Black Box FO020 Datasheet

Type
Datasheet
Install Hot Melt fiber optic
connectors —no epoxy, no mess.
Install Hot Melt fiber optic
connectors —no epoxy, no mess.
Hot Melt Termination Tool Kit
© 2007. All rights reserved. Black Box Corporation.
FREE 24-hour Tech Support: 724-746-5500
blackbox.com
10/2/2007
#26768
FEATURES
Use to terminate Hot Melt ST
®
, SC, and FC connectors.
Included Hot Melt Oven heats the connector adhesive
to the exact temperature, bonding it securely to the
fiber cable.
Oven heats up fastready to use in less than four
minutes.
Heater block ensures the precise amount of heat
transfer and helps the oven to cool down quicker.
Built-in cooling tower.
Item Code
Hot Melt Termination Tool Kit FT650
You may also need…
Hot Melt Connector ST Multimode with White Boot FO020
You can also order the oven by itself…
6-Port Hot Melt Oven FT655
For polishing ST, SC, and FC Hot Melt connectors, we offer…
Polishing Fixture
Co-Polymer FT654
Stainless Steel FT652
To use your kit with LC connectors, order…
LC Polishing Puck, Stainless Steel FT653
6-Port Hot Melt Oven
(FT655)
Universal connector
holders
Holder handles
100X microscope
Safety glasses
Scribe
Crimp tool with 3M die set
Jacket stripper
Buffer stripper
Pair of electrician’s scissors
Marker
Ruler
Polishing pads
1-µm polishing film
Stainless Steel Polishing
Fixture for ST, SC, and FC
(FT652)
Canned air dispenser
Water bottle
120-ft. roll of masking tape
Soft, lint-free wipes
Alcohol-soaked pads
Alcohol dispenser bottle
Flip-top debris bottle
Plastic box, utility pouch,
and tool roll
Templates and manuals
Hard shell case with keys
WHAT‘S INCLUDED
  • Page 1 1

Black Box FO020 Datasheet

Type
Datasheet

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI