Dakota Digital VHX-51F-PU Mounting Manual

Manual # 650512A

VHX-51F-PU

Dakota Digital VHX Instrument Installation

For 1951-52 Ford Pickup

Your new VHX-51F-PU kit includes:

Installation

Control Box

(2) CAT5 Cables

Universal Sender Pack

Installation Manuals

VHX Display

1. Remove the stock gauges from the dash and retain the hardware for reassembly.

Ford Speed Adapter

Switch Assembly

Manual # 650512A

WARNING: This product can expose you to chemicals including lead, which is known to the State of

California to cause cancer and birth defects or other reproductive harm. For more information go to

www.P65Warnings.ca.gov

3. Connect one end of the two (2)

CAT5 cables to the back of each

VHX gauge. Take care when

routing the other ends of the CAT5

cables to the control box mounting

location.

2. The VHX system is a direct replacement of the original cluster, so use the two mounting tabs on

each gauge to secure the VHX system to the dash using the stock hardware.

4. Refer to the main manual for wiring instructions to complete the VHX installation.