a) Setting program time switch
Analog time switch
Push the riders towards the center
for reduced temperature setting. Set
week day and/or time opposite the
arrow.
Digital time switch
Please see user guide supplied with
the digital time switch
b) Temperature setting
Normal setting: 0
Turn clockwise (+) and the flow
temperature will rise.
Turn counterclockwise (–) and the
flow temperature will decrease.
c) Function switch
Heating is cut out while frost
protection is still active.
ECL 9350 still controls the
hot-water service function.
Constant reduced
temperature.
Automatic switch between
normal and reduced
temperature according to
time switch setting.
Constant normal
temperature
The control is cut out. Valve
motor is operated manually.
Boiler and pump are
constantly cut in.
e) ON and fault indication
ECL 9350
VI.76.S6.02
087R9409
User guide
Potentiometer settings
f) Heat curve slope
Heat curve
g) Minimum boiler temperature
h) Maximum flow temperature
i) Reduced temperature setting
Set the reduced temperature setting
in 0-14 for parallel heat curve
displacement
Set the reduced temperature setting
in "AUTO" for flow temperature
increase at reduced outdoor
temperatures.
In setting
heating is cut out, i.e.
the valve closes and the pump
stops. Frost protection is still active.
j) Hot-water-service temperature
k) Miniswitches (see instruction)
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Danfoss ECL 9300/9310 Operating instructions
-
-
-
-
-
-
-
Danfoss ECL Comfort 310 Installation guide
-
-