Dakota Digital BIM-01-2-MSD
The Dakota Digital BIM-01-2-MSD is a Bus Interface Module designed to read engine information from MSD Atomic EFI TBI kits. It connects to the MSD EFI through the included Y-adapter harness and can be plugged in line with the Atomic handheld display or the throttle body. The BIM-01-2-MSD has two interface (I/O) ports that can be connected to a gauge system or to another module, allowing several units to be daisy chained together.
The engine and transmission information that is available from the BIM-01-2-MSD depends on the EFI module programming and add-ons. The possible values are:
Dakota Digital BIM-01-2-MSD
The Dakota Digital BIM-01-2-MSD is a Bus Interface Module designed to read engine information from MSD Atomic EFI TBI kits. It connects to the MSD EFI through the included Y-adapter harness and can be plugged in line with the Atomic handheld display or the throttle body. The BIM-01-2-MSD has two interface (I/O) ports that can be connected to a gauge system or to another module, allowing several units to be daisy chained together.
The engine and transmission information that is available from the BIM-01-2-MSD depends on the EFI module programming and add-ons. The possible values are:
Dakota Digital BIM-01-2-MSD
The Dakota Digital BIM-01-2-MSD is a Bus Interface Module designed to read engine information from MSD Atomic EFI TBI kits. It connects to the MSD EFI through the included Y-adapter harness and can be plugged in line with the Atomic handheld display or the throttle body. The BIM-01-2-MSD has two interface (I/O) ports that can be connected to a gauge system or to another module, allowing several units to be daisy chained together.
The engine and transmission information that is available from the BIM-01-2-MSD depends on the EFI module programming and add-ons. The possible values are:
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI