Page is loading ...
DM220
Stand-mount/Bookshelf loudspeaker system
Product Summary
●
All the distinctive qualities of the DM110 with a third driver extending both frequencies
response and power handling.
●
Total spectrum capability – pop, jazz, rock or classical. And of course the benefits of B&W’s
advanced optimisation techniques in the design enclosure. Alvin Gold said “the sense of
vividness and expressive nature of the 220 is further proof that B&W have got most of the
right answers”
Technical highlights
●
Refinements in the enclosure give the DM series reduced in lower mid-band coloration and a
dramatic improvement in transient response.
●
Advanced optimisation techniques employing modal analysis of the cabinet structure were a
design feature of the enclosure in all four monitors.
B&W Loudspeakers Ltd reserves the right to amend details of the specifications without notice in line with technical developments. E & OE. All trademarks acknowledged.
www.bwspeakers.com
Drive Units
Frequency Response
Sensitivity
1 x 26mm dome/coil construction of
special polymide material
2 x 200mm nominal piston dia and
26mm high temperature voice coil with
critically impregnated composite short
fibre cone
± 3dB 53Hz to 20kHz
90dB (2.83V, 1m)
Power Handling
Dimensions
Finish
10W – 100W
Height: 680mm Width: 290mm
Depth: 320mm
American Walnut or Black Ash vinyl
/
