Kenroy Home 60509 Installation guide

MODEL: 60509

ASSEMBLY INSTRUCTIONS

READ AND SAVE THESE INSTRUCTIONS

READ INSTRUCTIONS ALL THE WAY THROUGH PRIOR TO ASSEMBLY.

Assembly Time: 2 Minutes.

IMPORTANT NOTES:

The extender cord need to be connected with 60506, 60507 OR 60508 (sold separated).

UNPACK THE EXTENDER CORD

The following parts should be included in your LED light kits; 12'

extender cord

1.) The extender cord need to be connected with 60506, 60507 (sold separated).

ASSEMBLY INSTRUCTIONS

For 60506 (sold separated):

2.) Disconnect the connector between solar panel and the first LED light, Join the connectors and

screw the caps tightly together as shown.

For 60507 (sold separated):

3.) Disconnect the connector at the end of the first LED light, Join the connectors and screw the

caps tightly together as shown.