Paxton Net2 USB/RS485 plug-in converter User guide
- Type
- User guide
Ins-30074 Net2 USB/RS485 plug-in converter
RS485 Network connection
This module is designed to assist in the fault nding and testing of individual ACU's by
removing the need for a wired data line connection. Analysis can be easily done by taking
a laptop PC to the ACU and connecting directly into its communications port.
No additional 'end of line' resistors are required.
Pull off the screw terminal block from the network port on the ACU and replace it with this
module. Connect the module to the USB port on the PC and run the Net2 software.
Remove Net2 data cable plug
and replace with this module.
Technical Support
Technical help is available: Monday - Friday from 07:00 - 19:00 (GMT)
Saturday from 09:00 - 13:00 (GMT)
01273 811011 [email protected]
This device requires the PC to have a Paxton USB driver loaded. Please contact Technical
Support if software or further assistance is required.
Software - Requires Net2 v4.13 or later
No further conguration is required. The Net2 software will look for the USB device. This
Net2 device will NOT show as a serial port in the PC software.
Documentation on all Paxton products can be found on our website - http://www.paxton.co.uk/
17/11/2011
IMPORTANT: Ensure that the module is only
connected to the RS485 data port.
The PCB may be damaged if connected to
another port in error.
1 r e d a e R
:
n o i
t
u a C y l n o
s r
e d a
e r C D
V 2 1 r o F
2
r e
d
a e R
12V
Red LED
Amber LED
Green LED
Data/D0
Clock/D1
Media Detect
0V
12V
Red LED
Amber LED
Green LED
Data/D0
Clock/D1
Media Detect
0V
0V
Expansion
Rx
Tx
RS485 Network
CA T5 Cable Coding
n r G / t h W
e r a p s r o n e e r c S
a t a d m o r f s e r o c
e
l b a c
n e e
r G
g n r O
/ t h W
e g n
a r O
Net2 plus
PLACE SERIAL
NUMBER
LABEL HERE
V
0
m r A
e
s n e S
M O C
. O . N
.
.
Green
White/Green
1
Screen or spare cores from
network cable
White/O r ang e
3
O r ang e
4
R el a y 2 R el a y 1 Inputs P owe r
C A T5 cable codin g
Network
Net2 classic
2
PLACE SERIAL
NUMBER
LABEL HERE
+12V
0V
N.C.
N.O
Com
N.C.
N.O
Com
Alarm Output
0V
Contact
0V
Exit
0V
T amper
PSU
http://paxton.info/107
123456
0889
Net2 plus control unit
Net2 classic control unit
Paxton
-
1
Paxton Net2 USB/RS485 plug-in converter User guide
- Type
- User guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Paxton Net2 Classic Datasheet
-
-
-
-
-
-
-
-
-