Kyosho MZN112 MAZDA RX-7 FD3S User manual

Kyosho
Brand
Kyosho
Model
MZN112 MAZDA RX-7 FD3S
Type
User manual

This manual is also suitable for

Kyosho MZN112 MAZDA RX-7 FD3S is a 1/27 scale, fully assembled electric radio-controlled car model. It requires 4xAA batteries, sold separately. The car has a top speed of 40km/h and a run time of approximately 15 minutes. Steering is controlled by a proportional radio system, allowing for smooth and precise control. The car is also equipped with independent suspension and a differential, providing excellent handling and stability.

In addition to the basic features, Kyosho MZN112 MAZDA RX-7 FD3S also has a number of advanced features that make it ideal for experienced RC enthusiasts. These features include:

Kyosho MZN112 MAZDA RX-7 FD3S is a 1/27 scale, fully assembled electric radio-controlled car model. It requires 4xAA batteries, sold separately. The car has a top speed of 40km/h and a run time of approximately 15 minutes. Steering is controlled by a proportional radio system, allowing for smooth and precise control. The car is also equipped with independent suspension and a differential, providing excellent handling and stability.

In addition to the basic features, Kyosho MZN112 MAZDA RX-7 FD3S also has a number of advanced features that make it ideal for experienced RC enthusiasts. These features include:

Before beginning assembly, please read these instructions thoroughly.
MZN112-T01
Side Body Mount (L)
Side Body Mount (R)
Body
Window Shield
R
THE FINEST RADIO CONTROL MODELS
INSTRUCTION SHEET
No.MZN112
90mm
Narrow
Tools : Must be prepared.
*Cutter Knife. *Nippers *Adhesive for plastic
*A Phillips Screwdriver
(Precision type or a small sized)
+ +
MAZDA RX-7 FD3S
For MINI-Z Racer MR-03N RM Type / MR-015 RM Type
White Body Set (Non Decoration)
2
For painting. use plastic model paints.
Attach each part as required.
Painting should be done before assembling.
Rear Mount Type (RM Type) Wheelbase (M)
1
Preparation of Chassis
Assemble the chassis as shown below.
Motor mounting position
Adjustment of Wheelbase / Front Tread
2
2 x 5mm
TP Screw
Replace the front body mount
with the one included in the set.
Front Body Mount
TP
Receiver Antenna
Bend the receiver antenna as shown below.
Receiver Antenna
2x5mm
Front body mount.
Chassis
Caution : Do not screw-in
excessively.
Antenna Cord
2mm
2x6mm
Caution : Do not screw-in
excessively.
< >
< Only for 27MHz >
30mm
Page is loading ...
  • Page 1 1
  • Page 2 2

Kyosho MZN112 MAZDA RX-7 FD3S User manual

Kyosho
Brand
Kyosho
Model
MZN112 MAZDA RX-7 FD3S
Type
User manual
This manual is also suitable for

Kyosho MZN112 MAZDA RX-7 FD3S is a 1/27 scale, fully assembled electric radio-controlled car model. It requires 4xAA batteries, sold separately. The car has a top speed of 40km/h and a run time of approximately 15 minutes. Steering is controlled by a proportional radio system, allowing for smooth and precise control. The car is also equipped with independent suspension and a differential, providing excellent handling and stability.

In addition to the basic features, Kyosho MZN112 MAZDA RX-7 FD3S also has a number of advanced features that make it ideal for experienced RC enthusiasts. These features include:

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents