mounting it on the wall using the Tipping Restraint to prevent it from tipping over. It comes with an Allen Wrench for assembly and has the following dimensions: Chest: N/A, Bunn Feet: N/A, Tipping Restraint: N/A. The package includes 4 Bunn Feet and 1 Tipping Restraint. For more information on how to assemble the furniture, please refer to the assembly instructions included in the package.

ASSEMBLY INSTRUCTION
HILB 7169-784 Juno 4 Drawer Chest -SKU 34371699
No Picture
Picture
Description
Allen Wrench
JCBC Bolts (M6)
Dimension
4 x 58mm
6 x P1.0 x 45mm
Qty
1
4
Qty
1
1
4
Part List
Hardware List
Thank you for purchasing this quality product. Be sure to check all packing material
carefully for small parts which may have come loose inside the carton during shipment.
Identify and count all parts and compare with the Hardware List below:
1
2
No
A
B
C
1 of 4
Description
Chest
Bunn Feet
Tipping Restraint
PART DETAILS
A
B
B
B
SPRING WASHER (M6) 6 x 11mm 4
FLAT WASHER (M6) 6 x 19mm 4
Version - 09-11-2020
DO NOT USE SUBTITUTE PARTS. PLEASE CONTACT YOUR RETIAL STORE OR WWW.ROOMSTOGO.COM
WITH SERVICE OR PARTS REPLACEMENT REQUEST
HILB 7169-784 Juno 4 Drawer Chest -SKU 34371699
ASSEMBLY STEP
2 of 4
***Caution: Please read all instructions carefully before starting the assembly process. These
parts are cumbersome and heavy. Therefore, two people are recommended in order to prevent
personal injury and insure the parts are not damaged during the assembly.
Secure Bunn Feet (B) to Chest (A) using 1 JCBC (2) per foot. Tighten bolts using Allen
Wrench (1) provided. The assembly is now complete.
Begin assembly by removing Bunn Feet (B) from bottom of drawer of Chest (A)
STEP 1
STEP 2
AB
B
B
B
A
B
2
A
B
ASSEMBLY STEP
3 of 4
***Caution: Please read all instructions carefully before starting the assembly process. These
parts are cumbersome and heavy. Therefore, two people are recommended in order to prevent
personal injury and insure the parts are not damaged during the assembly.
To prevent the Chest (A) from tipping, mount one side of the Tipping Restraint (C) to the
backside of the Chest (A) and the other side to the wall.
STEP 3
WALL
C
HILB 7169-784 Juno 4 Drawer Chest -SKU 34371699
ASSEMBLY STEP
4 of 4
***Caution: Please read all instructions carefully before starting the assembly process. These
parts are cumbersome and heavy. Therefore, two people are recommended in order to prevent
personal injury and insure the parts are not damaged during the assembly.
Insert card into the slot.
STEP 4
HILB 7169-784 Juno 4 Drawer Chest -SKU 34371699
CARD
Wooden Furniture Care
Protect Your Investment
The beauty of furniture care is that it helps to protect your investment. Fine furniture is an
important purchase. Proper care will help maintain your furniture’s finish and ensure that it
looks great year after year.
Caring For Furniture
Caring for furniture is easy. Following a few simple guidelines will help extend the life of your
furniture.
*Always dust with a polish moistened cloth. Polish cushions the cloth, eliminating the
scratching that occurs with dry dusting. Dust will scratch the furniture surface if not removed
quickly. Use a soft, clean cloth that won’t scratch the surface. Avoid coarse or scratchy
materials or fabrics.
*Avoid using soap and water on furniture. Water can penetrate the finish and raise the grain on
wood, causing damage.
The Enemies of Furniture
Many common problems in furniture care are caused by the elements. If you are aware of
these troublemakers, the resulting damage can easily be avoided.
*Sunlight’s ultraviolet rays can damage wood finishes. Arrange furniture out of direct sunlight,
use sun screening drapes during intense sunlight hour, rotate furniture in place and in room
arrangements.
*Liquid spills will damage furniture if not removed promptly. Use coasters under beverage
glasses saucers under cups and flowerpots. If a spill occurs, immediately blot it gently without
rubbing the surface.
*Heat creates a chemical change in the furniture finish. Which can result in a white spot. Use
protective pads under hot dishes, utensils or cooking appliances.
*Cyclic changes in temperature can damage furniture. I-lot blasts of air such as those found
from central heating should be avoided because they cause extreme localized drying of the
wood.
Tips for Better Dusting
*Be sure in use the sauce type of polish consistently. Your furniture will appear cloudy or
streaky if oil-based and wax-based polishes are interchanged.
*Always use a fine furniture polish when dusting. Never dry dust, as it could cause microscopic
scratches on your furniture surface. Remember to change dusting clothes frequently since a
dirty cloth may scratch your furniture’s surface.
*Spray your furniture surface evenly, but not too generously. Wipe in a circular motion with a
soft, clean cloth to clean and loosen the old polish.
*Then, buff until completely dry for a beautiful shine and a smudge-resistant finish. For wood
trim, spray polish on the cloth first, and then dust.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

ROOMS TO GO 34371699 Assembly Instructions

ROOMS TO GO
Brand
ROOMS TO GO
Model
34371699
Type
Assembly Instructions

ROOMS TO GO 34371699 is a 4-Drawer Chest that needs to be assembled by attaching the Bunn feet to the chest and then mounting it on the wall using the Tipping Restraint to prevent it from tipping over. It comes with an Allen Wrench for assembly and has the following dimensions: Chest: N/A, Bunn Feet: N/A, Tipping Restraint: N/A. The package includes 4 Bunn Feet and 1 Tipping Restraint. For more information on how to assemble the furniture, please refer to the assembly instructions included in the package.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents