SonicWALL SuperMassive 9800 Installation guide

Type
Installation guide

This manual is also suitable for

SonicWALL SuperMassive 9800 is a network security appliance that provides comprehensive protection for your network. It features two solid state drives (SSD) with 80GB of capacity for storage, ensuring fast and reliable performance. The SuperMassive 9800 is easy to install and maintain, with hot-swappable hard drives that can be replaced without powering down the appliance. It also supports a variety of security features, including firewall, intrusion prevention, and anti-malware protection.

SonicWALL SuperMassive 9800 is a network security appliance that provides comprehensive protection for your network. It features two solid state drives (SSD) with 80GB of capacity for storage, ensuring fast and reliable performance. The SuperMassive 9800 is easy to install and maintain, with hot-swappable hard drives that can be replaced without powering down the appliance. It also supports a variety of security features, including firewall, intrusion prevention, and anti-malware protection.

SonicWall® SuperMassive™ 9800 SSD
Hard Drive Replacement and Installation
This document provides instructions for removing and installing a
replacement hard drive in your SonicWall SuperMassive 9800 network
security appliance.
A replacement hard drive can be inserted into either one of the two
drive slots on the front of your SuperMassive 9800 appliance.
Removing the Defective Hard Drive from the
Appliance
To remove a defective hard drive from the SonicWall SuperMassive
9800, complete the following steps:
1 Power down the appliance.
2 Press the square button with the orange circle on the right side of
the defective drive to pop-out the drive
handle.
3 Grasp the drive handle and pull the drive straight out to remove it
from the slot.
Installing a New SSD Hard Drive into the Appliance
To install a new SuperMassive 9800 SSD Hard Drive, complete the
following steps:
1 Remove the new hard drive from the replacement shipping
package.
2 Pop open the drive handle on the new hard drive by pressing the
square button with the orange circle on the right side of the drive.
3 Insert the new drive into the empty slot, label side up with the
handle sticking out.
4 Press the drive firmly into place to seat the connectors, and then
close the handle.
Remplacement et installation du disque
SSD de l'appareil SonicWall®
SuperMassive™ 9800
Ce document indique la marche à suivre pour retirer et installer un
disque dur de remplacement dans votre appareil de sécurité réseau
SonicWall SuperMassive 9800.
Vous pouvez insérer un disque dur de remplacement dans l'un des
deux logements de disque situés à l'avant de l'appareil SuperMassive
9800.
Retrait du disque dur défectueux de l'appareil
Pour retirer un disque dur défectueux de l'appareil SonicWall
SuperMassive 9800, suivez les étapes suivantes :
1 Désactivez l'alimentation de l’appareil.
2 Appuyez sur le bouton carré avec un cercle orange situé à la droite
du disque défectueux pour faire sortir la poignée du disque.
3 Saisissez la poignée du disque et tirez ce dernier droit vers l'arrière
pour le retirer de son logement.
Installation d'un nouveau disque SSD dans
l'appareil
Pour installer un nouveau SuperMassive 9800 SSD Hard Drive, suivez
les étapes suivantes :
1 Retirez le nouveau disque dur de son emballage.
2 Appuyez sur le bouton carré avec un cercle orange situé à la droite
du disque pour faire sortir la poignée du nouveau disque.
3 Insérez le nouveau disque dans le logement vide, avec l'étiquette
vers le haut et la poignée en saillie hors de l'appareil.
4 Poussez le disque fermement pour que les connecteurs se mettent
en place, puis fermez la poignée.
SonicWall Austausch der Festplatte und
Installation
Dieses Dokument enthält Anweisungen zum Entfernen und Installieren
von schwer Ersatz in Ihrem SonicWall Network Security-Appliance
fahren.
Eine Ersatz-Festplatte kann in keinem von den zwei Festplatten-Slots
auf der Vorderseite des Gerätes eingefügt werden.
Entfernen der Defekten Festplatte vom Gerät
Führen Sie die folgenden Schritte aus, um eine defekte Festplatte von
der Vorderseite des SonicWall entfernen:
1 Es ist erforderlich, die Appliance abzuschalten.
2 Drücken Sie die Quadrat-Taste mit dem Orangen Kreis auf der
rechten Seite des fehlerhaften Laufwerks Pop-out-der Griff des.
3 Fassen Sie den Griff des und ziehen Sie das Laufwerk gerade
heraus, um es aus dem Steckplatz heraus.
Installation einer Neuen Festplatte in das Gerät
Um eine neue Festplatte zu installieren, führen Sie die folgenden
Schritte aus:
1 Entfernen Sie die neue Festplatte aus den Versand Paket.
WARNING: The SuperMassive 9800 SSD Hard Drive is not hot
swappable. Power down the appliance before removing or
installing the module.
SSD Hard Drives
Two Solid State Drives (SSD) with 80GB
of capacity for storage (HD0 and HD1)
WŽǁĞƌďƵƩŽŶ
Press to turn the
appliance On or O
WARNING: Do NOT insert anything except the SuperMassive
9800 SSD Hard Drive into the appliance slot.
AVERTISSEMENT : Débranchez l’alimentation de l’appareil avant de
retirer ou d’installer le disque dur.
AVERTISSEMENT : N'INSÉREZ AUCUN OBJET autre que le
SuperMassive 9800 SSD Hard Drive dans le logement de
l'appareil.
WARNUNG: Vor dem Entfernen oder Installieren der Festplatte
muss die Appliance ausgeschaltet werden..
WARNUNG: Stecken Sie nichts außer die SuperMassive 9800
Festplatte im Gerät-Steckplatz.
2 Pop öffnen Sie den Laufwerk-Griff auf die neue Festplatte durch
Drücken der Quadrat-Taste mit dem Orangen Kreis auf der rechten
Seite des Laufwerks.
3 Legen Sie das neue Laufwerk in den leeren Steckplatz, bedruckten
Seite nach oben mit dem Griff herausragen.
4 Drücken Sie das Laufwerk fest einrastet, die Anschlüsse zu setzen,
und schließen Sie dann das Handle.
SonicWall SuperMassive 9800 硬盤更換
和安裝
該文件規定了拆除和安裝在 SonicWall SuperMassive 9800
絡安全設備更換硬盤驅動器的說明。
更換硬盤驅動器可以插入到任何一個你的 SuperMassive
9800 設備的前兩個驅動器插槽中。
刪除從設備故障硬盤驅動器
取下
SuperMassive 9800
家電有故障的硬盤驅動器:
1 需要關閉設備電源
2 按壓右側有缺陷的驅動器彈出驅動器手柄的橙色圓圈的方形按
鈕。
3 握住驅動器手柄,將長驅直入,將其從插槽中取出。
安裝新的硬盤驅動器到設備
要安裝新的
SuperMassive 9800
硬盤完成以下步驟:
1 拆下更換運輸包裝新的硬盤驅動器。
2 彈出按方形按鈕右側的驅動器的橙色圓圈打開新的硬盤驅動器
上的驅動器手柄。
3 將新的驅動器插入空插槽,標籤的一面朝上用手柄露在外面。
4 用力按下驅動到位座位連接器,然後關閉句柄。
This hard drive is for use only with SonicWall appliances indicated below. Use of this hard
drive with a SonicWall appliance that is not approved will void the warranty for that
appliance. This hard drive is provided as a replacement and is provided on an “as is” basis
without warranty of any kind.
This hard drive, SonicWall SuperMassive 9800 Series Hard Drive FRU is approved for use
with:
SonicWall SuperMassive 9800 SKU 01-SSC-0200
For information and related documents, see the following website:
https://support.sonicwall.com
Copyright © 2019 SonicWall Inc. All rights reserved.
SonicWall and SuperMassive are trademarks or registered trademarks of SonicWall Inc.
and/or its affiliates in the U.S.A. and/or other countries. All other trademarks are property
of their respective owners.
The information in this document is provided in connection with SonicWall Inc. and/or its
affiliates' products. No license, express or implied, by estoppel or otherwise, to any
intellectual property right is granted by this document. SonicWall Inc. and/or its affiliates do
not make any commitment to update the information contained in this document. For more
information, visit http://www.sonicwall.com/legal.
SuperMassive 9800 SSD Hard Drive Installation Guide
Updated - August 2019
232-003455-51 Rev A
警报 : 在卸下或安裝硬盤驅動器之前,必須先關閉設備電源
警报 : 請勿將除磁盤驅動器之外的任何內容插入插槽
Legend
WARNING: A WARNING icon indicates a potential for property damage,
personal injury, or death.
CAUTION: A CAUTION icon indicates potential damage to hardware or loss of
data if instructions are not followed.
IMPORTANT, NOTE, TIP, MOBILE, or VIDEO: An information icon indicates
supporting information.
SonicWall®
SuperMassive™ 9800
SSD Hard Drive
Installation Guide
  • Page 1 1
  • Page 2 2

SonicWALL SuperMassive 9800 Installation guide

Type
Installation guide
This manual is also suitable for

SonicWALL SuperMassive 9800 is a network security appliance that provides comprehensive protection for your network. It features two solid state drives (SSD) with 80GB of capacity for storage, ensuring fast and reliable performance. The SuperMassive 9800 is easy to install and maintain, with hot-swappable hard drives that can be replaced without powering down the appliance. It also supports a variety of security features, including firewall, intrusion prevention, and anti-malware protection.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI