Orei DA34 User manual

Brand: Orei

Model: DA34

Type: User manual

This manual is also suitable for

AA6000

The Orei DA34 is a digital to analog audio decoder that can transform digital audio signals from sources like Blu-Ray players or game consoles into high-quality analog audio. It supports various digital audio formats including Dolby Digital (AC3), DTS, and PCM. With its plug-and-play design, you can effortlessly connect it to your audio system using either an optical (Toslink) or digital coaxial cable. The DA34 features both stereo RCA outputs for connecting to amplifiers or speakers, as well as a 3.5mm headphone output for private listening.

The Orei DA34 is a digital to analog audio decoder that can transform digital audio signals from sources like Blu-Ray players or game consoles into high-quality analog audio. It supports various digital audio formats including Dolby Digital (AC3), DTS, and PCM. With its plug-and-play design, you can effortlessly connect it to your audio system using either an optical (Toslink) or digital coaxial cable. The DA34 features both stereo RCA outputs for connecting to amplifiers or speakers, as well as a 3.5mm headphone output for private listening.

Digital to Analog

Audio Decoder

USER Manual

2

Table of Contents

1.0 Introduction

2.0 Specifications

3.0 Package Contents

4.0 Panel Descriptions

5.0 Connection Diagram

3

1.0 Introduction

The Digital to Analog Audio Decoder features an integrated

24 bit audio DSP. This unit can decode a variety of digital

audio formats, including Dobly Digital (AC3), DTS and PCM.

It can simply connect an Optical (Toslink) or Digital Coaxial

Cable to the input, then the decoded audio can be transmitted

as 2 channel analog audio via the Stereo RCA output or the

3.5mm output (suitable for headphones) simultaneously.

1.1 Features

1.Decode Dolby Digital (AC3), DTS or PCM digital audio to

stereo audio output.

2.Support PCM 32KHz.44.1KHz,48KHz,96KHz sample

4

frequency audio decode.

3.Support Dolby Digital 5.1 samples ,DTS-ES6.1 samples

audio decode.

4.No need to install drivers. Portable, flexible, plug and play.

2.0 SPECIFICATIONS

Input Ports: 1 x Optical (Toslink), 1 x Digital Coaxial.

Output Ports: 1 x RCA (L/R), 1 x 3.5mm (Headphone).

Signal to Noise Ratio: 120db.

Degree of Separation: 85db.

Frequency Response: (20Hz ~ 20KHz) +/- 0.5db.

Dimensions (mm): 72(D)x55(W)x20(H).

Weight (g): 40.

5

3.0 PACKAGE CONTENTS

Before attempting to use this unit, please check the packaging

and make sure the following items are contained in the

shipping carton:

1) Audio Decoder ---------------1PCS

2) 5V/1A DC Adaptor----------------------1PCS

3) User Manual. -------------------1PCS

4.0 PANEL DESCRIPTIONS

Please study the panel drawings below and become familiar

with the signal input(s), output(s) and power requirements.

6

Back Panel: Top Panel: Front Panel

5.0 CONNECTION DIAGRAM

1. Connect a source such as a Blu-Ray Player, game

console, A/V Receiver, etc. to the audio Decoder SPDIF

7

input by fiber cable or Coaxial input by coaxial calbe.

2. Connect a headphone or analog audio amplifier to the

audio output on the Decoder.

3.Power on the Decoder and select the switch to your

need audio input port.

1
2
3
4
5
6
7

Orei DA34 User manual

Brand: Orei

Model: DA34

Type: User manual

This manual is also suitable for

AA6000

The Orei DA34 is a digital to analog audio decoder that can transform digital audio signals from sources like Blu-Ray players or game consoles into high-quality analog audio. It supports various digital audio formats including Dolby Digital (AC3), DTS, and PCM. With its plug-and-play design, you can effortlessly connect it to your audio system using either an optical (Toslink) or digital coaxial cable. The DA34 features both stereo RCA outputs for connecting to amplifiers or speakers, as well as a 3.5mm headphone output for private listening.

Other documents