Page is loading ...
In most cases, the keys on
this remote perform the same
functions as the keys on your
original remotes once youโve
programmed this remote to
operate your components.
Many keys on this remote
have other functions as well.
Illuminated " U"๎๎ key
serves as an indicator light to
provide feedback.
Device keys (TV,
-๎/U๎๎๎U๎/๎, ๎6๎,
6๎,U๎18) put the remote in
the right mode to control your
device.
Backlight key (
) turns
backlighting on/off.
๎1๎๎๎ and ๎๎ 1 put the
remote in menu/guide mode,
which makes the ๎๎ร6"๎ร
keys serve as arrow keys;
they also access the same
features as the keys on your
original remotes.
๎๎ and 6"๎ keys have dual
functions: they can act as
navigation keys in menu
systems as well as channel
and volume controllers
outside the menus. The
CH keys also provide skip
forward and skip back control
for DVD players and DVRs
that support this functionality.
Battery Saver
Your universal remote control saves battery power by
automatically turning off if any key is pressed for more than
60 seconds. This saves your battery life should your remote
get stuck in a place where the keys remain depressed, such as
between sofa cushions.
Universal Remote Control
Ownerโs Manual
RCR412BR / RCR412SR / RCR412SIR
Manual del Propietario (parte posterior)
Care and Maintenance
Uรร๎iiยซรร๎
iรรi๎๎รiร`รรยฐร๎vร๎รร}iรรรรiร]รร๎ยซiร๎รร`รรร๎๎๎i`๎>รi๎รยฐ
Uรร1รiร>๎`รรร๎รiรร๎
iรรi๎๎รiร๎๎๎รร๎๎ร๎๎ร๎>๎รรi๎ยซiร>รรรiร
environments.
Uรร๎>๎`๎iรร๎
iรรi๎๎รiร}i๎ร๎รร>๎`รV>รivร๎๎รยฐร๎๎๎ยฝรร`ร๎ยซร๎รยฐ
Uรร๎iiยซรร๎
iรรi๎๎รiร>ร>รรvร๎๎ร`รรรร>๎`ร`๎รรยฐ
Uรร7๎ยซiรร๎
iรรi๎๎รiรร๎ร๎
ร>ร`>๎ยซรV๎๎ร๎
ร๎VV>ร๎๎๎>๎๎รรร๎ร๎iiยซร๎รร
looking new.
Uรร๎๎`๎vร๎๎}ร๎รรร>๎ยซiร๎๎}รร๎ร๎
รร๎
iรรi๎๎รiยฝรร๎๎รiร๎>๎ร`iร๎ViรรV>๎ร
cause malfunction and invalidate its warranty.
SAVE THIS MANUAL AND THE CODE LISTS!
Remote controls can sometimes lose their programming
when you change the batteries. Make sure you keep the
manual and code lists in a safe place so that you can
reprogram the remote if you need to.
Tip: This remote is already programmed to operate
most RCA-branded TVs, VCRs, DVD players and satellite
receivers. Just press the corresponding keyโDVD for
>ร๎6๎รยซ๎>รiร]ร/6รv๎รร>รรi๎iร๎ร๎๎๎]ร-๎/U๎๎๎U๎/๎รv๎รร>ร
ร>รi๎๎๎รiรรiVi๎รiร]ร6๎,U๎18รv๎รร>ร6๎,ยฐ
Your universal remote requires two AA alkaline batteries
(batteries may or may not be included, depending on model).
To install the batteries:
1. Remove the battery compartment
cover.
2. Insert the batteries, matching the
batteries to the (+) and (โ) marks
inside the battery compartment.
3. Push the battery cover back into place.
Battery Precautions:
Uร๎๎ร๎๎รร๎๎รร๎๎`ร>๎`ร๎iรรL>รรiร๎iรยฐร
Uร๎๎ร๎๎รร๎๎รร>๎๎>๎๎๎i]รรร>๎`>ร`ร๎ญV>รL๎๎๎รข๎๎Vยฎร๎รร
รiV๎
>ร}i>L๎iร๎ญ๎๎V๎i๎๎V>`๎๎ร๎ยฎรL>รรiร๎iรยฐ
Uร๎๎ร>รรรรi๎๎รiร๎๎`]รรi>๎ร๎รรร๎ร๎๎๎รรรL>รรiร๎iรรยซร๎๎ยซร๎รร
>๎`รรiVรV๎iร๎รร`๎รยซ๎รiร๎vรร๎
i๎ร๎๎ร>VV๎ร`>๎Viรร๎ร๎
ร๎๎V>๎ร
and National Regulations.
To use this universal remote with your home entertainment
system, ๏ฌrst you need to program it to control your devices.
There are four ways you can program the universal remote to
operate your devices:
Uร /๎
iรAuto Code Search goes automatically through all the
codes for the device youโre trying to control. Itโs the easiest
method, but it can sometimes take longer than some of the
other programming methods.
Uรร /๎
iรBrand Code Search searches through the codes for
select brands of devices. Itโs not as easy as the auto code
search, but it can be faster.
Uรร /๎
iรDirect Code Entry lets you enter a code from the
accompanying code list for your brand of device. Itโs not as
easy as the other methods, but itโs potentially the fastest
method.
Uรร /๎
iรManual Code Search lets you manually go through
all the codes for the device youโre trying to control.
Testing the Code for Maximum Functionality
1. Try a variety of the deviceโs functions with the remote. If
some device features donโt work, go to next step to try a
different code.
2. Repeat the Auto Code Search Method from the beginning.
7๎
i๎รร๎รรร`iร๎Viรรรร๎รร๎vv]ร`๎ร๎๎รรรร๎ยซรรi>รV๎
๎๎}ยฐร
Instead, with the unit now off, continue to press the PLAY
key every 5 seconds until the unit turns back on.
3. Once the unit turns back on, press the REVERSE key on the
remote every 2 seconds until your device turns off again.
7๎
i๎รร๎รรร`iร๎Viรรรร๎รร๎vvร>}>๎๎]รยซรiรรรร๎
iร-/"*ร๎iรยฐ
4. Test the keyโs functionality again by attempting to control
a variety of the deviceโs functions. If the code that has
been stored controls the majority of the deviceโs functions,
programming is complete. If the code stored does not give
maximum functionality, try another code.
Auto Code Search
The Auto Code Search goes automatically through all the
V๎`iรรv๎รรร๎
iร`iร๎Viรร๎รยฝรiรรรร๎๎}รร๎รV๎๎รร๎๎ยฐร7๎
i๎รร๎รรw๎`ร
the one that operates your device, you can stop the search and
store that code.
1. Manually turn on the device you
want to control.
2.ร *รiรรร>๎`ร๎
๎๎`รร๎
iร`iร๎Viร๎iรรร๎รรร>๎รรร๎รยซร๎}ร>๎ยฐร7๎
๎๎iร
youโre holding down the device key, use your other hand
to press and hold the remoteโs " U"๎๎รkey at the same
time.
3.ร 7>๎รรร๎ร๎๎รร๎
iร" U"๎๎ร๎iร comes on and stays on. Then
release both keys.
4. Point the remote directly at the
front panel of the device you
want to control. Press PLAY on
the remote and wait 5 seconds.
The remote is testing a batch of
10 codes on your device.
Did your device turn off?
YES: Go to step 5.
NO: Press PLAY again. The remote tests the next batch of
10 codes.
ร ๎iiยซรยซรiรร๎๎}ร*๎๎9รiรiรรรxรรiV๎๎`รรร๎ร๎๎รร๎รรร`iร๎Viร
turns off.
5. 7๎
i๎รร๎รรร`iร๎Viรรรร๎รร๎vv]รยซรiรรร
the REVERSE key on the remote
and wait at least 2 seconds.
The remote tries the last of the
previous ten codes.
Did your device turn on?
YES: Press the STOP key. Youโre
done! Youโve programmed this
device key.
NO: Press REVERSE again. The remote tests the next
code in the batch.
ร ๎iiยซรยซรiรร๎๎}ร,๎6๎,-๎รiรiรรรรรรiV๎๎`รรร๎ร๎๎รร๎รรร`iร๎Viร
รรร๎รรL>V๎ร๎๎ยฐร7๎
i๎ร๎รร`๎iร]รยซรiรรร-/"*ยฐ
Note: If you accidentally press the REVERSE key after your
device turns on, press the FORWARD key. Then, wait two
seconds to see if your device turns off again.
NOTES
Throughout the programming of each key, be sure to keep
the remote pointed at the IR sensor of the device you are
currently programming the remote to control.
Test the remote with the device to make sure the
device key is programmed with the correct code for
๎>ร๎๎ร๎รvร๎Vร๎๎๎>๎๎รรยฐร๎vรร๎๎iรvi>รรรiรร`๎๎ยฝรรร๎ร๎]รรรรร
>ร`๎vviรi๎รรV๎`iยฐร-iiรร๎
iรยบ/iรร๎๎}รร๎
iร๎๎`iรv๎รร๎>ร๎๎ร๎ร
Functionalityโ section below for more information.
During the Auto Code Search, the remote ignores
๎iรยซรiรรiรรร๎
>รร>รi๎ยฝรรยซ>รรร๎vรร๎
iรรi>รV๎
ยฐร
/๎
iรรi>รV๎
รร๎๎iรร๎รรร>vรiรรรร๎ร๎๎๎รรiรร๎ญร๎
iร" U"๎๎ร๎iรร
blinks four times and turns off, and the last programmed
V๎`iรร๎`iรรร๎
>รร`iร๎Viร๎iรร๎รรรiร>๎๎i`ยฎยฐ
/๎
iร" U"๎๎ร๎iรรL๎๎๎๎รรv๎รรรร๎๎iรร>๎`รรรร๎รร๎vvรร๎
i๎รร๎
iร
รi๎๎รiร๎
>รร}๎๎iรร๎
ร๎ร}๎
ร>๎๎รร๎
iรV๎`iรยฐร/๎
iรรi๎๎รiรiร๎รรร
ร๎
iร๎รร๎ร๎๎`iร-i>รV๎
ยฐร๎vรร๎รรร`iร๎Viร๎
>ร๎ยฝรรรรร๎i`ร๎vvรรiร]ร
try a different search method.
Testing the Code for Maximum Functionality
1. Try a variety of the deviceโs functions with the remote. If
some device features donโt work, go to the next step to try
a different code.
2. ร ,iยซi>รรร๎
iร๎ร>๎`ร๎๎`iร-i>รV๎
รvร๎๎รร๎
iรLi}๎๎๎๎๎}ยฐร7๎
i๎ร
the device turns off for the ๏ฌrst time, donโt press the STOP
key, which would store the same code. Instead, with the
unit now off, continue to press the " U"๎๎ key repeatedly
until the unit turns back on.
3. Once the unit turns back on, you have found another code
that operates the device. Press the STOP key.
4. Test the keyโs functionality again by attempting to control
a variety of the deviceโs functions. If the code that has
been stored controls the majority of the deviceโs functions,
programming is complete. If the code stored does not give
maximum functionality, try another code.
Brand Code Search
The Brand Code Search goes through only the codes for one of
the select brands listed in the accompanying code list. If your
brand of device is listed, this search can be very quick and easy.
TIPS: Each device key is associated with a type of deviceโ
ร๎
iร/6ร๎รรยซรiรiรรร๎รรi>รV๎
รv๎รร/6ร]ร-๎/U๎๎๎U๎/๎รv๎รรร>รi๎๎๎รiร
รiVi๎รiรร]รV>L๎iรL๎รiรร๎รร`๎}๎ร>๎ร/6รV๎๎รiรรiรร]ร๎6๎รv๎รร
๎6๎รยซ๎>รiรร]ร>๎`ร6๎,U๎18รv๎รร6๎,รร๎รร๎6,รยฐร/๎รยซร๎}ร>๎ร
a device key for a different type of device, see the Changing
>ร๎iรยฝรร๎iร๎Viร/รยซi section.
/๎
iร" U"๎๎ร๎iรรรiรรiรร>รร>๎ร๎๎`๎V>ร๎รร๎๎}๎
รร`รร๎๎}ร
programming, giving you feedback at each stage of the
process.
/๎รiร๎รรร๎ร๎
๎รรรร>ร๎๎}ร>ร๎iรรV๎`iร>รร>๎รรยซ๎๎๎รร๎๎รร๎
iร๎ร>๎`ร
Code Search, press the ๎"ร๎๎๎๎ key.
1. Manually turn on the device you
want to control.
3.ร *รiรรร>๎`ร๎
๎๎`รร๎
iร`iร๎Viร๎iรรร๎รรร>๎รรร๎รยซร๎}ร>๎ยฐร7๎
๎๎iร
youโre holding down the device key, use your other hand
ร๎รยซรiรรร>๎`ร๎
๎๎`รร๎
iรรi๎๎รiยฝรร" U"๎๎ร๎iรร>รรร๎
iรร>๎iร
time.
4.ร 7>๎รรร๎ร๎๎รร๎
iร" U"๎๎ร๎iรรV๎๎iรร๎๎ร>๎`รรร>รรร๎๎ยฐร/๎
i๎ร
release both keys.
6. Point the remote directly at the
front panel of the device you want
ร๎รV๎๎รร๎๎ยฐร*รiรรร" U"๎๎ร๎๎รร๎
iร
remote and wait 2 seconds. The
remote is testing a single code for
your deviceโs brand.
Did your device turn off?
YES: Press the STOP key to store the code. Youโre done!
Youโve programmed this device key.
NO: *รiรรร" U"๎๎ร>}>๎๎ยฐร/๎
iรรi๎๎รiรรiรรรรร๎
iร๎iรรรV๎`iร
for your brand.
ร ๎iiยซรยซรiรร๎๎}ร" U"๎๎รiรiรรรรรรiV๎๎`รรร๎ร๎๎รร๎รรร`iร๎Viร
รรร๎รร๎vvยฐร7๎
i๎ร๎รร`๎iร]รยซรiรรร-/"*ยฐ
2.ร ๎๎๎`รร๎รรร`iร๎ViยฝรรLร>๎`ร๎๎รร๎
iร
Brand Code list section of the
accompanying code list. Circle
the number for your brand and
keep the list handy.
Code
Lists
Lista
de
Cรณdigos
0
1
2
3
4
5
6
7
8
9
TV
VC
R
0
1
2
3
4
5
6
7
8
9
DV
D
SA
T/CAB
LE
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
5. Look at the number you circled for
your deviceโs brand code number.
Press that number on the remote
keypad.
NOTES
Throughout the programming of each key, be sure to keep
the remote pointed at the IR sensor of the device you are
currently programming the remote to control.
Test the remote with the device to make sure the device
๎iรร๎รรยซร๎}ร>๎๎i`รร๎ร๎
รร๎
iรV๎รรiVรรV๎`iรv๎รร๎>ร๎๎ร๎ร
vร๎Vร๎๎๎>๎๎รรยฐร๎vรร๎๎iรvi>รรรiรร`๎๎ยฝรรร๎ร๎]รรรรร>ร`๎vviรi๎รร
V๎`iยฐร-iiรร๎
iรยบ/iรร๎๎}รร๎
iร๎๎`iรv๎รร๎>ร๎๎ร๎ร๎ร๎Vร๎๎๎>๎๎รรยปร
section below for more information.
๎รร๎๎}รร๎
iร๎ร>๎`ร๎๎`iร-i>รV๎
]รร๎
iรรi๎๎รiร๎}๎๎รiรร
๎iรยซรiรรiรรร๎
>รร>รi๎ยฝรรยซ>รรร๎vรร๎
iรรi>รV๎
ยฐร
/๎
iรรi>รV๎
รร๎๎iรร๎รรร>vรiรรรร๎ร๎๎๎รรiรร๎ญร๎
iร" U"๎๎ร๎iรร
blinks four times and turns off, and the last programmed
V๎`iรร๎`iรรร๎
>รร`iร๎Viร๎iรร๎รรรiร>๎๎i`ยฎยฐ
/๎
iร" U"๎๎ร๎iรรL๎๎๎๎รรv๎รรรร๎๎iรร>๎`รรรร๎รร๎vvรร๎
i๎รร๎
iร
รi๎๎รiร๎
>รร}๎๎iรร๎
ร๎ร}๎
ร>๎๎รร๎
iรV๎`iรยฐร/๎
iรรi๎๎รiรiร๎รรรร๎
iร
๎ร>๎`ร๎๎`iร-i>รV๎
ยฐร๎vรร๎รรร`iร๎Viร๎
>ร๎ยฝรรรรร๎i`ร๎vvรรiร]รรรรร>ร
different search method.
Direct Code Entry
Direct Code Entry lets you enter a code from the accompanying
code list for your brand of device. Itโs not as easy as the other
methods, but itโs potentially the fastest method.
1. Manually turn on the device you
want to control.
3. Press and hold the device key you want to program (the
" U"๎๎ร๎iรรV๎๎iรร๎๎ยฎยฐร
ร 7๎
๎๎iรร๎รยฝรiร๎
๎๎`๎๎}ร`๎ร๎รร๎
iร`iร๎Viร๎iร]รรรiรร๎รรร๎ร๎
iรร
hand enter the ๏ฌrst ๏ฌve-digit code for your brand in the
V๎`iร๎๎รรร๎ญร๎
iร" U"๎๎ร๎iรร}๎iรร๎vvร>vรiรรร๎
iรwรรรร`๎}๎รยฎยฐ
2.ร ๎๎๎`รร๎
iร๎๎`iร๎๎รรรร๎
>รรV>๎iรร๎ร๎
ร
the remote. Locate the section for
the type of device youโre trying to
program, and ๏ฌnd your brand in
that section. Circle the codes for
your brand and keep them handy.
Code
Lists
Lista
de
Cรณdigos
0
1
2
3
4
5
6
7
8
9
TV
VC
R
0
1
2
3
4
5
6
7
8
9
DV
D
SA
T/CAB
LE
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
NOTES
,i๎i๎Liรรร๎รi๎รiรรร๎
iรV๎`iรv๎รรvรรรรiรรiviรi๎Viร๎๎รร๎
iรL๎รร
provided in the Code Retrieval section of this manual.
๎vรร๎รรรLร>๎`ร๎ร๎ยฝรร๎๎รรi`ร๎๎รร๎
iรV๎`iร๎๎รร]รรรiร๎๎iร๎vรร๎
iร๎๎`iร
-i>รV๎
ร๎iร๎
๎`รรร๎รยซร๎}ร>๎รร๎
iรรi๎๎รiรV๎๎รร๎๎ยฐร๎ญ,iviรรร๎รร๎
iร
๎รร๎ร>๎`ร๎>๎ร>๎ร๎๎`iร-i>รV๎
ร๎iร๎
๎`รยฐยฎ
If you release the device key any time during the Direct Code
๎๎รรรรยซร๎Vi`รรi]รร๎
iร" U"๎๎ร๎iรรL๎๎๎๎รรv๎รรรร๎๎iร]ร>๎`ร
ร๎
iรยซร๎Viรรร๎รรiร๎รi`ยฐร/๎
iร๎>รรรยซร๎}ร>๎๎i`รV๎`iรร๎`iรรร๎
iร
device key is retained.
Test the remote with the device to make sure the device
๎iรร๎รรยซร๎}ร>๎๎i`รร๎ร๎
รร๎
iรV๎รรiVรรV๎`iรv๎รร๎>ร๎๎ร๎ร
vร๎Vร๎๎๎>๎๎รรยฐร๎vรร๎๎iรvi>รรรiรร`๎๎ยฝรรร๎ร๎]รรรรร>ร`๎vviรi๎รรV๎`iร
in the list.
4.ร 7๎
i๎รร๎รยฝรiรw๎๎ร๎
i`รi๎รiร๎๎}รร๎
iรwรi๎`๎}๎รรV๎`i]ร๎iiยซร
๎
๎๎`๎๎}ร`๎ร๎รร๎
iร`iร๎Viร๎iรร>๎`ร๎๎๎๎ร>รรร๎
iร" U"๎๎ร๎iรยฐร
ร ๎รรร๎
iร" U"๎๎ร๎iรร๎๎ยถร
YES: Youโre done! Youโve programmed this device key.
ร "]ร๎รรL๎๎๎๎i`รv๎รรรร๎๎iรร>๎`รรรร๎i`ร๎vv\รYou have
either entered a code number that is not in the code lists or
missed a step in the code entry procedure. Try step 3 again.
Manual Code Search
The Manual Code Search lets you go one-by-one through all
ร๎
iรV๎`iรรv๎รรร๎
iร`iร๎Viรร๎รยฝรiรรรร๎๎}รร๎รV๎๎รร๎๎ยฐร7๎
i๎รร๎รรw๎`ร
the one that operates your device, you can stop the search and
store that code.
TIPS:ร/๎
iร" U"๎๎ร๎iรรรiรรiรร>รร>๎ร๎๎`๎V>ร๎รร๎๎}๎
รร`รร๎๎}ร
programming, giving you feedback at each stage of the process.
Each device key is associated with a type of deviceโthe TV is
ยซรiรiรรร๎รรi>รV๎
รv๎รร/6ร]ร-๎/U๎๎๎U๎/๎รv๎รรร>รi๎๎๎รiรรiVi๎รiรร]ร
V>L๎iรL๎รiรร๎รร`๎}๎ร>๎ร/6รV๎๎รiรรiรร]ร๎6๎รv๎รร๎6๎รยซ๎>รiรร]ร
>๎`ร6๎,U๎18รv๎รร6๎,รร๎รร๎6,รยฐร/๎รยซร๎}ร>๎ร>ร`iร๎Viร๎iรรv๎รร
a different type of device, see the ๎๎
>๎}๎๎}ร>ร๎iรยฝรร๎iร๎Viร
Type section.
The Manual Code Search method may take a long time
because the remote searches through all of the codes in
๎รรร๎i๎๎รรร๎๎i๎Lร๎๎๎iยฐร๎vรร๎รรรLร>๎`ร๎รร๎๎รรi`ร๎๎รร๎
iร๎ร>๎`ร
๎๎`iรร๎รรร๎
iร๎๎`iร๎๎รรร]รwรรรรรรรรร๎
iร๎ร>๎`ร๎๎`iร-i>รV๎
ร๎รร
the Direct Code Entry method.
/๎รiร๎รรร๎ร๎
๎รรรร>ร๎๎}ร>ร๎iรรV๎`iร>รร>๎รรยซ๎๎๎รร๎๎รร๎
iร๎>๎ร>๎ร
๎๎`iร-i>รV๎
]รยซรiรรรร๎
iร๎"ร๎๎๎๎ร๎iรยฐ
1. Manually turn on the device you
want to control.
3.ร 7>๎รรร๎ร๎๎รร๎
iร" U"๎๎ร๎iรรV๎๎iรร๎๎ร>๎`รรร>รรร๎๎ยฐร/๎
i๎ร
release both keys.
4. Point the remote directly at the front panel of the device you
ร>๎รรร๎รV๎๎รร๎๎ยฐร*รiรรร" U"๎๎ร๎๎รร๎
iรรi๎๎รiร>๎`รร>๎รรรร
seconds. The remote is testing a single code for your device.
Did your device turn off?
YES: Press the STOP key to store
the code. Youโre done! Youโve
programmed this device key.
NO: *รiรรร" U"๎๎ร>}>๎๎ยฐร/๎
iร
remote tests the next code for
your device.
ร ๎iiยซรยซรiรร๎๎}ร" U"๎๎รiรiรรรรร
seconds until your device turns off.
7๎
i๎ร๎รร`๎iร]รยซรiรรร-/"*ยฐ
TIP: Because there are so many codes, you may have to press
ร๎
iร" U"๎๎ร๎iรร๎>๎รรร๎๎iรpยซ๎รร๎L๎รร๎
ร๎`รi`รร๎vรร๎๎iรยฐ
NOTES
Throughout the programming of each key, keep the remote
pointed at the IR sensor of the device you are programming
the remote to control.
Test the remote with the device to make sure the device
๎iรร๎รรยซร๎}ร>๎๎i`รร๎ร๎
รร๎
iรV๎รรiVรรV๎`iรv๎รร๎>ร๎๎ร๎ร
vร๎Vร๎๎๎>๎๎รรยฐร๎vรร๎๎iรvi>รรรiรร`๎๎ยฝรรร๎ร๎]รรรรร>ร`๎vviรi๎รร
V๎`iยฐร-iiรร๎
iรยบ/iรร๎๎}รร๎
iร๎๎`iรv๎รร๎>ร๎๎ร๎ร๎ร๎Vร๎๎๎>๎๎รรยปร
section below for more information.
During the Manual Code Search, the remote ignores
๎iรยซรiรรiรรร๎
>รร>รi๎ยฝรรยซ>รรร๎vรร๎
iรรi>รV๎
ยฐร
/๎
iรรi>รV๎
รร๎๎iรร๎รรร>vรiรรรร๎ร๎๎๎รรiรร๎ญร๎
iร" U"๎๎ร๎iร
blinks four times and turns off, and the last programmed
V๎`iรร๎`iรรร๎
>รร`iร๎Viร๎iรร๎รรรiร>๎๎i`ยฎยฐ
The " U"๎๎ร๎iร blinks four times and turns off when the
รi๎๎รiร๎
>รร}๎๎iรร๎
ร๎ร}๎
ร>๎๎รร๎
iรV๎`iรยฐร/๎
iรรi๎๎รiรiร๎รรรร๎
iร
๎>๎ร>๎ร๎๎`iร-i>รV๎
ยฐร๎vรร๎รรร`iร๎Viร๎
>ร๎ยฝรรรรร๎i`ร๎vvรรiร]รรรรร
a different search method.
Testing the Code for Maximum Functionality
1. Try a variety of the deviceโs functions with the remote. If
some features of your devices donโt work, go to the next
step to try a different code.
2. ร ,iยซi>รรร๎
iร๎>๎ร>๎ร๎๎`iร-i>รV๎
รvร๎๎รร๎
iรLi}๎๎๎๎๎}ยฐร7๎
i๎ร
the device turns off for the ๏ฌrst time, donโt press the STOP
key, which would store the same code. Instead, with the
unit now off, continue to press the " U"๎๎รkey repeatedly
until the unit turns back on.
3. Once the unit turns back on, you have found another code
that operates the device. Press the STOP key.
4. Test the keyโs functionality again by trying a variety of
functions. If the code controls the majority of the deviceโs
functions, programming is complete. If the code stored
does not give maximum functionality, try another code.
Code Retrieval
Once youโve programmed the remote to control your devices,
you may want to record the codes for future reference. If
you used the Direct Code Entry method, this is easy. Just
๏ฌnd the codes you entered and make a note of them in the
boxes below. If you used one of the Code Search methods to
program your remote or if you used the Direct Entry method
but donโt remember the code, you will need to retrieve each
deviceโs ๏ฌve-digit code. Retrieving the actual code and writing
it down will save you time if you ever need to program the
remote again (e.g., if programming is lost when you change
the batteries). If the codes are recorded, you can use the
Direct Entry method to reprogram your remote to control your
devices, which is quick and easy.
1. Press and hold the device
๎iรร๎ญ/6]ร-๎/U๎๎๎U๎/๎]ร๎6๎]ร
6๎,U๎18ยฎรร๎
๎รiรV๎`iรร๎รร
ร๎ร๎
รร๎รรiรร๎iรiยฐร/๎
iร" U"๎๎ร
๎iรรรรร๎รร๎๎ยฐร๎iiยซรยซรiรร๎๎}รร๎
iร
device key.
IMPORTANT
๎iV>รรiรร๎
๎รรรi๎๎รiรV๎๎รร๎๎รร๎๎รiรร๎
>๎ร๎๎iร`iร๎Vi]รร๎รร
๎รรรรwรรรรยบรi๎๎ยปรร๎
iรรi๎๎รiรร๎
๎V๎
ร`iร๎Viรร๎รรร๎ร๎
รร๎ร
operate. That means, if you wish to operate your TV, you
๎รรรรwรรรรยซรiรรรร๎
iร/6ร๎iรรร๎รยซรรรร๎
iรรi๎๎รiร๎๎รร๎
iร/6ร
Mode. The remote stays in that device mode until you press
>ร`๎vviรi๎รร`iร๎Viร๎iรยฐร๎๎รรiร>๎ยซ๎i]ร๎vรร๎รรรรi๎๎รiร๎รร๎๎ร/6ร
Mode and you want to operate the DVD player, you must
press the DVD key to change device modes.
Accessing Device Menus and Guides
Many devices use on-screen menus and guides to help you
๎>ร๎}>รiรร๎
ร๎ร}๎
ร>๎๎รร๎
i๎รรvi>รรรiรร>๎`รยซร๎}ร>๎๎๎๎}ยฐร7๎
๎๎iร
this remote may not access every menu or guide system
of every device model, it does offer some menu and guide
functionality.
To use a deviceโs on-screen menu or guide system, you ๏ฌrst
have to put the remote in Menu or Guide Mode.
1. Make sure your devices are turned on and your TV is set
ร๎รร๎
iรV๎รรiVรร`iร๎Viร๎๎ยซรรร๎ญรรiรร๎
iร๎ *1/ร๎iรรร๎รร๎}}๎iร
through inputs when in TV Mode.)
2. Press the device key whose menu you want to access.
{ยฐรร 1รiรร๎
iร6"๎ยณร๎ร>๎`ร๎๎ยณร๎ร๎iรรรร๎ร
navigate through the on-screen
menu system or guide. To select the
๎
๎}๎
๎๎}๎
รi`ร๎รi๎]รยซรiรรรร๎
iร"๎ร๎iรยฐ
TIP:ร๎vรร๎
iรรi๎๎รiร`๎iร๎ยฝรรรiรยซ๎๎`]ร
V๎
iV๎รร๎รรiiรร๎
>รรร๎
iร" U"๎๎ร๎iรร๎รร
รร๎๎๎รL๎๎๎๎๎๎}ยฐร/๎
iร" U"๎๎ร๎iรรร๎๎iรร
out after 20 seconds. If this happens,
๎รรรรยซรiรรรร๎
iร๎๎ 1ร๎iรร>}>๎๎]ร>๎`ร
then retry your selection.
Exiting Menu/Guide Mode
The remote automatically times out of Menu or Guide Mode
after 20 seconds of inactivity (no keys being pressed). At that
time, the remote clears the displayed menu from the TV.
If you want to exit the Menu Mode yourself, press the
V๎รรiรยซ๎๎`๎๎}ร`iร๎Viร๎iรร๎๎รร๎
iรรi๎๎รiร๎ญ/6]ร-๎/U๎๎๎U๎/๎]ร
๎6๎]ร6๎,U๎18ยฎยฐร/๎
iร" U"๎๎ร๎iรรรรร๎รร๎vvยฐ
Problem: The remote does not operate your device.
Uรร ๎>๎iรรรรiรร๎
iรรi๎๎รiร๎รร๎๎รร๎
iรV๎รรiVรร๎๎`iรLรรยซรiรร๎๎}รร๎
iร
V๎รรiรยซ๎๎`๎๎}ร`iร๎Viร๎iรร๎ญ/6]ร-๎/U๎๎๎U๎/๎]ร๎6๎]ร6๎,U๎18ยฎยฐร
This tells the remote which device to operate.
Uรร ,i๎๎รiร>๎รร๎Lรร>V๎iรรLiรรii๎รร๎
iรรi๎๎รiร>๎`รร๎
iร`iร๎Viยฐร๎>๎iร
sure youโre aiming the remote at the deviceโs IR sensor.
Uรร ๎>๎iรรรรiรร๎
iรL>รรiร๎iรร>รiรvรiร๎
ร>๎`ร>รiรยซร๎ยซiร๎รร๎๎รร>๎๎i`ยฐร
Replace the batteries with two new AA batteries, if necessary
(see the Battery Installation section).
Problem: The remote canโt be programmed to operate your
device.
Uรร ๎vรร๎รร>รiรรiรร๎๎}รร๎
iรรi๎๎รiรร๎
๎๎iรยซร๎}ร>๎๎๎๎}ร๎ร]รร๎รร๎>รรLiร
too far away from the device or at a wrong angle. There must be
an unobstructed path between the remote and the IR sensor on
the device. Move closer and make sure you point the remote at
the device youโre trying to control.
Uรร ๎vรร๎รยฝรiรรร๎๎}รร๎
iร๎๎รiVรร๎๎รรรรยซร๎}ร>๎๎๎๎}ร๎iร๎
๎`รร๎รi๎รiรร
the codes for your brand and the unit is still not functioning
properly, try the auto, brand, or manual search method.
Uรร /๎รV๎๎รร๎๎รV๎๎L๎รร๎๎รร]ร๎๎๎iร/6ร6๎,รร๎รร/6ร๎6๎ร]รร๎รร๎รรรร
program the individual corresponding device keys to control
each part of the combo unit. Once programmed successfully, the
/6ร๎iรรV๎๎รร๎๎รรร๎
iร/6รvร๎Vร๎๎๎ร]ร>๎`รร๎
iร6๎,U๎18ร๎รร๎6๎ร๎iรร
controls the VCR or DVD functions.
Uรร ๎>๎iรรรรiรร๎
iรL>รรiร๎iรร>รiรvรiร๎
ร>๎`ร>รiรยซร๎ยซiร๎รร๎๎รร>๎๎i`ยฐ
Problem: The remote doesnโt perform commands properly.
Uรร ๎>๎iรรรรiรร๎
iรรi๎๎รiร๎รร๎๎รร๎
iรV๎รรiVรร๎๎`iรLรรยซรiรร๎๎}รร๎
iร
V๎รรiรยซ๎๎`๎๎}ร`iร๎Viร๎iรร๎ญ/6]ร-๎/U๎๎๎U๎/๎]ร๎6๎]ร6๎,U๎18ยฎยฐร
This tells the remote which device to operate.
Uรร ๎>๎iรรรรiร`iร๎Viร๎รรรi>`รร๎ญv๎รรiร>๎ยซ๎i]รร๎
iร๎6๎รยซ๎>รiรร๎
>รร>ร
disc loaded).
Uรร 9๎รร๎>รร๎
> ร iรยซรiรรi` ร >๎ร๎๎ร>๎๎ ` ร๎iรรv๎รร ร ๎
iร๎๎`iรร ๎
iรรi๎๎รiร ๎ รร๎๎ยฐ
Uรร ๎vรร๎รยฝรiรรรร๎๎}รร๎รi๎รiรร>รV๎
>๎๎i๎ร๎ร๎Liรร`๎รiVร๎ร]รรรรรยซรiรร๎๎}ร
ร๎
iร"๎ร๎iรร>vรiรรi๎รiร๎๎}รร๎
iรV๎
>๎๎i๎ร๎ร๎Liรร>รรร๎
๎รร๎รร>ร
requirement of certain models and brands.
Uรร /๎
iรiร๎รร>รยซ๎รร๎L๎๎๎รรรร๎
>รร>รยซร๎}ร>๎๎i`รV๎`iร๎>รร๎๎๎รรLiร
able to control some of your device features (for example, only
turns a device on and off). To con๏ฌrm that the device key is
programmed with the correct code for maximum functionality,
test the device. Attempt to control a variety of the deviceโs
functions with the remote. If some of the features of your
devices donโt work, try programming the remote with a different
code in the list using the Direct Code Entry Method, until you
๏ฌnd the code that allows the remote to control the majority of
your deviceโs functions. Different codes can provide different
levels of functionality.
*ร๎L๎i๎\ร/๎
iร" U"๎๎ร๎iรร`๎iรร๎๎รร๎๎}๎
รรร๎
i๎รร๎รรยซรiรรร>ร๎iรยฐ
Uรร 9๎รร๎>รร๎
>รiรยซรiรรi`ร>๎ร๎๎ร>๎๎`ร๎iรรv๎รรร๎
iร๎๎`iรร๎
iรรi๎๎รiร๎รร
in.
Uร ๎>๎iรรรรiรร๎
iรรi๎๎รiร๎รร๎๎รร๎
iรV๎รรiVรร๎๎`iรLรรยซรiรร๎๎}รร๎
iร
V๎รรiรยซ๎๎`๎๎}ร`iร๎Viร๎iรร๎ญ/6]ร-๎/U๎๎๎U๎/๎]ร๎6๎]ร6๎,U๎18ยฎยฐร
This tells the remote which device to operate.
Uรร ๎>๎iรรรรiรร๎
iรL>รรiร๎iรร>รiรvรiร๎
ร>๎`ร>รiรยซร๎ยซiร๎รร๎๎รร>๎๎i`ยฐร
Replace the batteries with two new AA batteries, if necessary
(see the Battery Installation section).
*ร๎L๎i๎\ร/๎
iรรi๎๎รiรร๎๎๎ร๎๎รรV๎
>๎}iรV๎
>๎๎i๎รร๎๎ร`iร๎Viยฐ
Uร ๎>๎iรรรรiรร๎
iรรi๎๎รiร๎รร๎๎รร๎
iรV๎รรiVรร๎๎`iรLรรยซรiรร๎๎}รร๎
iร
V๎รรiรยซ๎๎`๎๎}ร`iร๎Viร๎iรร๎ญ/6]ร-๎/U๎๎๎U๎/๎]ร๎6๎]ร6๎,U๎18ยฎยฐร
This tells the remote which device to operate.
Uรร *รiรรรร๎
iร"๎ร๎iรร>vรiรรร๎รรi๎รiรร>รV๎
>๎๎i๎ร๎ร๎Liรยฐ
Uรร ,i๎๎รiร>๎รร๎Lรร>V๎iรรLiรรii๎รร๎
iรรi๎๎รiร>๎`รร๎
iร`iร๎Viยฐร๎>๎iร
sure to aim the remote at the IR sensor on the device.
Problem: The deviceโs menu does not appear on the TV screen.
Uรร ๎>๎iรรรรiรร๎รร๎
>รiรV๎๎๎iVรi`รร๎
iร`iร๎Viรร๎รร๎รรร/6รยซร๎ยซiร๎รร>๎`ร
selected the correct input. (See your devicesโ Ownerโs Manuals for
proper connection procedures.)
Uร ๎>๎iรรรรiรร๎
iรรi๎๎รiร๎รร๎๎รร๎
iรV๎รรiVรร๎๎`iรLรรยซรiรร๎๎}รร๎
iร
V๎รรiรยซ๎๎`๎๎}ร`iร๎Viร๎iรร๎ญ/6]ร-๎/U๎๎๎U๎/๎]ร๎6๎]ร6๎,U๎18ยฎยฐร
This tells the remote which device to operate.
Uรร ๎i๎รร>VViรรร๎ร๎ยฝรรรรยซยซ๎รรi`รv๎รร>๎๎รLร>๎`รยฐร9๎รร๎>รร๎ii`รร๎รรรiร
your original remote control to access menu functions for some
devices.
๎๎รร๎๎รiร๎๎v๎ร๎>ร๎๎๎]รยซ๎i>รiรร๎ร๎รรรรรยฐรV>>VViรร๎ร๎iรยฐV๎๎
Consumer Help Line: 1-800-420-7968
Audiovox Electronics Corporation (the โCompanyโ) warrants to you the
original retail purchaser of this product that should it, under normal use
and conditions, be proven defective in material or workmanship during
its lifetime while you own it, such defect(s) will be repaired or replaced
(at the Companyโs option) without charge for parts and repair labor. To
๎Lร>๎๎รรiยซ>๎รร๎รรรiยซ๎>Vi๎i๎รรร๎ร๎
๎๎รร๎
iรรiร๎รร๎vรร๎
๎รร7>รร>๎รร]รร๎
iรยซร๎`รVรร
is to be delivered with proof of warranty coverage (e.g. dated bill of sale),
speci๏ฌcation of defect(s), transportation prepaid, to the Company at the
address shown below.
/๎
๎รร7>รร>๎รรร`๎iรร๎๎รรV๎รiรรยซร๎`รVรรยซรรV๎
>รi`]รรiรร๎Vi`ร๎รรรรi`ร๎รรร๎`iร
ร๎
iร1๎๎รi`ร-ร>รiรร๎รร๎>๎>`>ยฐร/๎
๎รร7>รร>๎รรร๎รร๎๎รรรร>๎รviร>L๎iร>๎`ร`๎iรร
not extend to costs incurred for installation, removal or reinstallation of
ร๎
iรยซร๎`รVรยฐร/๎
๎รร7>รร>๎รรร`๎iรร๎๎รร>ยซยซ๎รร๎vร๎๎รร๎
iร๎๎๎ยซ>๎รยฝรร๎ยซ๎๎๎๎๎]ร
the product has been damaged through alteration, improper installation,
mishandling, misuse, neglect, accident, or the simultaneous use of different
battery types (e.g. alkaline, standard or rechargeable).
/๎๎ร๎8/๎ /ร"๎ร/๎๎ร๎"๎*๎ 9ยฝ-ร๎๎๎๎๎๎๎/9ร1 ๎๎,ร/๎๎-ร7๎,,๎ /9ร๎-ร
LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO
๎6๎ /]ร-๎๎๎๎ร/๎๎ร๎"๎*๎ 9ยฝ-ร๎๎๎๎๎๎๎/9ร๎8๎๎๎๎ร/๎๎ร*1,๎๎๎-๎ร*,๎๎๎ร
*๎๎๎ร๎9ร*1,๎๎๎-๎,ร๎",ร/๎๎ร*,"๎1๎/ยฐ
/๎
๎รร7>รร>๎รรร๎รร๎๎ร๎๎iรร๎vร>๎๎ร๎ร๎
iรรiรยซรiรรรร>รร>๎ร๎iรร๎รร๎๎>L๎๎๎ร๎iรยฐร๎ 9ร
๎๎*๎๎๎๎ร7๎,,๎ /๎๎-]ร๎ ๎๎1๎๎ ๎ร๎ 9ร๎๎*๎๎๎๎ร7๎,,๎ /9ร"๎ร
๎๎,๎๎๎ /๎๎๎๎๎/9ร",ร๎๎/ ๎--ร๎",ร๎ร*๎,/๎๎1๎๎,ร*1,*"-๎ร-๎๎๎๎ร
๎๎ร๎๎๎๎/๎๎ร/"ร๎1,๎/๎" ร"๎ร/๎๎-ร7๎,,๎ /9ยฐร๎ ร "ร๎๎-๎ร-๎๎๎๎ร
/๎๎ร๎"๎*๎ 9ร๎๎ร๎๎๎๎๎๎ร๎",ร๎ 9ร๎" -๎+1๎ /๎๎๎ร",ร๎ ๎๎๎๎ /๎๎ร
๎๎๎๎๎๎-ร7๎๎/-"๎6๎,ยฐร ๎รยซiรร๎๎ร๎รรรiยซรiรi๎ร>ร๎รiร๎รร>รร๎
๎ร๎รขi`ร
to assume for the Company any liability other than expressed herein in
connection with the sale of this product.
Some states/provinces do not allow limitations on how long an implied
warranty lasts or the exclusion or limitation of incidental or consequential
damage so the above limitations or exclusions may not apply to you. This
7>รร>๎รรร}๎รiรรร๎รรรยซiV๎wVร๎i}>๎รร๎}๎
รรร>๎`รร๎รร๎>รร>๎ร๎ร๎
>รiร๎ร๎
iรรร๎}๎
รร]ร
which vary from state/province to state/province.
U.S.A.: Audiovox Electronics Corporation, 150 Marcus Blvd., Hauppauge,
New York 11788
CANADA: ๎ร`๎๎ร๎รร,iรรร๎ร๎i๎รiร]รVร๎ร๎i๎V๎]รรรnxร๎i๎๎i`รร,๎>`]ร
1๎๎รรร]ร๎๎๎รรยฃร]ร๎๎รร๎รร>ร}>]ร"๎ร>ร๎๎รร๎x/รร๎x
Trademark(s) ยฎ Registered
,๎,{ยฃรร1-รรคx
ยฉ2010 Audiovox Accessories Corporation
111 Congressional Blvd., Suite 350
Carmel, IN 46032
Step 1: Install your batteries
Step 2: Program your remote
Tour of the Remote
Advanced Functions
Troubleshooting
Limited Lifetime Warranty
3
DVD CODE
5
SATโขCBLโขDTC CODE
1
TV CODE
SAT CABLE DTV CONVERTER
รยฐรร /๎ร>VViรรร๎i๎รร]รยซรiรรรร๎
iร๎๎ 1ร๎iรยฐร/๎ร>VViรรร}ร๎`iร]ร
ยซรiรรรร๎
iร๎1๎๎๎ร๎iรยฐร/๎
iร" U"๎๎ร๎iรรรร>รรรรL๎๎๎๎๎๎}]ร
indicating you are in Menu or Guide Mode.
" U"๎๎ร๎iร
2.ร *รiรรร>๎`ร๎
๎๎`รร๎
iร`iร๎Viร๎iรรร๎รรร>๎รรร๎รยซร๎}ร>๎ยฐร7๎
๎๎iร
youโre holding down the device key, use your other hand
ร๎รยซรiรรร>๎`ร๎
๎๎`รร๎
iรรi๎๎รiยฝรร" U"๎๎ร๎iรร>รรร๎
iรร>๎iร
time.
Note: All TV codes begin with the number 1; all VCR and DVR
codes begin with the number 2; all DVDs, the number 3; and
>๎๎รร>รi๎๎๎รiรรiVi๎รiรร]รV>L๎iรL๎รiรร>๎`ร`๎}๎ร>๎ร/6รV๎๎รiรรiรร]ร
the number 5.
5. Repeat step 4 until you have retrieved all ๏ฌve numbers in
ร๎
iรV๎`iยฐร๎vรiรรร๎
iรwvร๎
ร๎ร๎Liรร๎รรรiรร๎iรi`]รร๎
iร" U"๎๎ร
key blinks brie๏ฌy, then turns off.
TIP:ร/๎รiร๎รรร๎
iร๎๎`iร,iรร๎iร>๎ร๎๎`iร>รร>๎รรร๎๎i]รยซรiรรรร๎
iร
๎"ร๎๎๎๎ร๎iรยฐ
Note: If you press an invalid key during the Code Retrieval
process, the remote will not respond. If you do not press a
ร>๎๎`ร๎๎`iร,iรร๎iร>๎ร๎iรร๎ญ/6]ร-๎/U๎๎๎U๎/๎]ร๎6๎]ร6๎,U๎18]ร
๎ ๎"]ร๎"ร๎๎๎๎ยฎ]ร๎๎`iร,iรร๎iร>๎รร๎๎iรร๎รรร>vรiรรยฃxรรiV๎๎`รยฐร
/๎
iร" U"๎๎ร๎iรรL๎๎๎๎รรv๎รรรร๎๎iร]ร>๎`รร๎
i๎รรรร๎รร๎vvยฐ
๎"ร๎๎๎๎ exits remote programming; it also performs the
same functions as on your original remotes.
Theร๎ *1/ and pร๎ญ`>ร๎
ยฎรkey has three functions: (1) it toggles
through all the video sources connected to your TV; (2) when
the remote is in VCR mode, this button toggles between VCR
and the TV input; (3) when youโre entering digital channel
numbers directly, this button lets you separate the main
channel number from the sub-channel number (such as 59.1).
๎>V๎๎๎}๎
ร๎๎}
Backlight illumination helps you see the remote control keys
better in the dark. You can turn backlight illumination on or off
by pressing the backlight key ( ). Backlighting stays on as
long as keys are being pressed and turns off six seconds after
the last keypress. Once the backlight time has timed out, any
keypress will reactivate it. If the backlight illumination is on,
and you press the backlight key, the backlight turns off.
รยฐรร 7๎
๎๎iร๎
๎๎`๎๎}รร๎
iร`iร๎Viร๎iรร`๎ร๎]รยซรiรรร>๎`ร๎
๎๎`รร๎
iร
๎ ๎"ร๎iรยฐร/๎
iร" U"๎๎ร๎iรรรรร๎รร๎vvยฐร๎vรiรร๎
๎๎`๎๎}ร`๎ร๎ร
L๎ร๎
ร๎iรรรv๎รรร๎
รiiรรiV๎๎`ร]รร๎
iร" U"๎๎ร๎iรรรรร๎รรL>V๎ร
on.
รยฐรร ,i๎i>รiรL๎ร๎
ร๎iรรยฐร/๎
iร" U"๎๎ร๎iรรรi๎>๎๎รร๎๎ยฐ
4. Starting with the number 1 key, press and release each
number key on the keypad in the following order: 1-9, then
รคยฐร/๎
iร๎ร๎Liรรร๎
>รรV>รรiรรร๎
iร" U"๎๎ร๎iรรร๎รL๎๎๎๎ร๎รรร๎
iร
๏ฌrst number of the code. As you ๏ฌnd each number of the
code, write it down for future reference.
TIP: Each device key is associated with a type of deviceโthe
/6ร๎รรยซรiรiรรร๎รรi>รV๎
รv๎รร/6ร]ร-๎/U๎๎๎U๎/๎รv๎รรร>รi๎๎๎รiร
รiVi๎รiรร]รV>L๎iรL๎รiรร๎รร`๎}๎ร>๎ร/6รV๎๎รiรรiรร]ร๎6๎รv๎รร๎6๎ร
ยซ๎>รiรร]ร>๎`ร6๎,U๎18รv๎รร6๎,รร>๎`ร๎6,รยฐร/๎รยซร๎}ร>๎ร>ร
device key for a different type of device, see the Changing a
๎iรยฝรร๎iร๎Viร/รยซi section.
/๎
iร" U"๎๎ร๎iรรรiรรiรร>รร>๎ร๎๎`๎V>ร๎รร๎๎}๎
รร`รร๎๎}ร
programming, giving you feedback at each stage of the
process.
Actual model may vary
from illustration
TIPS: Each device key is associated with a type of deviceโ
ร๎
iร/6ร๎รรยซรiรiรรร๎รรi>รV๎
รv๎รร/6ร]ร-๎/U๎๎๎U๎/๎รv๎รรร>รi๎๎๎รiร
รiVi๎รiรร]รV>L๎iรL๎รiรร๎รร`๎}๎ร>๎ร/6รV๎๎รiรรiรร]ร๎6๎รv๎รร
๎6๎รยซ๎>รiรร]ร>๎`ร6๎,U๎18รv๎รร6๎,รร๎รร๎6,รยฐร/๎รยซร๎}ร>๎ร
a device key for a different type of device, see the Changing
>ร๎iรยฝรร๎iร๎Viร/รยซi section.
/๎รiร๎รรร๎ร๎
๎รรรร>ร๎๎}ร>ร๎iรรV๎`iร>รร>๎รรยซ๎๎๎รร๎๎รร๎
iร๎รร๎ร
Code Search, press the ๎"ร๎๎๎๎ key.
Changing A Keyโs Device Type
Each device key is associated with a type of deviceโthe TV is
ยซรiรiรรร๎รรi>รV๎
รv๎รร/6ร]ร-๎/U๎๎๎U๎/๎รv๎รรร>รi๎๎๎รiรรiVi๎รiรร]ร
cable boxes or digital TV converters, DVD for DVD players, and
6๎,U๎18รv๎รร6๎,รร๎รร๎6,รยฐร/๎รยซร๎}ร>๎รร๎
iรiร๎iรรรร๎รV๎๎รร๎๎ร
a different kind of device, you have to reassign them ๏ฌrst.
,i>รร๎}๎๎๎}รร๎
iร6๎,U๎18ร๎iรร/๎ร๎๎๎รร๎๎ร"ร๎
iรร
Devices
/๎
iร6๎,U๎18ร๎iรร`iv>ร๎รรรร๎รV๎๎รร๎๎ร>ร6๎,ร๎รร๎6,ยฐร๎vรร๎รรร>๎รร
ร๎
iร6๎,U๎18ร๎iรรร๎รV๎๎รร๎๎ร>ร`๎vviรi๎รร`iร๎Viร๎ญ>๎ร>``๎ร๎๎๎>๎ร
TV, DVD, satellite, cable box or digital TV converter, for
example), you must reassign it.
ยฃยฐรร *รiรรร>๎`ร๎
๎๎`รร๎
iร6๎,U๎18ร๎iรยฐร/๎
iร" U"๎๎ร๎iรรรรร๎รร๎๎ยฐ
รยฐรร 7๎
๎๎iร๎
๎๎`๎๎}ร`๎ร๎รร๎
iร6๎,U๎18ร๎iร]รยซรiรรร>๎`รรi๎i>รiรร๎
iร
number key on the keypad for the device you wish to control
๎ญรiiรร๎
iรV๎
>รรรLi๎๎รยฎยฐร/๎
iร" U"๎๎ร๎iรรรรร๎รร๎vvยฐ
รยฐรร ,i๎i>รiรร๎
iร6๎,U๎18ร๎iรยฐร/๎
iร" U"๎๎ร๎iรรL๎๎๎๎รรv๎รรร
ร๎๎iรร>๎`รร๎
i๎รรรร๎รร๎vvยฐร/๎
iร6๎,U๎18ร๎iรร๎รร๎๎รรรiรรร๎ร
control the device type you selected.
{ยฐรร ๎๎๎๎๎รรร๎
iร`๎รiVร๎๎๎รร๎๎รร๎
iร>รร๎]รLร>๎`]ร`๎รiVรรi๎รรร]ร๎รร
๎>๎ร>๎รV๎`iรรi>รV๎
รร๎รยซร๎}ร>๎รร๎
iร6๎,U๎18ร๎iรยฐร
6๎,U๎18ร๎๎9ร๎" /,"๎-\
Additional TV press 1
VCR or DVR press 2
Additional DVD press 3
Additional satellite, cable box or
digital TV converter
press 5
VCRโขAUX CODE
DVR/VCR DVD TV -๎/U๎๎๎U๎/๎
In most cases, the keys on
this remote perform the same
functions as the keys on your
original remotes once youโve
programmed this remote to
operate your components.
Many keys on this remote
have other functions as well.
Illuminated " U"๎๎ key
serves as an indicator light to
provide feedback.
Device keys (TV,
-๎/U๎๎๎U๎/๎, ๎6๎,
6๎,U๎18) put the remote in
the right mode to control your
device.
Backlight key (
) turns
backlighting on/off.
๎1๎๎๎ and ๎๎ 1 put the
remote in menu/guide mode,
which makes the ๎๎ร6"๎ร
keys serve as arrow keys;
they also access the same
features as the keys on your
original remotes.
๎๎ and 6"๎ keys have dual
functions: they can act as
navigation keys in menu
systems as well as channel
and volume controllers
outside the menus. The
CH keys also provide skip
forward and skip back control
for DVD players and DVRs
that support this functionality.
Battery Saver
Your universal remote control saves battery power by
automatically turning off if any key is pressed for more than
60 seconds. This saves your battery life should your remote
get stuck in a place where the keys remain depressed, such as
between sofa cushions.
Universal Remote Control
Ownerโs Manual
RCR412BR / RCR412SR / RCR412SIR
Manual del Propietario (parte posterior)
Care and Maintenance
Uรร๎iiยซรร๎
iรรi๎๎รiร`รรยฐร๎vร๎รร}iรรรรiร]รร๎ยซiร๎รร`รรร๎๎๎i`๎>รi๎รยฐ
Uรร1รiร>๎`รรร๎รiรร๎
iรรi๎๎รiร๎๎๎รร๎๎ร๎๎ร๎>๎รรi๎ยซiร>รรรiร
environments.
Uรร๎>๎`๎iรร๎
iรรi๎๎รiร}i๎ร๎รร>๎`รV>รivร๎๎รยฐร๎๎๎ยฝรร`ร๎ยซร๎รยฐ
Uรร๎iiยซรร๎
iรรi๎๎รiร>ร>รรvร๎๎ร`รรรร>๎`ร`๎รรยฐ
Uรร7๎ยซiรร๎
iรรi๎๎รiรร๎ร๎
ร>ร`>๎ยซรV๎๎ร๎
ร๎VV>ร๎๎๎>๎๎รรร๎ร๎iiยซร๎รร
looking new.
Uรร๎๎`๎vร๎๎}ร๎รรร>๎ยซiร๎๎}รร๎ร๎
รร๎
iรรi๎๎รiยฝรร๎๎รiร๎>๎ร`iร๎ViรรV>๎ร
cause malfunction and invalidate its warranty.
SAVE THIS MANUAL AND THE CODE LISTS!
Remote controls can sometimes lose their programming
when you change the batteries. Make sure you keep the
manual and code lists in a safe place so that you can
reprogram the remote if you need to.
Tip: This remote is already programmed to operate
most RCA-branded TVs, VCRs, DVD players and satellite
receivers. Just press the corresponding keyโDVD for
>ร๎6๎รยซ๎>รiร]ร/6รv๎รร>รรi๎iร๎ร๎๎๎]ร-๎/U๎๎๎U๎/๎รv๎รร>ร
ร>รi๎๎๎รiรรiVi๎รiร]ร6๎,U๎18รv๎รร>ร6๎,ยฐ
Your universal remote requires two AA alkaline batteries
(batteries may or may not be included, depending on model).
To install the batteries:
1. Remove the battery compartment
cover.
2. Insert the batteries, matching the
batteries to the (+) and (โ) marks
inside the battery compartment.
3. Push the battery cover back into place.
Battery Precautions:
Uร๎๎ร๎๎รร๎๎รร๎๎`ร>๎`ร๎iรรL>รรiร๎iรยฐร
Uร๎๎ร๎๎รร๎๎รร>๎๎>๎๎๎i]รรร>๎`>ร`ร๎ญV>รL๎๎๎รข๎๎Vยฎร๎รร
รiV๎
>ร}i>L๎iร๎ญ๎๎V๎i๎๎V>`๎๎ร๎ยฎรL>รรiร๎iรยฐ
Uร๎๎ร>รรรรi๎๎รiร๎๎`]รรi>๎ร๎รรร๎ร๎๎๎รรรL>รรiร๎iรรยซร๎๎ยซร๎รร
>๎`รรiVรV๎iร๎รร`๎รยซ๎รiร๎vรร๎
i๎ร๎๎ร>VV๎ร`>๎Viรร๎ร๎
ร๎๎V>๎ร
and National Regulations.
To use this universal remote with your home entertainment
system, ๏ฌrst you need to program it to control your devices.
There are four ways you can program the universal remote to
operate your devices:
Uร /๎
iรAuto Code Search goes automatically through all the
codes for the device youโre trying to control. Itโs the easiest
method, but it can sometimes take longer than some of the
other programming methods.
Uรร /๎
iรBrand Code Search searches through the codes for
select brands of devices. Itโs not as easy as the auto code
search, but it can be faster.
Uรร /๎
iรDirect Code Entry lets you enter a code from the
accompanying code list for your brand of device. Itโs not as
easy as the other methods, but itโs potentially the fastest
method.
Uรร /๎
iรManual Code Search lets you manually go through
all the codes for the device youโre trying to control.
Testing the Code for Maximum Functionality
1. Try a variety of the deviceโs functions with the remote. If
some device features donโt work, go to next step to try a
different code.
2. Repeat the Auto Code Search Method from the beginning.
7๎
i๎รร๎รรร`iร๎Viรรรร๎รร๎vv]ร`๎ร๎๎รรรร๎ยซรรi>รV๎
๎๎}ยฐร
Instead, with the unit now off, continue to press the PLAY
key every 5 seconds until the unit turns back on.
3. Once the unit turns back on, press the REVERSE key on the
remote every 2 seconds until your device turns off again.
7๎
i๎รร๎รรร`iร๎Viรรรร๎รร๎vvร>}>๎๎]รยซรiรรรร๎
iร-/"*ร๎iรยฐ
4. Test the keyโs functionality again by attempting to control
a variety of the deviceโs functions. If the code that has
been stored controls the majority of the deviceโs functions,
programming is complete. If the code stored does not give
maximum functionality, try another code.
Auto Code Search
The Auto Code Search goes automatically through all the
V๎`iรรv๎รรร๎
iร`iร๎Viรร๎รยฝรiรรรร๎๎}รร๎รV๎๎รร๎๎ยฐร7๎
i๎รร๎รรw๎`ร
the one that operates your device, you can stop the search and
store that code.
1. Manually turn on the device you
want to control.
2.ร *รiรรร>๎`ร๎
๎๎`รร๎
iร`iร๎Viร๎iรรร๎รรร>๎รรร๎รยซร๎}ร>๎ยฐร7๎
๎๎iร
youโre holding down the device key, use your other hand
to press and hold the remoteโs " U"๎๎รkey at the same
time.
3.ร 7>๎รรร๎ร๎๎รร๎
iร" U"๎๎ร๎iร comes on and stays on. Then
release both keys.
4. Point the remote directly at the
front panel of the device you
want to control. Press PLAY on
the remote and wait 5 seconds.
The remote is testing a batch of
10 codes on your device.
Did your device turn off?
YES: Go to step 5.
NO: Press PLAY again. The remote tests the next batch of
10 codes.
ร ๎iiยซรยซรiรร๎๎}ร*๎๎9รiรiรรรxรรiV๎๎`รรร๎ร๎๎รร๎รรร`iร๎Viร
turns off.
5. 7๎
i๎รร๎รรร`iร๎Viรรรร๎รร๎vv]รยซรiรรร
the REVERSE key on the remote
and wait at least 2 seconds.
The remote tries the last of the
previous ten codes.
Did your device turn on?
YES: Press the STOP key. Youโre
done! Youโve programmed this
device key.
NO: Press REVERSE again. The remote tests the next
code in the batch.
ร ๎iiยซรยซรiรร๎๎}ร,๎6๎,-๎รiรiรรรรรรiV๎๎`รรร๎ร๎๎รร๎รรร`iร๎Viร
รรร๎รรL>V๎ร๎๎ยฐร7๎
i๎ร๎รร`๎iร]รยซรiรรร-/"*ยฐ
Note: If you accidentally press the REVERSE key after your
device turns on, press the FORWARD key. Then, wait two
seconds to see if your device turns off again.
NOTES
Throughout the programming of each key, be sure to keep
the remote pointed at the IR sensor of the device you are
currently programming the remote to control.
Test the remote with the device to make sure the
device key is programmed with the correct code for
๎>ร๎๎ร๎รvร๎Vร๎๎๎>๎๎รรยฐร๎vรร๎๎iรvi>รรรiรร`๎๎ยฝรรร๎ร๎]รรรรร
>ร`๎vviรi๎รรV๎`iยฐร-iiรร๎
iรยบ/iรร๎๎}รร๎
iร๎๎`iรv๎รร๎>ร๎๎ร๎ร
Functionalityโ section below for more information.
During the Auto Code Search, the remote ignores
๎iรยซรiรรiรรร๎
>รร>รi๎ยฝรรยซ>รรร๎vรร๎
iรรi>รV๎
ยฐร
/๎
iรรi>รV๎
รร๎๎iรร๎รรร>vรiรรรร๎ร๎๎๎รรiรร๎ญร๎
iร" U"๎๎ร๎iรร
blinks four times and turns off, and the last programmed
V๎`iรร๎`iรรร๎
>รร`iร๎Viร๎iรร๎รรรiร>๎๎i`ยฎยฐ
/๎
iร" U"๎๎ร๎iรรL๎๎๎๎รรv๎รรรร๎๎iรร>๎`รรรร๎รร๎vvรร๎
i๎รร๎
iร
รi๎๎รiร๎
>รร}๎๎iรร๎
ร๎ร}๎
ร>๎๎รร๎
iรV๎`iรยฐร/๎
iรรi๎๎รiรiร๎รรร
ร๎
iร๎รร๎ร๎๎`iร-i>รV๎
ยฐร๎vรร๎รรร`iร๎Viร๎
>ร๎ยฝรรรรร๎i`ร๎vvรรiร]ร
try a different search method.
Testing the Code for Maximum Functionality
1. Try a variety of the deviceโs functions with the remote. If
some device features donโt work, go to the next step to try
a different code.
2. ร ,iยซi>รรร๎
iร๎ร>๎`ร๎๎`iร-i>รV๎
รvร๎๎รร๎
iรLi}๎๎๎๎๎}ยฐร7๎
i๎ร
the device turns off for the ๏ฌrst time, donโt press the STOP
key, which would store the same code. Instead, with the
unit now off, continue to press the " U"๎๎ key repeatedly
until the unit turns back on.
3. Once the unit turns back on, you have found another code
that operates the device. Press the STOP key.
4. Test the keyโs functionality again by attempting to control
a variety of the deviceโs functions. If the code that has
been stored controls the majority of the deviceโs functions,
programming is complete. If the code stored does not give
maximum functionality, try another code.
Brand Code Search
The Brand Code Search goes through only the codes for one of
the select brands listed in the accompanying code list. If your
brand of device is listed, this search can be very quick and easy.
TIPS: Each device key is associated with a type of deviceโ
ร๎
iร/6ร๎รรยซรiรiรรร๎รรi>รV๎
รv๎รร/6ร]ร-๎/U๎๎๎U๎/๎รv๎รรร>รi๎๎๎รiร
รiVi๎รiรร]รV>L๎iรL๎รiรร๎รร`๎}๎ร>๎ร/6รV๎๎รiรรiรร]ร๎6๎รv๎รร
๎6๎รยซ๎>รiรร]ร>๎`ร6๎,U๎18รv๎รร6๎,รร๎รร๎6,รยฐร/๎รยซร๎}ร>๎ร
a device key for a different type of device, see the Changing
>ร๎iรยฝรร๎iร๎Viร/รยซi section.
/๎
iร" U"๎๎ร๎iรรรiรรiรร>รร>๎ร๎๎`๎V>ร๎รร๎๎}๎
รร`รร๎๎}ร
programming, giving you feedback at each stage of the
process.
/๎รiร๎รรร๎ร๎
๎รรรร>ร๎๎}ร>ร๎iรรV๎`iร>รร>๎รรยซ๎๎๎รร๎๎รร๎
iร๎ร>๎`ร
Code Search, press the ๎"ร๎๎๎๎ key.
1. Manually turn on the device you
want to control.
3.ร *รiรรร>๎`ร๎
๎๎`รร๎
iร`iร๎Viร๎iรรร๎รรร>๎รรร๎รยซร๎}ร>๎ยฐร7๎
๎๎iร
youโre holding down the device key, use your other hand
ร๎รยซรiรรร>๎`ร๎
๎๎`รร๎
iรรi๎๎รiยฝรร" U"๎๎ร๎iรร>รรร๎
iรร>๎iร
time.
4.ร 7>๎รรร๎ร๎๎รร๎
iร" U"๎๎ร๎iรรV๎๎iรร๎๎ร>๎`รรร>รรร๎๎ยฐร/๎
i๎ร
release both keys.
6. Point the remote directly at the
front panel of the device you want
ร๎รV๎๎รร๎๎ยฐร*รiรรร" U"๎๎ร๎๎รร๎
iร
remote and wait 2 seconds. The
remote is testing a single code for
your deviceโs brand.
Did your device turn off?
YES: Press the STOP key to store the code. Youโre done!
Youโve programmed this device key.
NO: *รiรรร" U"๎๎ร>}>๎๎ยฐร/๎
iรรi๎๎รiรรiรรรรร๎
iร๎iรรรV๎`iร
for your brand.
ร ๎iiยซรยซรiรร๎๎}ร" U"๎๎รiรiรรรรรรiV๎๎`รรร๎ร๎๎รร๎รรร`iร๎Viร
รรร๎รร๎vvยฐร7๎
i๎ร๎รร`๎iร]รยซรiรรร-/"*ยฐ
2.ร ๎๎๎`รร๎รรร`iร๎ViยฝรรLร>๎`ร๎๎รร๎
iร
Brand Code list section of the
accompanying code list. Circle
the number for your brand and
keep the list handy.
Code
Lists
Lista
de
Cรณdigos
0
1
2
3
4
5
6
7
8
9
TV
VC
R
0
1
2
3
4
5
6
7
8
9
DV
D
SA
T/CAB
LE
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
5. Look at the number you circled for
your deviceโs brand code number.
Press that number on the remote
keypad.
NOTES
Throughout the programming of each key, be sure to keep
the remote pointed at the IR sensor of the device you are
currently programming the remote to control.
Test the remote with the device to make sure the device
๎iรร๎รรยซร๎}ร>๎๎i`รร๎ร๎
รร๎
iรV๎รรiVรรV๎`iรv๎รร๎>ร๎๎ร๎ร
vร๎Vร๎๎๎>๎๎รรยฐร๎vรร๎๎iรvi>รรรiรร`๎๎ยฝรรร๎ร๎]รรรรร>ร`๎vviรi๎รร
V๎`iยฐร-iiรร๎
iรยบ/iรร๎๎}รร๎
iร๎๎`iรv๎รร๎>ร๎๎ร๎ร๎ร๎Vร๎๎๎>๎๎รรยปร
section below for more information.
๎รร๎๎}รร๎
iร๎ร>๎`ร๎๎`iร-i>รV๎
]รร๎
iรรi๎๎รiร๎}๎๎รiรร
๎iรยซรiรรiรรร๎
>รร>รi๎ยฝรรยซ>รรร๎vรร๎
iรรi>รV๎
ยฐร
/๎
iรรi>รV๎
รร๎๎iรร๎รรร>vรiรรรร๎ร๎๎๎รรiรร๎ญร๎
iร" U"๎๎ร๎iรร
blinks four times and turns off, and the last programmed
V๎`iรร๎`iรรร๎
>รร`iร๎Viร๎iรร๎รรรiร>๎๎i`ยฎยฐ
/๎
iร" U"๎๎ร๎iรรL๎๎๎๎รรv๎รรรร๎๎iรร>๎`รรรร๎รร๎vvรร๎
i๎รร๎
iร
รi๎๎รiร๎
>รร}๎๎iรร๎
ร๎ร}๎
ร>๎๎รร๎
iรV๎`iรยฐร/๎
iรรi๎๎รiรiร๎รรรร๎
iร
๎ร>๎`ร๎๎`iร-i>รV๎
ยฐร๎vรร๎รรร`iร๎Viร๎
>ร๎ยฝรรรรร๎i`ร๎vvรรiร]รรรรร>ร
different search method.
Direct Code Entry
Direct Code Entry lets you enter a code from the accompanying
code list for your brand of device. Itโs not as easy as the other
methods, but itโs potentially the fastest method.
1. Manually turn on the device you
want to control.
3. Press and hold the device key you want to program (the
" U"๎๎ร๎iรรV๎๎iรร๎๎ยฎยฐร
ร 7๎
๎๎iรร๎รยฝรiร๎
๎๎`๎๎}ร`๎ร๎รร๎
iร`iร๎Viร๎iร]รรรiรร๎รรร๎ร๎
iรร
hand enter the ๏ฌrst ๏ฌve-digit code for your brand in the
V๎`iร๎๎รรร๎ญร๎
iร" U"๎๎ร๎iรร}๎iรร๎vvร>vรiรรร๎
iรwรรรร`๎}๎รยฎยฐ
2.ร ๎๎๎`รร๎
iร๎๎`iร๎๎รรรร๎
>รรV>๎iรร๎ร๎
ร
the remote. Locate the section for
the type of device youโre trying to
program, and ๏ฌnd your brand in
that section. Circle the codes for
your brand and keep them handy.
Code
Lists
Lista
de
Cรณdigos
0
1
2
3
4
5
6
7
8
9
TV
VC
R
0
1
2
3
4
5
6
7
8
9
DV
D
SA
T/CAB
LE
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
NOTES
,i๎i๎Liรรร๎รi๎รiรรร๎
iรV๎`iรv๎รรvรรรรiรรiviรi๎Viร๎๎รร๎
iรL๎รร
provided in the Code Retrieval section of this manual.
๎vรร๎รรรLร>๎`ร๎ร๎ยฝรร๎๎รรi`ร๎๎รร๎
iรV๎`iร๎๎รร]รรรiร๎๎iร๎vรร๎
iร๎๎`iร
-i>รV๎
ร๎iร๎
๎`รรร๎รยซร๎}ร>๎รร๎
iรรi๎๎รiรV๎๎รร๎๎ยฐร๎ญ,iviรรร๎รร๎
iร
๎รร๎ร>๎`ร๎>๎ร>๎ร๎๎`iร-i>รV๎
ร๎iร๎
๎`รยฐยฎ
If you release the device key any time during the Direct Code
๎๎รรรรยซร๎Vi`รรi]รร๎
iร" U"๎๎ร๎iรรL๎๎๎๎รรv๎รรรร๎๎iร]ร>๎`ร
ร๎
iรยซร๎Viรรร๎รรiร๎รi`ยฐร/๎
iร๎>รรรยซร๎}ร>๎๎i`รV๎`iรร๎`iรรร๎
iร
device key is retained.
Test the remote with the device to make sure the device
๎iรร๎รรยซร๎}ร>๎๎i`รร๎ร๎
รร๎
iรV๎รรiVรรV๎`iรv๎รร๎>ร๎๎ร๎ร
vร๎Vร๎๎๎>๎๎รรยฐร๎vรร๎๎iรvi>รรรiรร`๎๎ยฝรรร๎ร๎]รรรรร>ร`๎vviรi๎รรV๎`iร
in the list.
4.ร 7๎
i๎รร๎รยฝรiรw๎๎ร๎
i`รi๎รiร๎๎}รร๎
iรwรi๎`๎}๎รรV๎`i]ร๎iiยซร
๎
๎๎`๎๎}ร`๎ร๎รร๎
iร`iร๎Viร๎iรร>๎`ร๎๎๎๎ร>รรร๎
iร" U"๎๎ร๎iรยฐร
ร ๎รรร๎
iร" U"๎๎ร๎iรร๎๎ยถร
YES: Youโre done! Youโve programmed this device key.
ร "]ร๎รรL๎๎๎๎i`รv๎รรรร๎๎iรร>๎`รรรร๎i`ร๎vv\รYou have
either entered a code number that is not in the code lists or
missed a step in the code entry procedure. Try step 3 again.
Manual Code Search
The Manual Code Search lets you go one-by-one through all
ร๎
iรV๎`iรรv๎รรร๎
iร`iร๎Viรร๎รยฝรiรรรร๎๎}รร๎รV๎๎รร๎๎ยฐร7๎
i๎รร๎รรw๎`ร
the one that operates your device, you can stop the search and
store that code.
TIPS:ร/๎
iร" U"๎๎ร๎iรรรiรรiรร>รร>๎ร๎๎`๎V>ร๎รร๎๎}๎
รร`รร๎๎}ร
programming, giving you feedback at each stage of the process.
Each device key is associated with a type of deviceโthe TV is
ยซรiรiรรร๎รรi>รV๎
รv๎รร/6ร]ร-๎/U๎๎๎U๎/๎รv๎รรร>รi๎๎๎รiรรiVi๎รiรร]ร
V>L๎iรL๎รiรร๎รร`๎}๎ร>๎ร/6รV๎๎รiรรiรร]ร๎6๎รv๎รร๎6๎รยซ๎>รiรร]ร
>๎`ร6๎,U๎18รv๎รร6๎,รร๎รร๎6,รยฐร/๎รยซร๎}ร>๎ร>ร`iร๎Viร๎iรรv๎รร
a different type of device, see the ๎๎
>๎}๎๎}ร>ร๎iรยฝรร๎iร๎Viร
Type section.
The Manual Code Search method may take a long time
because the remote searches through all of the codes in
๎รรร๎i๎๎รรร๎๎i๎Lร๎๎๎iยฐร๎vรร๎รรรLร>๎`ร๎รร๎๎รรi`ร๎๎รร๎
iร๎ร>๎`ร
๎๎`iรร๎รรร๎
iร๎๎`iร๎๎รรร]รwรรรรรรรรร๎
iร๎ร>๎`ร๎๎`iร-i>รV๎
ร๎รร
the Direct Code Entry method.
/๎รiร๎รรร๎ร๎
๎รรรร>ร๎๎}ร>ร๎iรรV๎`iร>รร>๎รรยซ๎๎๎รร๎๎รร๎
iร๎>๎ร>๎ร
๎๎`iร-i>รV๎
]รยซรiรรรร๎
iร๎"ร๎๎๎๎ร๎iรยฐ
1. Manually turn on the device you
want to control.
3.ร 7>๎รรร๎ร๎๎รร๎
iร" U"๎๎ร๎iรรV๎๎iรร๎๎ร>๎`รรร>รรร๎๎ยฐร/๎
i๎ร
release both keys.
4. Point the remote directly at the front panel of the device you
ร>๎รรร๎รV๎๎รร๎๎ยฐร*รiรรร" U"๎๎ร๎๎รร๎
iรรi๎๎รiร>๎`รร>๎รรรร
seconds. The remote is testing a single code for your device.
Did your device turn off?
YES: Press the STOP key to store
the code. Youโre done! Youโve
programmed this device key.
NO: *รiรรร" U"๎๎ร>}>๎๎ยฐร/๎
iร
remote tests the next code for
your device.
ร ๎iiยซรยซรiรร๎๎}ร" U"๎๎รiรiรรรรร
seconds until your device turns off.
7๎
i๎ร๎รร`๎iร]รยซรiรรร-/"*ยฐ
TIP: Because there are so many codes, you may have to press
ร๎
iร" U"๎๎ร๎iรร๎>๎รรร๎๎iรpยซ๎รร๎L๎รร๎
ร๎`รi`รร๎vรร๎๎iรยฐ
NOTES
Throughout the programming of each key, keep the remote
pointed at the IR sensor of the device you are programming
the remote to control.
Test the remote with the device to make sure the device
๎iรร๎รรยซร๎}ร>๎๎i`รร๎ร๎
รร๎
iรV๎รรiVรรV๎`iรv๎รร๎>ร๎๎ร๎ร
vร๎Vร๎๎๎>๎๎รรยฐร๎vรร๎๎iรvi>รรรiรร`๎๎ยฝรรร๎ร๎]รรรรร>ร`๎vviรi๎รร
V๎`iยฐร-iiรร๎
iรยบ/iรร๎๎}รร๎
iร๎๎`iรv๎รร๎>ร๎๎ร๎ร๎ร๎Vร๎๎๎>๎๎รรยปร
section below for more information.
During the Manual Code Search, the remote ignores
๎iรยซรiรรiรรร๎
>รร>รi๎ยฝรรยซ>รรร๎vรร๎
iรรi>รV๎
ยฐร
/๎
iรรi>รV๎
รร๎๎iรร๎รรร>vรiรรรร๎ร๎๎๎รรiรร๎ญร๎
iร" U"๎๎ร๎iร
blinks four times and turns off, and the last programmed
V๎`iรร๎`iรรร๎
>รร`iร๎Viร๎iรร๎รรรiร>๎๎i`ยฎยฐ
The " U"๎๎ร๎iร blinks four times and turns off when the
รi๎๎รiร๎
>รร}๎๎iรร๎
ร๎ร}๎
ร>๎๎รร๎
iรV๎`iรยฐร/๎
iรรi๎๎รiรiร๎รรรร๎
iร
๎>๎ร>๎ร๎๎`iร-i>รV๎
ยฐร๎vรร๎รรร`iร๎Viร๎
>ร๎ยฝรรรรร๎i`ร๎vvรรiร]รรรรร
a different search method.
Testing the Code for Maximum Functionality
1. Try a variety of the deviceโs functions with the remote. If
some features of your devices donโt work, go to the next
step to try a different code.
2. ร ,iยซi>รรร๎
iร๎>๎ร>๎ร๎๎`iร-i>รV๎
รvร๎๎รร๎
iรLi}๎๎๎๎๎}ยฐร7๎
i๎ร
the device turns off for the ๏ฌrst time, donโt press the STOP
key, which would store the same code. Instead, with the
unit now off, continue to press the " U"๎๎รkey repeatedly
until the unit turns back on.
3. Once the unit turns back on, you have found another code
that operates the device. Press the STOP key.
4. Test the keyโs functionality again by trying a variety of
functions. If the code controls the majority of the deviceโs
functions, programming is complete. If the code stored
does not give maximum functionality, try another code.
Code Retrieval
Once youโve programmed the remote to control your devices,
you may want to record the codes for future reference. If
you used the Direct Code Entry method, this is easy. Just
๏ฌnd the codes you entered and make a note of them in the
boxes below. If you used one of the Code Search methods to
program your remote or if you used the Direct Entry method
but donโt remember the code, you will need to retrieve each
deviceโs ๏ฌve-digit code. Retrieving the actual code and writing
it down will save you time if you ever need to program the
remote again (e.g., if programming is lost when you change
the batteries). If the codes are recorded, you can use the
Direct Entry method to reprogram your remote to control your
devices, which is quick and easy.
1. Press and hold the device
๎iรร๎ญ/6]ร-๎/U๎๎๎U๎/๎]ร๎6๎]ร
6๎,U๎18ยฎรร๎
๎รiรV๎`iรร๎รร
ร๎ร๎
รร๎รรiรร๎iรiยฐร/๎
iร" U"๎๎ร
๎iรรรรร๎รร๎๎ยฐร๎iiยซรยซรiรร๎๎}รร๎
iร
device key.
IMPORTANT
๎iV>รรiรร๎
๎รรรi๎๎รiรV๎๎รร๎๎รร๎๎รiรร๎
>๎ร๎๎iร`iร๎Vi]รร๎รร
๎รรรรwรรรรยบรi๎๎ยปรร๎
iรรi๎๎รiรร๎
๎V๎
ร`iร๎Viรร๎รรร๎ร๎
รร๎ร
operate. That means, if you wish to operate your TV, you
๎รรรรwรรรรยซรiรรรร๎
iร/6ร๎iรรร๎รยซรรรร๎
iรรi๎๎รiร๎๎รร๎
iร/6ร
Mode. The remote stays in that device mode until you press
>ร`๎vviรi๎รร`iร๎Viร๎iรยฐร๎๎รรiร>๎ยซ๎i]ร๎vรร๎รรรรi๎๎รiร๎รร๎๎ร/6ร
Mode and you want to operate the DVD player, you must
press the DVD key to change device modes.
Accessing Device Menus and Guides
Many devices use on-screen menus and guides to help you
๎>ร๎}>รiรร๎
ร๎ร}๎
ร>๎๎รร๎
i๎รรvi>รรรiรร>๎`รยซร๎}ร>๎๎๎๎}ยฐร7๎
๎๎iร
this remote may not access every menu or guide system
of every device model, it does offer some menu and guide
functionality.
To use a deviceโs on-screen menu or guide system, you ๏ฌrst
have to put the remote in Menu or Guide Mode.
1. Make sure your devices are turned on and your TV is set
ร๎รร๎
iรV๎รรiVรร`iร๎Viร๎๎ยซรรร๎ญรรiรร๎
iร๎ *1/ร๎iรรร๎รร๎}}๎iร
through inputs when in TV Mode.)
2. Press the device key whose menu you want to access.
{ยฐรร 1รiรร๎
iร6"๎ยณร๎ร>๎`ร๎๎ยณร๎ร๎iรรรร๎ร
navigate through the on-screen
menu system or guide. To select the
๎
๎}๎
๎๎}๎
รi`ร๎รi๎]รยซรiรรรร๎
iร"๎ร๎iรยฐ
TIP:ร๎vรร๎
iรรi๎๎รiร`๎iร๎ยฝรรรiรยซ๎๎`]ร
V๎
iV๎รร๎รรiiรร๎
>รรร๎
iร" U"๎๎ร๎iรร๎รร
รร๎๎๎รL๎๎๎๎๎๎}ยฐร/๎
iร" U"๎๎ร๎iรรร๎๎iรร
out after 20 seconds. If this happens,
๎รรรรยซรiรรรร๎
iร๎๎ 1ร๎iรร>}>๎๎]ร>๎`ร
then retry your selection.
Exiting Menu/Guide Mode
The remote automatically times out of Menu or Guide Mode
after 20 seconds of inactivity (no keys being pressed). At that
time, the remote clears the displayed menu from the TV.
If you want to exit the Menu Mode yourself, press the
V๎รรiรยซ๎๎`๎๎}ร`iร๎Viร๎iรร๎๎รร๎
iรรi๎๎รiร๎ญ/6]ร-๎/U๎๎๎U๎/๎]ร
๎6๎]ร6๎,U๎18ยฎยฐร/๎
iร" U"๎๎ร๎iรรรรร๎รร๎vvยฐ
Problem: The remote does not operate your device.
Uรร ๎>๎iรรรรiรร๎
iรรi๎๎รiร๎รร๎๎รร๎
iรV๎รรiVรร๎๎`iรLรรยซรiรร๎๎}รร๎
iร
V๎รรiรยซ๎๎`๎๎}ร`iร๎Viร๎iรร๎ญ/6]ร-๎/U๎๎๎U๎/๎]ร๎6๎]ร6๎,U๎18ยฎยฐร
This tells the remote which device to operate.
Uรร ,i๎๎รiร>๎รร๎Lรร>V๎iรรLiรรii๎รร๎
iรรi๎๎รiร>๎`รร๎
iร`iร๎Viยฐร๎>๎iร
sure youโre aiming the remote at the deviceโs IR sensor.
Uรร ๎>๎iรรรรiรร๎
iรL>รรiร๎iรร>รiรvรiร๎
ร>๎`ร>รiรยซร๎ยซiร๎รร๎๎รร>๎๎i`ยฐร
Replace the batteries with two new AA batteries, if necessary
(see the Battery Installation section).
Problem: The remote canโt be programmed to operate your
device.
Uรร ๎vรร๎รร>รiรรiรร๎๎}รร๎
iรรi๎๎รiรร๎
๎๎iรยซร๎}ร>๎๎๎๎}ร๎ร]รร๎รร๎>รรLiร
too far away from the device or at a wrong angle. There must be
an unobstructed path between the remote and the IR sensor on
the device. Move closer and make sure you point the remote at
the device youโre trying to control.
Uรร ๎vรร๎รยฝรiรรร๎๎}รร๎
iร๎๎รiVรร๎๎รรรรยซร๎}ร>๎๎๎๎}ร๎iร๎
๎`รร๎รi๎รiรร
the codes for your brand and the unit is still not functioning
properly, try the auto, brand, or manual search method.
Uรร /๎รV๎๎รร๎๎รV๎๎L๎รร๎๎รร]ร๎๎๎iร/6ร6๎,รร๎รร/6ร๎6๎ร]รร๎รร๎รรรร
program the individual corresponding device keys to control
each part of the combo unit. Once programmed successfully, the
/6ร๎iรรV๎๎รร๎๎รรร๎
iร/6รvร๎Vร๎๎๎ร]ร>๎`รร๎
iร6๎,U๎18ร๎รร๎6๎ร๎iรร
controls the VCR or DVD functions.
Uรร ๎>๎iรรรรiรร๎
iรL>รรiร๎iรร>รiรvรiร๎
ร>๎`ร>รiรยซร๎ยซiร๎รร๎๎รร>๎๎i`ยฐ
Problem: The remote doesnโt perform commands properly.
Uรร ๎>๎iรรรรiรร๎
iรรi๎๎รiร๎รร๎๎รร๎
iรV๎รรiVรร๎๎`iรLรรยซรiรร๎๎}รร๎
iร
V๎รรiรยซ๎๎`๎๎}ร`iร๎Viร๎iรร๎ญ/6]ร-๎/U๎๎๎U๎/๎]ร๎6๎]ร6๎,U๎18ยฎยฐร
This tells the remote which device to operate.
Uรร ๎>๎iรรรรiร`iร๎Viร๎รรรi>`รร๎ญv๎รรiร>๎ยซ๎i]รร๎
iร๎6๎รยซ๎>รiรร๎
>รร>ร
disc loaded).
Uรร 9๎รร๎>รร ๎
>รiร ยซรiรรi`ร>๎ร ๎๎ร>๎ ๎`ร๎iรรv๎รร ร๎
iร๎ ๎`iรร๎
iรรi๎ ๎รiร๎ รร๎๎ยฐ
Uรร ๎vรร๎รยฝรiรรรร๎๎}รร๎รi๎รiรร>รV๎
>๎๎i๎ร๎ร๎Liรร`๎รiVร๎ร]รรรรรยซรiรร๎๎}ร
ร๎
iร"๎ร๎iรร>vรiรรi๎รiร๎๎}รร๎
iรV๎
>๎๎i๎ร๎ร๎Liรร>รรร๎
๎รร๎รร>ร
requirement of certain models and brands.
Uรร /๎
iรiร๎รร>รยซ๎รร๎L๎๎๎รรรร๎
>รร>รยซร๎}ร>๎๎i`รV๎`iร๎>รร๎๎๎รรLiร
able to control some of your device features (for example, only
turns a device on and off). To con๏ฌrm that the device key is
programmed with the correct code for maximum functionality,
test the device. Attempt to control a variety of the deviceโs
functions with the remote. If some of the features of your
devices donโt work, try programming the remote with a different
code in the list using the Direct Code Entry Method, until you
๏ฌnd the code that allows the remote to control the majority of
your deviceโs functions. Different codes can provide different
levels of functionality.
*ร๎L๎i๎\ร/๎
iร" U"๎๎ร๎iรร`๎iรร๎๎รร๎๎}๎
รรร๎
i๎รร๎รรยซรiรรร>ร๎iรยฐ
Uรร 9๎รร๎>รร๎
>รiรยซรiรรi`ร>๎ร๎๎ร>๎๎`ร๎iรรv๎รรร๎
iร๎๎`iรร๎
iรรi๎๎รiร๎รร
in.
Uร ๎>๎iรรรรiรร๎
iรรi๎๎รiร๎รร๎๎รร๎
iรV๎รรiVรร๎๎`iรLรรยซรiรร๎๎}รร๎
iร
V๎รรiรยซ๎๎`๎๎}ร`iร๎Viร๎iรร๎ญ/6]ร-๎/U๎๎๎U๎/๎]ร๎6๎]ร6๎,U๎18ยฎยฐร
This tells the remote which device to operate.
Uรร ๎>๎iรรรรiรร๎
iรL>รรiร๎iรร>รiรvรiร๎
ร>๎`ร>รiรยซร๎ยซiร๎รร๎๎รร>๎๎i`ยฐร
Replace the batteries with two new AA batteries, if necessary
(see the Battery Installation section).
*ร๎L๎i๎\ร/๎
iรรi๎๎รiรร๎๎๎ร๎๎รรV๎
>๎}iรV๎
>๎๎i๎รร๎๎ร`iร๎Viยฐ
Uร ๎>๎iรรรรiรร๎
iรรi๎๎รiร๎รร๎๎รร๎
iรV๎รรiVรร๎๎`iรLรรยซรiรร๎๎}รร๎
iร
V๎รรiรยซ๎๎`๎๎}ร`iร๎Viร๎iรร๎ญ/6]ร-๎/U๎๎๎U๎/๎]ร๎6๎]ร6๎,U๎18ยฎยฐร
This tells the remote which device to operate.
Uรร *รiรรรร๎
iร"๎ร๎iรร>vรiรรร๎รรi๎รiรร>รV๎
>๎๎i๎ร๎ร๎Liรยฐ
Uรร ,i๎๎รiร>๎รร๎Lรร>V๎iรรLiรรii๎รร๎
iรรi๎๎รiร>๎`รร๎
iร`iร๎Viยฐร๎>๎iร
sure to aim the remote at the IR sensor on the device.
Problem: The deviceโs menu does not appear on the TV screen.
Uรร ๎>๎iรรรรiรร๎รร๎
>รiรV๎๎๎iVรi`รร๎
iร`iร๎Viรร๎รร๎รรร/6รยซร๎ยซiร๎รร>๎`ร
selected the correct input. (See your devicesโ Ownerโs Manuals for
proper connection procedures.)
Uร ๎>๎iรรรรiรร๎
iรรi๎๎รiร๎รร๎๎รร๎
iรV๎รรiVรร๎๎`iรLรรยซรiรร๎๎}รร๎
iร
V๎รรiรยซ๎๎`๎๎}ร`iร๎Viร๎iรร๎ญ/6]ร-๎/U๎๎๎U๎/๎]ร๎6๎]ร6๎,U๎18ยฎยฐร
This tells the remote which device to operate.
Uรร ๎i๎รร>VViรรร๎ร๎ยฝรรรรยซยซ๎รรi`รv๎รร>๎๎รLร>๎`รยฐร9๎รร๎>รร๎ii`รร๎รรรiร
your original remote control to access menu functions for some
devices.
๎๎รร๎๎รiร๎๎v๎ร๎>ร๎๎๎]รยซ๎i>รiรร๎ร๎รรรรรยฐรV>>VViรร๎ร๎iรยฐV๎๎
Consumer Help Line: 1-800-420-7968
Audiovox Electronics Corporation (the โCompanyโ) warrants to you the
original retail purchaser of this product that should it, under normal use
and conditions, be proven defective in material or workmanship during
its lifetime while you own it, such defect(s) will be repaired or replaced
(at the Companyโs option) without charge for parts and repair labor. To
๎Lร>๎๎รรiยซ>๎รร๎รรรiยซ๎>Vi๎i๎รรร๎ร๎
๎๎รร๎
iรรiร๎รร๎vรร๎
๎รร7>รร>๎รร]รร๎
iรยซร๎`รVรร
is to be delivered with proof of warranty coverage (e.g. dated bill of sale),
speci๏ฌcation of defect(s), transportation prepaid, to the Company at the
address shown below.
/๎
๎รร7>รร>๎รรร`๎iรร๎๎รรV๎รiรรยซร๎`รVรรยซรรV๎
>รi`]รรiรร๎Vi`ร๎รรรรi`ร๎รรร๎`iร
ร๎
iร1๎๎รi`ร-ร>รiรร๎รร๎>๎>`>ยฐร/๎
๎รร7>รร>๎รรร๎รร๎๎รรรร>๎รviร>L๎iร>๎`ร`๎iรร
not extend to costs incurred for installation, removal or reinstallation of
ร๎
iรยซร๎`รVรยฐร/๎
๎รร7>รร>๎รรร`๎iรร๎๎รร>ยซยซ๎รร๎vร๎๎รร๎
iร๎๎๎ยซ>๎รยฝรร๎ยซ๎๎๎๎๎]ร
the product has been damaged through alteration, improper installation,
mishandling, misuse, neglect, accident, or the simultaneous use of different
battery types (e.g. alkaline, standard or rechargeable).
/๎๎ร๎8/๎ /ร"๎ร/๎๎ร๎"๎*๎ 9ยฝ-ร๎๎๎๎๎๎๎/9ร1 ๎๎,ร/๎๎-ร7๎,,๎ /9ร๎-ร
LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO
๎6๎ /]ร-๎๎๎๎ร/๎๎ร๎"๎*๎ 9ยฝ-ร๎๎๎๎๎๎๎/9ร๎8๎๎๎๎ร/๎๎ร*1,๎๎๎-๎ร*,๎๎๎ร
*๎๎๎ร๎9ร*1,๎๎๎-๎,ร๎",ร/๎๎ร*,"๎1๎/ยฐ
/๎
๎รร7>รร>๎รรร๎รร๎๎ร๎๎iรร๎vร>๎๎ร๎ร๎
iรรiรยซรiรรรร>รร>๎ร๎iรร๎รร๎๎>L๎๎๎ร๎iรยฐร๎ 9ร
๎๎*๎๎๎๎ร7๎,,๎ /๎๎-]ร๎ ๎๎1๎๎ ๎ร๎ 9ร๎๎*๎๎๎๎ร7๎,,๎ /9ร"๎ร
๎๎,๎๎๎ /๎๎๎๎๎/9ร",ร๎๎/ ๎--ร๎",ร๎ร*๎,/๎๎1๎๎,ร*1,*"-๎ร-๎๎๎๎ร
๎๎ร๎๎๎๎/๎๎ร/"ร๎1,๎/๎" ร"๎ร/๎๎-ร7๎,,๎ /9ยฐร๎ ร "ร๎๎-๎ร-๎๎๎๎ร
/๎๎ร๎"๎*๎ 9ร๎๎ร๎๎๎๎๎๎ร๎",ร๎ 9ร๎" -๎+1๎ /๎๎๎ร",ร๎ ๎๎๎๎ /๎๎ร
๎๎๎๎๎๎-ร7๎๎/-"๎6๎,ยฐร ๎รยซiรร๎๎ร๎รรรiยซรiรi๎ร>ร๎รiร๎รร>รร๎
๎ร๎รขi`ร
to assume for the Company any liability other than expressed herein in
connection with the sale of this product.
Some states/provinces do not allow limitations on how long an implied
warranty lasts or the exclusion or limitation of incidental or consequential
damage so the above limitations or exclusions may not apply to you. This
7>รร>๎รรร}๎รiรรร๎รรรยซiV๎wVร๎i}>๎รร๎}๎
รรร>๎`รร๎รร๎>รร>๎ร๎ร๎
>รiร๎ร๎
iรรร๎}๎
รร]ร
which vary from state/province to state/province.
U.S.A.: Audiovox Electronics Corporation, 150 Marcus Blvd., Hauppauge,
New York 11788
CANADA: ๎ร`๎๎ร๎รร,iรรร๎ร๎i๎รiร]รVร๎ร๎i๎V๎]รรรnxร๎i๎๎i`รร,๎>`]ร
1๎๎รรร]ร๎๎๎รรยฃร]ร๎๎รร๎รร>ร}>]ร"๎ร>ร๎๎รร๎x/รร๎x
Trademark(s) ยฎ Registered
,๎,{ยฃรร1-รรคx
ยฉ2010 Audiovox Accessories Corporation
111 Congressional Blvd., Suite 350
Carmel, IN 46032
Step 1: Install your batteries
Step 2: Program your remote
Tour of the Remote
Advanced Functions
Troubleshooting
Limited Lifetime Warranty
3
DVD CODE
5
SATโขCBLโขDTC CODE
1
TV CODE
SAT CABLE DTV CONVERTER
รยฐรร /๎ร>VViรรร๎i๎รร]รยซรiรรรร๎
iร๎๎ 1ร๎iรยฐร/๎ร>VViรรร}ร๎`iร]ร
ยซรiรรรร๎
iร๎1๎๎๎ร๎iรยฐร/๎
iร" U"๎๎ร๎iรรรร>รรรรL๎๎๎๎๎๎}]ร
indicating you are in Menu or Guide Mode.
" U"๎๎ร๎iร
2.ร *รiรรร>๎`ร๎
๎๎`รร๎
iร`iร๎Viร๎iรรร๎รรร>๎รรร๎รยซร๎}ร>๎ยฐร7๎
๎๎iร
youโre holding down the device key, use your other hand
ร๎รยซรiรรร>๎`ร๎
๎๎`รร๎
iรรi๎๎รiยฝรร" U"๎๎ร๎iรร>รรร๎
iรร>๎iร
time.
Note: All TV codes begin with the number 1; all VCR and DVR
codes begin with the number 2; all DVDs, the number 3; and
>๎๎รร>รi๎๎๎รiรรiVi๎รiรร]รV>L๎iรL๎รiรร>๎`ร`๎}๎ร>๎ร/6รV๎๎รiรรiรร]ร
the number 5.
5. Repeat step 4 until you have retrieved all ๏ฌve numbers in
ร๎
iรV๎`iยฐร๎vรiรรร๎
iรwvร๎
ร๎ร๎Liรร๎รรรiรร๎iรi`]รร๎
iร" U"๎๎ร
key blinks brie๏ฌy, then turns off.
TIP:ร/๎รiร๎รรร๎
iร๎๎`iร,iรร๎iร>๎ร๎๎`iร>รร>๎รรร๎๎i]รยซรiรรรร๎
iร
๎"ร๎๎๎๎ร๎iรยฐ
Note: If you press an invalid key during the Code Retrieval
process, the remote will not respond. If you do not press a
ร>๎๎`ร๎๎`iร,iรร๎iร>๎ร๎iรร๎ญ/6]ร-๎/U๎๎๎U๎/๎]ร๎6๎]ร6๎,U๎18]ร
๎ ๎"]ร๎"ร๎๎๎๎ยฎ]ร๎๎`iร,iรร๎iร>๎รร๎๎iรร๎รรร>vรiรรยฃxรรiV๎๎`รยฐร
/๎
iร" U"๎๎ร๎iรรL๎๎๎๎รรv๎รรรร๎๎iร]ร>๎`รร๎
i๎รรรร๎รร๎vvยฐ
๎"ร๎๎๎๎ exits remote programming; it also performs the
same functions as on your original remotes.
Theร๎ *1/ and pร๎ญ`>ร๎
ยฎรkey has three functions: (1) it toggles
through all the video sources connected to your TV; (2) when
the remote is in VCR mode, this button toggles between VCR
and the TV input; (3) when youโre entering digital channel
numbers directly, this button lets you separate the main
channel number from the sub-channel number (such as 59.1).
๎>V๎๎๎}๎
ร๎๎}
Backlight illumination helps you see the remote control keys
better in the dark. You can turn backlight illumination on or off
by pressing the backlight key ( ). Backlighting stays on as
long as keys are being pressed and turns off six seconds after
the last keypress. Once the backlight time has timed out, any
keypress will reactivate it. If the backlight illumination is on,
and you press the backlight key, the backlight turns off.
รยฐรร 7๎
๎๎iร๎
๎๎`๎๎}รร๎
iร`iร๎Viร๎iรร`๎ร๎]รยซรiรรร>๎`ร๎
๎๎`รร๎
iร
๎ ๎"ร๎iรยฐร/๎
iร" U"๎๎ร๎iรรรรร๎รร๎vvยฐร๎vรiรร๎
๎๎`๎๎}ร`๎ร๎ร
L๎ร๎
ร๎iรรรv๎รรร๎
รiiรรiV๎๎`ร]รร๎
iร" U"๎๎ร๎iรรรรร๎รรL>V๎ร
on.
รยฐรร ,i๎i>รiรL๎ร๎
ร๎iรรยฐร/๎
iร" U"๎๎ร๎iรรรi๎>๎๎รร๎๎ยฐ
4. Starting with the number 1 key, press and release each
number key on the keypad in the following order: 1-9, then
รคยฐร/๎
iร๎ร๎Liรรร๎
>รรV>รรiรรร๎
iร" U"๎๎ร๎iรรร๎รL๎๎๎๎ร๎รรร๎
iร
๏ฌrst number of the code. As you ๏ฌnd each number of the
code, write it down for future reference.
TIP: Each device key is associated with a type of deviceโthe
/6ร๎รรยซรiรiรรร๎รรi>รV๎
รv๎รร/6ร]ร-๎/U๎๎๎U๎/๎รv๎รรร>รi๎๎๎รiร
รiVi๎รiรร]รV>L๎iรL๎รiรร๎รร`๎}๎ร>๎ร/6รV๎๎รiรรiรร]ร๎6๎รv๎รร๎6๎ร
ยซ๎>รiรร]ร>๎`ร6๎,U๎18รv๎รร6๎,รร>๎`ร๎6,รยฐร/๎รยซร๎}ร>๎ร>ร
device key for a different type of device, see the Changing a
๎iรยฝรร๎iร๎Viร/รยซi section.
/๎
iร" U"๎๎ร๎iรรรiรรiรร>รร>๎ร๎๎`๎V>ร๎รร๎๎}๎
รร`รร๎๎}ร
programming, giving you feedback at each stage of the
process.
Actual model may vary
from illustration
TIPS: Each device key is associated with a type of deviceโ
ร๎
iร/6ร๎รรยซรiรiรรร๎รรi>รV๎
รv๎รร/6ร]ร-๎/U๎๎๎U๎/๎รv๎รรร>รi๎๎๎รiร
รiVi๎รiรร]รV>L๎iรL๎รiรร๎รร`๎}๎ร>๎ร/6รV๎๎รiรรiรร]ร๎6๎รv๎รร
๎6๎รยซ๎>รiรร]ร>๎`ร6๎,U๎18รv๎รร6๎,รร๎รร๎6,รยฐร/๎รยซร๎}ร>๎ร
a device key for a different type of device, see the Changing
>ร๎iรยฝรร๎iร๎Viร/รยซi section.
/๎รiร๎รรร๎ร๎
๎รรรร>ร๎๎}ร>ร๎iรรV๎`iร>รร>๎รรยซ๎๎๎รร๎๎รร๎
iร๎รร๎ร
Code Search, press the ๎"ร๎๎๎๎ key.
Changing A Keyโs Device Type
Each device key is associated with a type of deviceโthe TV is
ยซรiรiรรร๎รรi>รV๎
รv๎รร/6ร]ร-๎/U๎๎๎U๎/๎รv๎รรร>รi๎๎๎รiรรiVi๎รiรร]ร
cable boxes or digital TV converters, DVD for DVD players, and
6๎,U๎18รv๎รร6๎,รร๎รร๎6,รยฐร/๎รยซร๎}ร>๎รร๎
iรiร๎iรรรร๎รV๎๎รร๎๎ร
a different kind of device, you have to reassign them ๏ฌrst.
,i>รร๎}๎๎๎}รร๎
iร6๎,U๎18ร๎iรร/๎ร๎๎๎รร๎๎ร"ร๎
iรร
Devices
/๎
iร6๎,U๎18ร๎iรร`iv>ร๎รรรร๎รV๎๎รร๎๎ร>ร6๎,ร๎รร๎6,ยฐร๎vรร๎รรร>๎รร
ร๎
iร6๎,U๎18ร๎iรรร๎รV๎๎รร๎๎ร>ร`๎vviรi๎รร`iร๎Viร๎ญ>๎ร>``๎ร๎๎๎>๎ร
TV, DVD, satellite, cable box or digital TV converter, for
example), you must reassign it.
ยฃยฐรร *รiรรร>๎`ร๎
๎๎`รร๎
iร6๎,U๎18ร๎iรยฐร/๎
iร" U"๎๎ร๎iรรรรร๎รร๎๎ยฐ
รยฐรร 7๎
๎๎iร๎
๎๎`๎๎}ร`๎ร๎รร๎
iร6๎,U๎18ร๎iร]รยซรiรรร>๎`รรi๎i>รiรร๎
iร
number key on the keypad for the device you wish to control
๎ญรiiรร๎
iรV๎
>รรรLi๎๎รยฎยฐร/๎
iร" U"๎๎ร๎iรรรรร๎รร๎vvยฐ
รยฐรร ,i๎i>รiรร๎
iร6๎,U๎18ร๎iรยฐร/๎
iร" U"๎๎ร๎iรรL๎๎๎๎รรv๎รรร
ร๎๎iรร>๎`รร๎
i๎รรรร๎รร๎vvยฐร/๎
iร6๎,U๎18ร๎iรร๎รร๎๎รรรiรรร๎ร
control the device type you selected.
{ยฐรร ๎๎๎๎๎รรร๎
iร`๎รiVร๎๎๎รร๎๎รร๎
iร>รร๎]รLร>๎`]ร`๎รiVรรi๎รรร]ร๎รร
๎>๎ร>๎รV๎`iรรi>รV๎
รร๎รยซร๎}ร>๎รร๎
iร6๎,U๎18ร๎iรยฐร
6๎,U๎18ร๎๎9ร๎" /,"๎-\
Additional TV press 1
VCR or DVR press 2
Additional DVD press 3
Additional satellite, cable box or
digital TV converter
press 5
VCRโขAUX CODE
DVR/VCR DVD TV -๎/U๎๎๎U๎/๎
In most cases, the keys on
this remote perform the same
functions as the keys on your
original remotes once youโve
programmed this remote to
operate your components.
Many keys on this remote
have other functions as well.
Illuminated " U"๎๎ key
serves as an indicator light to
provide feedback.
Device keys (TV,
-๎/U๎๎๎U๎/๎, ๎6๎,
6๎,U๎18) put the remote in
the right mode to control your
device.
Backlight key (
) turns
backlighting on/off.
๎1๎๎๎ and ๎๎ 1 put the
remote in menu/guide mode,
which makes the ๎๎ร6"๎ร
keys serve as arrow keys;
they also access the same
features as the keys on your
original remotes.
๎๎ and 6"๎ keys have dual
functions: they can act as
navigation keys in menu
systems as well as channel
and volume controllers
outside the menus. The
CH keys also provide skip
forward and skip back control
for DVD players and DVRs
that support this functionality.
Battery Saver
Your universal remote control saves battery power by
automatically turning off if any key is pressed for more than
60 seconds. This saves your battery life should your remote
get stuck in a place where the keys remain depressed, such as
between sofa cushions.
Universal Remote Control
Ownerโs Manual
RCR412BR / RCR412SR / RCR412SIR
Manual del Propietario (parte posterior)
Care and Maintenance
Uรร๎iiยซรร๎
iรรi๎๎รiร`รรยฐร๎vร๎รร}iรรรรiร]รร๎ยซiร๎รร`รรร๎๎๎i`๎>รi๎รยฐ
Uรร1รiร>๎`รรร๎รiรร๎
iรรi๎๎รiร๎๎๎รร๎๎ร๎๎ร๎>๎รรi๎ยซiร>รรรiร
environments.
Uรร๎>๎`๎iรร๎
iรรi๎๎รiร}i๎ร๎รร>๎`รV>รivร๎๎รยฐร๎๎๎ยฝรร`ร๎ยซร๎รยฐ
Uรร๎iiยซรร๎
iรรi๎๎รiร>ร>รรvร๎๎ร`รรรร>๎`ร`๎รรยฐ
Uรร7๎ยซiรร๎
iรรi๎๎รiรร๎ร๎
ร>ร`>๎ยซรV๎๎ร๎
ร๎VV>ร๎๎๎>๎๎รรร๎ร๎iiยซร๎รร
looking new.
Uรร๎๎`๎vร๎๎}ร๎รรร>๎ยซiร๎๎}รร๎ร๎
รร๎
iรรi๎๎รiยฝรร๎๎รiร๎>๎ร`iร๎ViรรV>๎ร
cause malfunction and invalidate its warranty.
SAVE THIS MANUAL AND THE CODE LISTS!
Remote controls can sometimes lose their programming
when you change the batteries. Make sure you keep the
manual and code lists in a safe place so that you can
reprogram the remote if you need to.
Tip: This remote is already programmed to operate
most RCA-branded TVs, VCRs, DVD players and satellite
receivers. Just press the corresponding keyโDVD for
>ร๎6๎รยซ๎>รiร]ร/6รv๎รร>รรi๎iร๎ร๎๎๎]ร-๎/U๎๎๎U๎/๎รv๎รร>ร
ร>รi๎๎๎รiรรiVi๎รiร]ร6๎,U๎18รv๎รร>ร6๎,ยฐ
Your universal remote requires two AA alkaline batteries
(batteries may or may not be included, depending on model).
To install the batteries:
1. Remove the battery compartment
cover.
2. Insert the batteries, matching the
batteries to the (+) and (โ) marks
inside the battery compartment.
3. Push the battery cover back into place.
Battery Precautions:
Uร๎๎ร๎๎รร๎๎รร๎๎`ร>๎`ร๎iรรL>รรiร๎iรยฐร
Uร๎๎ร๎๎รร๎๎รร>๎๎>๎๎๎i]รรร>๎`>ร`ร๎ญV>รL๎๎๎รข๎๎Vยฎร๎รร
รiV๎
>ร}i>L๎iร๎ญ๎๎V๎i๎๎V>`๎๎ร๎ยฎรL>รรiร๎iรยฐ
Uร๎๎ร>รรรรi๎๎รiร๎๎`]รรi>๎ร๎รรร๎ร๎๎๎รรรL>รรiร๎iรรยซร๎๎ยซร๎รร
>๎`รรiVรV๎iร๎รร`๎รยซ๎รiร๎vรร๎
i๎ร๎๎ร>VV๎ร`>๎Viรร๎ร๎
ร๎๎V>๎ร
and National Regulations.
To use this universal remote with your home entertainment
system, ๏ฌrst you need to program it to control your devices.
There are four ways you can program the universal remote to
operate your devices:
Uร /๎
iรAuto Code Search goes automatically through all the
codes for the device youโre trying to control. Itโs the easiest
method, but it can sometimes take longer than some of the
other programming methods.
Uรร /๎
iรBrand Code Search searches through the codes for
select brands of devices. Itโs not as easy as the auto code
search, but it can be faster.
Uรร /๎
iรDirect Code Entry lets you enter a code from the
accompanying code list for your brand of device. Itโs not as
easy as the other methods, but itโs potentially the fastest
method.
Uรร /๎
iรManual Code Search lets you manually go through
all the codes for the device youโre trying to control.
Testing the Code for Maximum Functionality
1. Try a variety of the deviceโs functions with the remote. If
some device features donโt work, go to next step to try a
different code.
2. Repeat the Auto Code Search Method from the beginning.
7๎
i๎รร๎รรร`iร๎Viรรรร๎รร๎vv]ร`๎ร๎๎รรรร๎ยซรรi>รV๎
๎๎}ยฐร
Instead, with the unit now off, continue to press the PLAY
key every 5 seconds until the unit turns back on.
3. Once the unit turns back on, press the REVERSE key on the
remote every 2 seconds until your device turns off again.
7๎
i๎รร๎รรร`iร๎Viรรรร๎รร๎vvร>}>๎๎]รยซรiรรรร๎
iร-/"*ร๎iรยฐ
4. Test the keyโs functionality again by attempting to control
a variety of the deviceโs functions. If the code that has
been stored controls the majority of the deviceโs functions,
programming is complete. If the code stored does not give
maximum functionality, try another code.
Auto Code Search
The Auto Code Search goes automatically through all the
V๎`iรรv๎รรร๎
iร`iร๎Viรร๎รยฝรiรรรร๎๎}รร๎รV๎๎รร๎๎ยฐร7๎
i๎รร๎รรw๎`ร
the one that operates your device, you can stop the search and
store that code.
1. Manually turn on the device you
want to control.
2.ร *รiรรร>๎`ร๎
๎๎`รร๎
iร`iร๎Viร๎iรรร๎รรร>๎รรร๎รยซร๎}ร>๎ยฐร7๎
๎๎iร
youโre holding down the device key, use your other hand
to press and hold the remoteโs " U"๎๎รkey at the same
time.
3.ร 7>๎รรร๎ร๎๎รร๎
iร" U"๎๎ร๎iร comes on and stays on. Then
release both keys.
4. Point the remote directly at the
front panel of the device you
want to control. Press PLAY on
the remote and wait 5 seconds.
The remote is testing a batch of
10 codes on your device.
Did your device turn off?
YES: Go to step 5.
NO: Press PLAY again. The remote tests the next batch of
10 codes.
ร ๎iiยซรยซรiรร๎๎}ร*๎๎9รiรiรรรxรรiV๎๎`รรร๎ร๎๎รร๎รรร`iร๎Viร
turns off.
5. 7๎
i๎รร๎รรร`iร๎Viรรรร๎รร๎vv]รยซรiรรร
the REVERSE key on the remote
and wait at least 2 seconds.
The remote tries the last of the
previous ten codes.
Did your device turn on?
YES: Press the STOP key. Youโre
done! Youโve programmed this
device key.
NO: Press REVERSE again. The remote tests the next
code in the batch.
ร ๎iiยซรยซรiรร๎๎}ร,๎6๎,-๎รiรiรรรรรรiV๎๎`รรร๎ร๎๎รร๎รรร`iร๎Viร
รรร๎รรL>V๎ร๎๎ยฐร7๎
i๎ร๎รร`๎iร]รยซรiรรร-/"*ยฐ
Note: If you accidentally press the REVERSE key after your
device turns on, press the FORWARD key. Then, wait two
seconds to see if your device turns off again.
NOTES
Throughout the programming of each key, be sure to keep
the remote pointed at the IR sensor of the device you are
currently programming the remote to control.
Test the remote with the device to make sure the
device key is programmed with the correct code for
๎>ร๎๎ร๎รvร๎Vร๎๎๎>๎๎รรยฐร๎vรร๎๎iรvi>รรรiรร`๎๎ยฝรรร๎ร๎]รรรรร
>ร`๎vviรi๎รรV๎`iยฐร-iiรร๎
iรยบ/iรร๎๎}รร๎
iร๎๎`iรv๎รร๎>ร๎๎ร๎ร
Functionalityโ section below for more information.
During the Auto Code Search, the remote ignores
๎iรยซรiรรiรรร๎
>รร>รi๎ยฝรรยซ>รรร๎vรร๎
iรรi>รV๎
ยฐร
/๎
iรรi>รV๎
รร๎๎iรร๎รรร>vรiรรรร๎ร๎๎๎รรiรร๎ญร๎
iร" U"๎๎ร๎iรร
blinks four times and turns off, and the last programmed
V๎`iรร๎`iรรร๎
>รร`iร๎Viร๎iรร๎รรรiร>๎๎i`ยฎยฐ
/๎
iร" U"๎๎ร๎iรรL๎๎๎๎รรv๎รรรร๎๎iรร>๎`รรรร๎รร๎vvรร๎
i๎รร๎
iร
รi๎๎รiร๎
>รร}๎๎iรร๎
ร๎ร}๎
ร>๎๎รร๎
iรV๎`iรยฐร/๎
iรรi๎๎รiรiร๎รรร
ร๎
iร๎รร๎ร๎๎`iร-i>รV๎
ยฐร๎vรร๎รรร`iร๎Viร๎
>ร๎ยฝรรรรร๎i`ร๎vvรรiร]ร
try a different search method.
Testing the Code for Maximum Functionality
1. Try a variety of the deviceโs functions with the remote. If
some device features donโt work, go to the next step to try
a different code.
2. ร ,iยซi>รรร๎
iร๎ร>๎`ร๎๎`iร-i>รV๎
รvร๎๎รร๎
iรLi}๎๎๎๎๎}ยฐร7๎
i๎ร
the device turns off for the ๏ฌrst time, donโt press the STOP
key, which would store the same code. Instead, with the
unit now off, continue to press the " U"๎๎ key repeatedly
until the unit turns back on.
3. Once the unit turns back on, you have found another code
that operates the device. Press the STOP key.
4. Test the keyโs functionality again by attempting to control
a variety of the deviceโs functions. If the code that has
been stored controls the majority of the deviceโs functions,
programming is complete. If the code stored does not give
maximum functionality, try another code.
Brand Code Search
The Brand Code Search goes through only the codes for one of
the select brands listed in the accompanying code list. If your
brand of device is listed, this search can be very quick and easy.
TIPS: Each device key is associated with a type of deviceโ
ร๎
iร/6ร๎รรยซรiรiรรร๎รรi>รV๎
รv๎รร/6ร]ร-๎/U๎๎๎U๎/๎รv๎รรร>รi๎๎๎รiร
รiVi๎รiรร]รV>L๎iรL๎รiรร๎รร`๎}๎ร>๎ร/6รV๎๎รiรรiรร]ร๎6๎รv๎รร
๎6๎รยซ๎>รiรร]ร>๎`ร6๎,U๎18รv๎รร6๎,รร๎รร๎6,รยฐร/๎รยซร๎}ร>๎ร
a device key for a different type of device, see the Changing
>ร๎iรยฝรร๎iร๎Viร/รยซi section.
/๎
iร" U"๎๎ร๎iรรรiรรiรร>รร>๎ร๎๎`๎V>ร๎รร๎๎}๎
รร`รร๎๎}ร
programming, giving you feedback at each stage of the
process.
/๎รiร๎รรร๎ร๎
๎รรรร>ร๎๎}ร>ร๎iรรV๎`iร>รร>๎รรยซ๎๎๎รร๎๎รร๎
iร๎ร>๎`ร
Code Search, press the ๎"ร๎๎๎๎ key.
1. Manually turn on the device you
want to control.
3.ร *รiรรร>๎`ร๎
๎๎`รร๎
iร`iร๎Viร๎iรรร๎รรร>๎รรร๎รยซร๎}ร>๎ยฐร7๎
๎๎iร
youโre holding down the device key, use your other hand
ร๎รยซรiรรร>๎`ร๎
๎๎`รร๎
iรรi๎๎รiยฝรร" U"๎๎ร๎iรร>รรร๎
iรร>๎iร
time.
4.ร 7>๎รรร๎ร๎๎รร๎
iร" U"๎๎ร๎iรรV๎๎iรร๎๎ร>๎`รรร>รรร๎๎ยฐร/๎
i๎ร
release both keys.
6. Point the remote directly at the
front panel of the device you want
ร๎รV๎๎รร๎๎ยฐร*รiรรร" U"๎๎ร๎๎รร๎
iร
remote and wait 2 seconds. The
remote is testing a single code for
your deviceโs brand.
Did your device turn off?
YES: Press the STOP key to store the code. Youโre done!
Youโve programmed this device key.
NO: *รiรรร" U"๎๎ร>}>๎๎ยฐร/๎
iรรi๎๎รiรรiรรรรร๎
iร๎iรรรV๎`iร
for your brand.
ร ๎iiยซรยซรiรร๎๎}ร" U"๎๎รiรiรรรรรรiV๎๎`รรร๎ร๎๎รร๎รรร`iร๎Viร
รรร๎รร๎vvยฐร7๎
i๎ร๎รร`๎iร]รยซรiรรร-/"*ยฐ
2.ร ๎๎๎`รร๎รรร`iร๎ViยฝรรLร>๎`ร๎๎รร๎
iร
Brand Code list section of the
accompanying code list. Circle
the number for your brand and
keep the list handy.
Code
Lists
Lista
de
Cรณdigos
0
1
2
3
4
5
6
7
8
9
TV
VC
R
0
1
2
3
4
5
6
7
8
9
DV
D
SA
T/CAB
LE
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
5. Look at the number you circled for
your deviceโs brand code number.
Press that number on the remote
keypad.
NOTES
Throughout the programming of each key, be sure to keep
the remote pointed at the IR sensor of the device you are
currently programming the remote to control.
Test the remote with the device to make sure the device
๎iรร๎รรยซร๎}ร>๎๎i`รร๎ร๎
รร๎
iรV๎รรiVรรV๎`iรv๎รร๎>ร๎๎ร๎ร
vร๎Vร๎๎๎>๎๎รรยฐร๎vรร๎๎iรvi>รรรiรร`๎๎ยฝรรร๎ร๎]รรรรร>ร`๎vviรi๎รร
V๎`iยฐร-iiรร๎
iรยบ/iรร๎๎}รร๎
iร๎๎`iรv๎รร๎>ร๎๎ร๎ร๎ร๎Vร๎๎๎>๎๎รรยปร
section below for more information.
๎รร๎๎}รร๎
iร๎ร>๎`ร๎๎`iร-i>รV๎
]รร๎
iรรi๎๎รiร๎}๎๎รiรร
๎iรยซรiรรiรรร๎
>รร>รi๎ยฝรรยซ>รรร๎vรร๎
iรรi>รV๎
ยฐร
/๎
iรรi>รV๎
รร๎๎iรร๎รรร>vรiรรรร๎ร๎๎๎รรiรร๎ญร๎
iร" U"๎๎ร๎iรร
blinks four times and turns off, and the last programmed
V๎`iรร๎`iรรร๎
>รร`iร๎Viร๎iรร๎รรรiร>๎๎i`ยฎยฐ
/๎
iร" U"๎๎ร๎iรรL๎๎๎๎รรv๎รรรร๎๎iรร>๎`รรรร๎รร๎vvรร๎
i๎รร๎
iร
รi๎๎รiร๎
>รร}๎๎iรร๎
ร๎ร}๎
ร>๎๎รร๎
iรV๎`iรยฐร/๎
iรรi๎๎รiรiร๎รรรร๎
iร
๎ร>๎`ร๎๎`iร-i>รV๎
ยฐร๎vรร๎รรร`iร๎Viร๎
>ร๎ยฝรรรรร๎i`ร๎vvรรiร]รรรรร>ร
different search method.
Direct Code Entry
Direct Code Entry lets you enter a code from the accompanying
code list for your brand of device. Itโs not as easy as the other
methods, but itโs potentially the fastest method.
1. Manually turn on the device you
want to control.
3. Press and hold the device key you want to program (the
" U"๎๎ร๎iรรV๎๎iรร๎๎ยฎยฐร
ร 7๎
๎๎iรร๎รยฝรiร๎
๎๎`๎๎}ร`๎ร๎รร๎
iร`iร๎Viร๎iร]รรรiรร๎รรร๎ร๎
iรร
hand enter the ๏ฌrst ๏ฌve-digit code for your brand in the
V๎`iร๎๎รรร๎ญร๎
iร" U"๎๎ร๎iรร}๎iรร๎vvร>vรiรรร๎
iรwรรรร`๎}๎รยฎยฐ
2.ร ๎๎๎`รร๎
iร๎๎`iร๎๎รรรร๎
>รรV>๎iรร๎ร๎
ร
the remote. Locate the section for
the type of device youโre trying to
program, and ๏ฌnd your brand in
that section. Circle the codes for
your brand and keep them handy.
Code
Lists
Lista
de
Cรณdigos
0
1
2
3
4
5
6
7
8
9
TV
VC
R
0
1
2
3
4
5
6
7
8
9
DV
D
SA
T/CAB
LE
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
NOTES
,i๎i๎Liรรร๎รi๎รiรรร๎
iรV๎`iรv๎รรvรรรรiรรiviรi๎Viร๎๎รร๎
iรL๎รร
provided in the Code Retrieval section of this manual.
๎vรร๎รรรLร>๎`ร๎ร๎ยฝรร๎๎รรi`ร๎๎รร๎
iรV๎`iร๎๎รร]รรรiร๎๎iร๎vรร๎
iร๎๎`iร
-i>รV๎
ร๎iร๎
๎`รรร๎รยซร๎}ร>๎รร๎
iรรi๎๎รiรV๎๎รร๎๎ยฐร๎ญ,iviรรร๎รร๎
iร
๎รร๎ร>๎`ร๎>๎ร>๎ร๎๎`iร-i>รV๎
ร๎iร๎
๎`รยฐยฎ
If you release the device key any time during the Direct Code
๎๎รรรรยซร๎Vi`รรi]รร๎
iร" U"๎๎ร๎iรรL๎๎๎๎รรv๎รรรร๎๎iร]ร>๎`ร
ร๎
iรยซร๎Viรรร๎รรiร๎รi`ยฐร/๎
iร๎>รรรยซร๎}ร>๎๎i`รV๎`iรร๎`iรรร๎
iร
device key is retained.
Test the remote with the device to make sure the device
๎iรร๎รรยซร๎}ร>๎๎i`รร๎ร๎
รร๎
iรV๎รรiVรรV๎`iรv๎รร๎>ร๎๎ร๎ร
vร๎Vร๎๎๎>๎๎รรยฐร๎vรร๎๎iรvi>รรรiรร`๎๎ยฝรรร๎ร๎]รรรรร>ร`๎vviรi๎รรV๎`iร
in the list.
4.ร 7๎
i๎รร๎รยฝรiรw๎๎ร๎
i`รi๎รiร๎๎}รร๎
iรwรi๎`๎}๎รรV๎`i]ร๎iiยซร
๎
๎๎`๎๎}ร`๎ร๎รร๎
iร`iร๎Viร๎iรร>๎`ร๎๎๎๎ร>รรร๎
iร" U"๎๎ร๎iรยฐร
ร ๎รรร๎
iร" U"๎๎ร๎iรร๎๎ยถร
YES: Youโre done! Youโve programmed this device key.
ร "]ร๎รรL๎๎๎๎i`รv๎รรรร๎๎iรร>๎`รรรร๎i`ร๎vv\รYou have
either entered a code number that is not in the code lists or
missed a step in the code entry procedure. Try step 3 again.
Manual Code Search
The Manual Code Search lets you go one-by-one through all
ร๎
iรV๎`iรรv๎รรร๎
iร`iร๎Viรร๎รยฝรiรรรร๎๎}รร๎รV๎๎รร๎๎ยฐร7๎
i๎รร๎รรw๎`ร
the one that operates your device, you can stop the search and
store that code.
TIPS:ร/๎
iร" U"๎๎ร๎iรรรiรรiรร>รร>๎ร๎๎`๎V>ร๎รร๎๎}๎
รร`รร๎๎}ร
programming, giving you feedback at each stage of the process.
Each device key is associated with a type of deviceโthe TV is
ยซรiรiรรร๎รรi>รV๎
รv๎รร/6ร]ร-๎/U๎๎๎U๎/๎รv๎รรร>รi๎๎๎รiรรiVi๎รiรร]ร
V>L๎iรL๎รiรร๎รร`๎}๎ร>๎ร/6รV๎๎รiรรiรร]ร๎6๎รv๎รร๎6๎รยซ๎>รiรร]ร
>๎`ร6๎,U๎18รv๎รร6๎,รร๎รร๎6,รยฐร/๎รยซร๎}ร>๎ร>ร`iร๎Viร๎iรรv๎รร
a different type of device, see the ๎๎
>๎}๎๎}ร>ร๎iรยฝรร๎iร๎Viร
Type section.
The Manual Code Search method may take a long time
because the remote searches through all of the codes in
๎รรร๎i๎๎รรร๎๎i๎Lร๎๎๎iยฐร๎vรร๎รรรLร>๎`ร๎รร๎๎รรi`ร๎๎รร๎
iร๎ร>๎`ร
๎๎`iรร๎รรร๎
iร๎๎`iร๎๎รรร]รwรรรรรรรรร๎
iร๎ร>๎`ร๎๎`iร-i>รV๎
ร๎รร
the Direct Code Entry method.
/๎รiร๎รรร๎ร๎
๎รรรร>ร๎๎}ร>ร๎iรรV๎`iร>รร>๎รรยซ๎๎๎รร๎๎รร๎
iร๎>๎ร>๎ร
๎๎`iร-i>รV๎
]รยซรiรรรร๎
iร๎"ร๎๎๎๎ร๎iรยฐ
1. Manually turn on the device you
want to control.
3.ร 7>๎รรร๎ร๎๎รร๎
iร" U"๎๎ร๎iรรV๎๎iรร๎๎ร>๎`รรร>รรร๎๎ยฐร/๎
i๎ร
release both keys.
4. Point the remote directly at the front panel of the device you
ร>๎รรร๎รV๎๎รร๎๎ยฐร*รiรรร" U"๎๎ร๎๎รร๎
iรรi๎๎รiร>๎`รร>๎รรรร
seconds. The remote is testing a single code for your device.
Did your device turn off?
YES: Press the STOP key to store
the code. Youโre done! Youโve
programmed this device key.
NO: *รiรรร" U"๎๎ร>}>๎๎ยฐร/๎
iร
remote tests the next code for
your device.
ร ๎iiยซรยซรiรร๎๎}ร" U"๎๎รiรiรรรรร
seconds until your device turns off.
7๎
i๎ร๎รร`๎iร]รยซรiรรร-/"*ยฐ
TIP: Because there are so many codes, you may have to press
ร๎
iร" U"๎๎ร๎iรร๎>๎รรร๎๎iรpยซ๎รร๎L๎รร๎
ร๎`รi`รร๎vรร๎๎iรยฐ
NOTES
Throughout the programming of each key, keep the remote
pointed at the IR sensor of the device you are programming
the remote to control.
Test the remote with the device to make sure the device
๎iรร๎รรยซร๎}ร>๎๎i`รร๎ร๎
รร๎
iรV๎รรiVรรV๎`iรv๎รร๎>ร๎๎ร๎ร
vร๎Vร๎๎๎>๎๎รรยฐร๎vรร๎๎iรvi>รรรiรร`๎๎ยฝรรร๎ร๎]รรรรร>ร`๎vviรi๎รร
V๎`iยฐร-iiรร๎
iรยบ/iรร๎๎}รร๎
iร๎๎`iรv๎รร๎>ร๎๎ร๎ร๎ร๎Vร๎๎๎>๎๎รรยปร
section below for more information.
During the Manual Code Search, the remote ignores
๎iรยซรiรรiรรร๎
>รร>รi๎ยฝรรยซ>รรร๎vรร๎
iรรi>รV๎
ยฐร
/๎
iรรi>รV๎
รร๎๎iรร๎รรร>vรiรรรร๎ร๎๎๎รรiรร๎ญร๎
iร" U"๎๎ร๎iร
blinks four times and turns off, and the last programmed
V๎`iรร๎`iรรร๎
>รร`iร๎Viร๎iรร๎รรรiร>๎๎i`ยฎยฐ
The " U"๎๎ร๎iร blinks four times and turns off when the
รi๎๎รiร๎
>รร}๎๎iรร๎
ร๎ร}๎
ร>๎๎รร๎
iรV๎`iรยฐร/๎
iรรi๎๎รiรiร๎รรรร๎
iร
๎>๎ร>๎ร๎๎`iร-i>รV๎
ยฐร๎vรร๎รรร`iร๎Viร๎
>ร๎ยฝรรรรร๎i`ร๎vvรรiร]รรรรร
a different search method.
Testing the Code for Maximum Functionality
1. Try a variety of the deviceโs functions with the remote. If
some features of your devices donโt work, go to the next
step to try a different code.
2. ร ,iยซi>รรร๎
iร๎>๎ร>๎ร๎๎`iร-i>รV๎
รvร๎๎รร๎
iรLi}๎๎๎๎๎}ยฐร7๎
i๎ร
the device turns off for the ๏ฌrst time, donโt press the STOP
key, which would store the same code. Instead, with the
unit now off, continue to press the " U"๎๎รkey repeatedly
until the unit turns back on.
3. Once the unit turns back on, you have found another code
that operates the device. Press the STOP key.
4. Test the keyโs functionality again by trying a variety of
functions. If the code controls the majority of the deviceโs
functions, programming is complete. If the code stored
does not give maximum functionality, try another code.
Code Retrieval
Once youโve programmed the remote to control your devices,
you may want to record the codes for future reference. If
you used the Direct Code Entry method, this is easy. Just
๏ฌnd the codes you entered and make a note of them in the
boxes below. If you used one of the Code Search methods to
program your remote or if you used the Direct Entry method
but donโt remember the code, you will need to retrieve each
deviceโs ๏ฌve-digit code. Retrieving the actual code and writing
it down will save you time if you ever need to program the
remote again (e.g., if programming is lost when you change
the batteries). If the codes are recorded, you can use the
Direct Entry method to reprogram your remote to control your
devices, which is quick and easy.
1. Press and hold the device
๎iรร๎ญ/6]ร-๎/U๎๎๎U๎/๎]ร๎6๎]ร
6๎,U๎18ยฎรร๎
๎รiรV๎`iรร๎รร
ร๎ร๎
รร๎รรiรร๎iรiยฐร/๎
iร" U"๎๎ร
๎iรรรรร๎รร๎๎ยฐร๎iiยซรยซรiรร๎๎}รร๎
iร
device key.
IMPORTANT
๎iV>รรiรร๎
๎รรรi๎๎รiรV๎๎รร๎๎รร๎๎รiรร๎
>๎ร๎๎iร`iร๎Vi]รร๎รร
๎รรรรwรรรรยบรi๎๎ยปรร๎
iรรi๎๎รiรร๎
๎V๎
ร`iร๎Viรร๎รรร๎ร๎
รร๎ร
operate. That means, if you wish to operate your TV, you
๎รรรรwรรรรยซรiรรรร๎
iร/6ร๎iรรร๎รยซรรรร๎
iรรi๎๎รiร๎๎รร๎
iร/6ร
Mode. The remote stays in that device mode until you press
>ร`๎vviรi๎รร`iร๎Viร๎iรยฐร๎๎รรiร>๎ยซ๎i]ร๎vรร๎รรรรi๎๎รiร๎รร๎๎ร/6ร
Mode and you want to operate the DVD player, you must
press the DVD key to change device modes.
Accessing Device Menus and Guides
Many devices use on-screen menus and guides to help you
๎>ร๎}>รiรร๎
ร๎ร}๎
ร>๎๎รร๎
i๎รรvi>รรรiรร>๎`รยซร๎}ร>๎๎๎๎}ยฐร7๎
๎๎iร
this remote may not access every menu or guide system
of every device model, it does offer some menu and guide
functionality.
To use a deviceโs on-screen menu or guide system, you ๏ฌrst
have to put the remote in Menu or Guide Mode.
1. Make sure your devices are turned on and your TV is set
ร๎รร๎
iรV๎รรiVรร`iร๎Viร๎๎ยซรรร๎ญรรiรร๎
iร๎ *1/ร๎iรรร๎รร๎}}๎iร
through inputs when in TV Mode.)
2. Press the device key whose menu you want to access.
{ยฐรร 1รiรร๎
iร6"๎ยณร๎ร>๎`ร๎๎ยณร๎ร๎iรรรร๎ร
navigate through the on-screen
menu system or guide. To select the
๎
๎}๎
๎๎}๎
รi`ร๎รi๎]รยซรiรรรร๎
iร"๎ร๎iรยฐ
TIP:ร๎vรร๎
iรรi๎๎รiร`๎iร๎ยฝรรรiรยซ๎๎`]ร
V๎
iV๎รร๎รรiiรร๎
>รรร๎
iร" U"๎๎ร๎iรร๎รร
รร๎๎๎รL๎๎๎๎๎๎}ยฐร/๎
iร" U"๎๎ร๎iรรร๎๎iรร
out after 20 seconds. If this happens,
๎รรรรยซรiรรรร๎
iร๎๎ 1ร๎iรร>}>๎๎]ร>๎`ร
then retry your selection.
Exiting Menu/Guide Mode
The remote automatically times out of Menu or Guide Mode
after 20 seconds of inactivity (no keys being pressed). At that
time, the remote clears the displayed menu from the TV.
If you want to exit the Menu Mode yourself, press the
V๎รรiรยซ๎๎`๎๎}ร`iร๎Viร๎iรร๎๎รร๎
iรรi๎๎รiร๎ญ/6]ร-๎/U๎๎๎U๎/๎]ร
๎6๎]ร6๎,U๎18ยฎยฐร/๎
iร" U"๎๎ร๎iรรรรร๎รร๎vvยฐ
Problem: The remote does not operate your device.
Uรร ๎>๎iรรรรiรร๎
iรรi๎๎รiร๎รร๎๎รร๎
iรV๎รรiVรร๎๎`iรLรรยซรiรร๎๎}รร๎
iร
V๎รรiรยซ๎๎`๎๎}ร`iร๎Viร๎iรร๎ญ/6]ร-๎/U๎๎๎U๎/๎]ร๎6๎]ร6๎,U๎18ยฎยฐร
This tells the remote which device to operate.
Uรร ,i๎๎รiร>๎รร๎Lรร>V๎iรรLiรรii๎รร๎
iรรi๎๎รiร>๎`รร๎
iร`iร๎Viยฐร๎>๎iร
sure youโre aiming the remote at the deviceโs IR sensor.
Uรร ๎>๎iรรรรiรร๎
iรL>รรiร๎iรร>รiรvรiร๎
ร>๎`ร>รiรยซร๎ยซiร๎รร๎๎รร>๎๎i`ยฐร
Replace the batteries with two new AA batteries, if necessary
(see the Battery Installation section).
Problem: The remote canโt be programmed to operate your
device.
Uรร ๎vรร๎รร>รiรรiรร๎๎}รร๎
iรรi๎๎รiรร๎
๎๎iรยซร๎}ร>๎๎๎๎}ร๎ร]รร๎รร๎>รรLiร
too far away from the device or at a wrong angle. There must be
an unobstructed path between the remote and the IR sensor on
the device. Move closer and make sure you point the remote at
the device youโre trying to control.
Uรร ๎vรร๎รยฝรiรรร๎๎}รร๎
iร๎๎รiVรร๎๎รรรรยซร๎}ร>๎๎๎๎}ร๎iร๎
๎`รร๎รi๎รiรร
the codes for your brand and the unit is still not functioning
properly, try the auto, brand, or manual search method.
Uรร /๎รV๎๎รร๎๎รV๎๎L๎รร๎๎รร]ร๎๎๎iร/6ร6๎,รร๎รร/6ร๎6๎ร]รร๎รร๎รรรร
program the individual corresponding device keys to control
each part of the combo unit. Once programmed successfully, the
/6ร๎iรรV๎๎รร๎๎รรร๎
iร/6รvร๎Vร๎๎๎ร]ร>๎`รร๎
iร6๎,U๎18ร๎รร๎6๎ร๎iรร
controls the VCR or DVD functions.
Uรร ๎>๎iรรรรiรร๎
iรL>รรiร๎iรร>รiรvรiร๎
ร>๎`ร>รiรยซร๎ยซiร๎รร๎๎รร>๎๎i`ยฐ
Problem: The remote doesnโt perform commands properly.
Uรร ๎>๎iรรรรiรร๎
iรรi๎๎รiร๎รร๎๎รร๎
iรV๎รรiVรร๎๎`iรLรรยซรiรร๎๎}รร๎
iร
V๎รรiรยซ๎๎`๎๎}ร`iร๎Viร๎iรร๎ญ/6]ร-๎/U๎๎๎U๎/๎]ร๎6๎]ร6๎,U๎18ยฎยฐร
This tells the remote which device to operate.
Uรร ๎>๎iรรรรiร`iร๎Viร๎รรรi>`รร๎ญv๎รรiร>๎ยซ๎i]รร๎
iร๎6๎รยซ๎>รiรร๎
>รร>ร
disc loaded).
Uรร 9๎รร๎>รร๎
>รi รยซรiร รi`ร> ๎ร๎๎ร >๎๎`ร ๎iรรv ๎รรร๎
iร๎๎` iรร๎
i รรi๎๎ รiร๎ร ร๎๎ยฐ
Uรร ๎vรร๎รยฝรiรรรร๎๎}รร๎รi๎รiรร>รV๎
>๎๎i๎ร๎ร๎Liรร`๎รiVร๎ร]รรรรรยซรiรร๎๎}ร
ร๎
iร"๎ร๎iรร>vรiรรi๎รiร๎๎}รร๎
iรV๎
>๎๎i๎ร๎ร๎Liรร>รรร๎
๎รร๎รร>ร
requirement of certain models and brands.
Uรร /๎
iรiร๎รร>รยซ๎รร๎L๎๎๎รรรร๎
>รร>รยซร๎}ร>๎๎i`รV๎`iร๎>รร๎๎๎รรLiร
able to control some of your device features (for example, only
turns a device on and off). To con๏ฌrm that the device key is
programmed with the correct code for maximum functionality,
test the device. Attempt to control a variety of the deviceโs
functions with the remote. If some of the features of your
devices donโt work, try programming the remote with a different
code in the list using the Direct Code Entry Method, until you
๏ฌnd the code that allows the remote to control the majority of
your deviceโs functions. Different codes can provide different
levels of functionality.
*ร๎L๎i๎\ร/๎
iร" U"๎๎ร๎iรร`๎iรร๎๎รร๎๎}๎
รรร๎
i๎รร๎รรยซรiรรร>ร๎iรยฐ
Uรร 9๎รร๎>รร๎
>รiรยซรiรรi`ร>๎ร๎๎ร>๎๎`ร๎iรรv๎รรร๎
iร๎๎`iรร๎
iรรi๎๎รiร๎รร
in.
Uร ๎>๎iรรรรiรร๎
iรรi๎๎รiร๎รร๎๎รร๎
iรV๎รรiVรร๎๎`iรLรรยซรiรร๎๎}รร๎
iร
V๎รรiรยซ๎๎`๎๎}ร`iร๎Viร๎iรร๎ญ/6]ร-๎/U๎๎๎U๎/๎]ร๎6๎]ร6๎,U๎18ยฎยฐร
This tells the remote which device to operate.
Uรร ๎>๎iรรรรiรร๎
iรL>รรiร๎iรร>รiรvรiร๎
ร>๎`ร>รiรยซร๎ยซiร๎รร๎๎รร>๎๎i`ยฐร
Replace the batteries with two new AA batteries, if necessary
(see the Battery Installation section).
*ร๎L๎i๎\ร/๎
iรรi๎๎รiรร๎๎๎ร๎๎รรV๎
>๎}iรV๎
>๎๎i๎รร๎๎ร`iร๎Viยฐ
Uร ๎>๎iรรรรiรร๎
iรรi๎๎รiร๎รร๎๎รร๎
iรV๎รรiVรร๎๎`iรLรรยซรiรร๎๎}รร๎
iร
V๎รรiรยซ๎๎`๎๎}ร`iร๎Viร๎iรร๎ญ/6]ร-๎/U๎๎๎U๎/๎]ร๎6๎]ร6๎,U๎18ยฎยฐร
This tells the remote which device to operate.
Uรร *รiรรรร๎
iร"๎ร๎iรร>vรiรรร๎รรi๎รiรร>รV๎
>๎๎i๎ร๎ร๎Liรยฐ
Uรร ,i๎๎รiร>๎รร๎Lรร>V๎iรรLiรรii๎รร๎
iรรi๎๎รiร>๎`รร๎
iร`iร๎Viยฐร๎>๎iร
sure to aim the remote at the IR sensor on the device.
Problem: The deviceโs menu does not appear on the TV screen.
Uรร ๎>๎iรรรรiรร๎รร๎
>รiรV๎๎๎iVรi`รร๎
iร`iร๎Viรร๎รร๎รรร/6รยซร๎ยซiร๎รร>๎`ร
selected the correct input. (See your devicesโ Ownerโs Manuals for
proper connection procedures.)
Uร ๎>๎iรรรรiรร๎
iรรi๎๎รiร๎รร๎๎รร๎
iรV๎รรiVรร๎๎`iรLรรยซรiรร๎๎}รร๎
iร
V๎รรiรยซ๎๎`๎๎}ร`iร๎Viร๎iรร๎ญ/6]ร-๎/U๎๎๎U๎/๎]ร๎6๎]ร6๎,U๎18ยฎยฐร
This tells the remote which device to operate.
Uรร ๎i๎รร>VViรรร๎ร๎ยฝรรรรยซยซ๎รรi`รv๎รร>๎๎รLร>๎`รยฐร9๎รร๎>รร๎ii`รร๎รรรiร
your original remote control to access menu functions for some
devices.
๎๎รร๎๎รiร๎๎v๎ร๎>ร๎๎๎]รยซ๎i>รiรร๎ร๎รรรรรยฐรV>>VViรร๎ร๎iรยฐV๎๎
Consumer Help Line: 1-800-420-7968
Audiovox Electronics Corporation (the โCompanyโ) warrants to you the
original retail purchaser of this product that should it, under normal use
and conditions, be proven defective in material or workmanship during
its lifetime while you own it, such defect(s) will be repaired or replaced
(at the Companyโs option) without charge for parts and repair labor. To
๎Lร>๎๎รรiยซ>๎รร๎รรรiยซ๎>Vi๎i๎รรร๎ร๎
๎๎รร๎
iรรiร๎รร๎vรร๎
๎รร7>รร>๎รร]รร๎
iรยซร๎`รVรร
is to be delivered with proof of warranty coverage (e.g. dated bill of sale),
speci๏ฌcation of defect(s), transportation prepaid, to the Company at the
address shown below.
/๎
๎รร7>รร>๎รรร`๎iรร๎๎รรV๎รiรรยซร๎`รVรรยซรรV๎
>รi`]รรiรร๎Vi`ร๎รรรรi`ร๎รรร๎`iร
ร๎
iร1๎๎รi`ร-ร>รiรร๎รร๎>๎>`>ยฐร/๎
๎รร7>รร>๎รรร๎รร๎๎รรรร>๎รviร>L๎iร>๎`ร`๎iรร
not extend to costs incurred for installation, removal or reinstallation of
ร๎
iรยซร๎`รVรยฐร/๎
๎รร7>รร>๎รรร`๎iรร๎๎รร>ยซยซ๎รร๎vร๎๎รร๎
iร๎๎๎ยซ>๎รยฝรร๎ยซ๎๎๎๎๎]ร
the product has been damaged through alteration, improper installation,
mishandling, misuse, neglect, accident, or the simultaneous use of different
battery types (e.g. alkaline, standard or rechargeable).
/๎๎ร๎8/๎ /ร"๎ร/๎๎ร๎"๎*๎ 9ยฝ-ร๎๎๎๎๎๎๎/9ร1 ๎๎,ร/๎๎-ร7๎,,๎ /9ร๎-ร
LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO
๎6๎ /]ร-๎๎๎๎ร/๎๎ร๎"๎*๎ 9ยฝ-ร๎๎๎๎๎๎๎/9ร๎8๎๎๎๎ร/๎๎ร*1,๎๎๎-๎ร*,๎๎๎ร
*๎๎๎ร๎9ร*1,๎๎๎-๎,ร๎",ร/๎๎ร*,"๎1๎/ยฐ
/๎
๎รร7>รร>๎รรร๎รร๎๎ร๎๎iรร๎vร>๎๎ร๎ร๎
iรรiรยซรiรรรร>รร>๎ร๎iรร๎รร๎๎>L๎๎๎ร๎iรยฐร๎ 9ร
๎๎*๎๎๎๎ร7๎,,๎ /๎๎-]ร๎ ๎๎1๎๎ ๎ร๎ 9ร๎๎*๎๎๎๎ร7๎,,๎ /9ร"๎ร
๎๎,๎๎๎ /๎๎๎๎๎/9ร",ร๎๎/ ๎--ร๎",ร๎ร*๎,/๎๎1๎๎,ร*1,*"-๎ร-๎๎๎๎ร
๎๎ร๎๎๎๎/๎๎ร/"ร๎1,๎/๎" ร"๎ร/๎๎-ร7๎,,๎ /9ยฐร๎ ร "ร๎๎-๎ร-๎๎๎๎ร
/๎๎ร๎"๎*๎ 9ร๎๎ร๎๎๎๎๎๎ร๎",ร๎ 9ร๎" -๎+1๎ /๎๎๎ร",ร๎ ๎๎๎๎ /๎๎ร
๎๎๎๎๎๎-ร7๎๎/-"๎6๎,ยฐร ๎รยซiรร๎๎ร๎รรรiยซรiรi๎ร>ร๎รiร๎รร>รร๎
๎ร๎รขi`ร
to assume for the Company any liability other than expressed herein in
connection with the sale of this product.
Some states/provinces do not allow limitations on how long an implied
warranty lasts or the exclusion or limitation of incidental or consequential
damage so the above limitations or exclusions may not apply to you. This
7>รร>๎รรร}๎รiรรร๎รรรยซiV๎wVร๎i}>๎รร๎}๎
รรร>๎`รร๎รร๎>รร>๎ร๎ร๎
>รiร๎ร๎
iรรร๎}๎
รร]ร
which vary from state/province to state/province.
U.S.A.: Audiovox Electronics Corporation, 150 Marcus Blvd., Hauppauge,
New York 11788
CANADA: ๎ร`๎๎ร๎รร,iรรร๎ร๎i๎รiร]รVร๎ร๎i๎V๎]รรรnxร๎i๎๎i`รร,๎>`]ร
1๎๎รรร]ร๎๎๎รรยฃร]ร๎๎รร๎รร>ร}>]ร"๎ร>ร๎๎รร๎x/รร๎x
Trademark(s) ยฎ Registered
,๎,{ยฃรร1-รรคx
ยฉ2010 Audiovox Accessories Corporation
111 Congressional Blvd., Suite 350
Carmel, IN 46032
Step 1: Install your batteries
Step 2: Program your remote
Tour of the Remote
Advanced Functions
Troubleshooting
Limited Lifetime Warranty
3
DVD CODE
5
SATโขCBLโขDTC CODE
1
TV CODE
SAT CABLE DTV CONVERTER
รยฐรร /๎ร>VViรรร๎i๎รร]รยซรiรรรร๎
iร๎๎ 1ร๎iรยฐร/๎ร>VViรรร}ร๎`iร]ร
ยซรiรรรร๎
iร๎1๎๎๎ร๎iรยฐร/๎
iร" U"๎๎ร๎iรรรร>รรรรL๎๎๎๎๎๎}]ร
indicating you are in Menu or Guide Mode.
" U"๎๎ร๎iร
2.ร *รiรรร>๎`ร๎
๎๎`รร๎
iร`iร๎Viร๎iรรร๎รรร>๎รรร๎รยซร๎}ร>๎ยฐร7๎
๎๎iร
youโre holding down the device key, use your other hand
ร๎รยซรiรรร>๎`ร๎
๎๎`รร๎
iรรi๎๎รiยฝรร" U"๎๎ร๎iรร>รรร๎
iรร>๎iร
time.
Note: All TV codes begin with the number 1; all VCR and DVR
codes begin with the number 2; all DVDs, the number 3; and
>๎๎รร>รi๎๎๎รiรรiVi๎รiรร]รV>L๎iรL๎รiรร>๎`ร`๎}๎ร>๎ร/6รV๎๎รiรรiรร]ร
the number 5.
5. Repeat step 4 until you have retrieved all ๏ฌve numbers in
ร๎
iรV๎`iยฐร๎vรiรรร๎
iรwvร๎
ร๎ร๎Liรร๎รรรiรร๎iรi`]รร๎
iร" U"๎๎ร
key blinks brie๏ฌy, then turns off.
TIP:ร/๎รiร๎รรร๎
iร๎๎`iร,iรร๎iร>๎ร๎๎`iร>รร>๎รรร๎๎i]รยซรiรรรร๎
iร
๎"ร๎๎๎๎ร๎iรยฐ
Note: If you press an invalid key during the Code Retrieval
process, the remote will not respond. If you do not press a
ร>๎๎`ร๎๎`iร,iรร๎iร>๎ร๎iรร๎ญ/6]ร-๎/U๎๎๎U๎/๎]ร๎6๎]ร6๎,U๎18]ร
๎ ๎"]ร๎"ร๎๎๎๎ยฎ]ร๎๎`iร,iรร๎iร>๎รร๎๎iรร๎รรร>vรiรรยฃxรรiV๎๎`รยฐร
/๎
iร" U"๎๎ร๎iรรL๎๎๎๎รรv๎รรรร๎๎iร]ร>๎`รร๎
i๎รรรร๎รร๎vvยฐ
๎"ร๎๎๎๎ exits remote programming; it also performs the
same functions as on your original remotes.
Theร๎ *1/ and pร๎ญ`>ร๎
ยฎรkey has three functions: (1) it toggles
through all the video sources connected to your TV; (2) when
the remote is in VCR mode, this button toggles between VCR
and the TV input; (3) when youโre entering digital channel
numbers directly, this button lets you separate the main
channel number from the sub-channel number (such as 59.1).
๎>V๎๎๎}๎
ร๎๎}
Backlight illumination helps you see the remote control keys
better in the dark. You can turn backlight illumination on or off
by pressing the backlight key ( ). Backlighting stays on as
long as keys are being pressed and turns off six seconds after
the last keypress. Once the backlight time has timed out, any
keypress will reactivate it. If the backlight illumination is on,
and you press the backlight key, the backlight turns off.
รยฐรร 7๎
๎๎iร๎
๎๎`๎๎}รร๎
iร`iร๎Viร๎iรร`๎ร๎]รยซรiรรร>๎`ร๎
๎๎`รร๎
iร
๎ ๎"ร๎iรยฐร/๎
iร" U"๎๎ร๎iรรรรร๎รร๎vvยฐร๎vรiรร๎
๎๎`๎๎}ร`๎ร๎ร
L๎ร๎
ร๎iรรรv๎รรร๎
รiiรรiV๎๎`ร]รร๎
iร" U"๎๎ร๎iรรรรร๎รรL>V๎ร
on.
รยฐรร ,i๎i>รiรL๎ร๎
ร๎iรรยฐร/๎
iร" U"๎๎ร๎iรรรi๎>๎๎รร๎๎ยฐ
4. Starting with the number 1 key, press and release each
number key on the keypad in the following order: 1-9, then
รคยฐร/๎
iร๎ร๎Liรรร๎
>รรV>รรiรรร๎
iร" U"๎๎ร๎iรรร๎รL๎๎๎๎ร๎รรร๎
iร
๏ฌrst number of the code. As you ๏ฌnd each number of the
code, write it down for future reference.
TIP: Each device key is associated with a type of deviceโthe
/6ร๎รรยซรiรiรรร๎รรi>รV๎
รv๎รร/6ร]ร-๎/U๎๎๎U๎/๎รv๎รรร>รi๎๎๎รiร
รiVi๎รiรร]รV>L๎iรL๎รiรร๎รร`๎}๎ร>๎ร/6รV๎๎รiรรiรร]ร๎6๎รv๎รร๎6๎ร
ยซ๎>รiรร]ร>๎`ร6๎,U๎18รv๎รร6๎,รร>๎`ร๎6,รยฐร/๎รยซร๎}ร>๎ร>ร
device key for a different type of device, see the Changing a
๎iรยฝรร๎iร๎Viร/รยซi section.
/๎
iร" U"๎๎ร๎iรรรiรรiรร>รร>๎ร๎๎`๎V>ร๎รร๎๎}๎
รร`รร๎๎}ร
programming, giving you feedback at each stage of the
process.
Actual model may vary
from illustration
TIPS: Each device key is associated with a type of deviceโ
ร๎
iร/6ร๎รรยซรiรiรรร๎รรi>รV๎
รv๎รร/6ร]ร-๎/U๎๎๎U๎/๎รv๎รรร>รi๎๎๎รiร
รiVi๎รiรร]รV>L๎iรL๎รiรร๎รร`๎}๎ร>๎ร/6รV๎๎รiรรiรร]ร๎6๎รv๎รร
๎6๎รยซ๎>รiรร]ร>๎`ร6๎,U๎18รv๎รร6๎,รร๎รร๎6,รยฐร/๎รยซร๎}ร>๎ร
a device key for a different type of device, see the Changing
>ร๎iรยฝรร๎iร๎Viร/รยซi section.
/๎รiร๎รรร๎ร๎
๎รรรร>ร๎๎}ร>ร๎iรรV๎`iร>รร>๎รรยซ๎๎๎รร๎๎รร๎
iร๎รร๎ร
Code Search, press the ๎"ร๎๎๎๎ key.
Changing A Keyโs Device Type
Each device key is associated with a type of deviceโthe TV is
ยซรiรiรรร๎รรi>รV๎
รv๎รร/6ร]ร-๎/U๎๎๎U๎/๎รv๎รรร>รi๎๎๎รiรรiVi๎รiรร]ร
cable boxes or digital TV converters, DVD for DVD players, and
6๎,U๎18รv๎รร6๎,รร๎รร๎6,รยฐร/๎รยซร๎}ร>๎รร๎
iรiร๎iรรรร๎รV๎๎รร๎๎ร
a different kind of device, you have to reassign them ๏ฌrst.
,i>รร๎}๎๎๎}รร๎
iร6๎,U๎18ร๎iรร/๎ร๎๎๎รร๎๎ร"ร๎
iรร
Devices
/๎
iร6๎,U๎18ร๎iรร`iv>ร๎รรรร๎รV๎๎รร๎๎ร>ร6๎,ร๎รร๎6,ยฐร๎vรร๎รรร>๎รร
ร๎
iร6๎,U๎18ร๎iรรร๎รV๎๎รร๎๎ร>ร`๎vviรi๎รร`iร๎Viร๎ญ>๎ร>``๎ร๎๎๎>๎ร
TV, DVD, satellite, cable box or digital TV converter, for
example), you must reassign it.
ยฃยฐรร *รiรรร>๎`ร๎
๎๎`รร๎
iร6๎,U๎18ร๎iรยฐร/๎
iร" U"๎๎ร๎iรรรรร๎รร๎๎ยฐ
รยฐรร 7๎
๎๎iร๎
๎๎`๎๎}ร`๎ร๎รร๎
iร6๎,U๎18ร๎iร]รยซรiรรร>๎`รรi๎i>รiรร๎
iร
number key on the keypad for the device you wish to control
๎ญรiiรร๎
iรV๎
>รรรLi๎๎รยฎยฐร/๎
iร" U"๎๎ร๎iรรรรร๎รร๎vvยฐ
รยฐรร ,i๎i>รiรร๎
iร6๎,U๎18ร๎iรยฐร/๎
iร" U"๎๎ร๎iรรL๎๎๎๎รรv๎รรร
ร๎๎iรร>๎`รร๎
i๎รรรร๎รร๎vvยฐร/๎
iร6๎,U๎18ร๎iรร๎รร๎๎รรรiรรร๎ร
control the device type you selected.
{ยฐรร ๎๎๎๎๎รรร๎
iร`๎รiVร๎๎๎รร๎๎รร๎
iร>รร๎]รLร>๎`]ร`๎รiVรรi๎รรร]ร๎รร
๎>๎ร>๎รV๎`iรรi>รV๎
รร๎รยซร๎}ร>๎รร๎
iร6๎,U๎18ร๎iรยฐร
6๎,U๎18ร๎๎9ร๎" /,"๎-\
Additional TV press 1
VCR or DVR press 2
Additional DVD press 3
Additional satellite, cable box or
digital TV converter
press 5
VCRโขAUX CODE
DVR/VCR DVD TV -๎/U๎๎๎U๎/๎
In most cases, the keys on
this remote perform the same
functions as the keys on your
original remotes once youโve
programmed this remote to
operate your components.
Many keys on this remote
have other functions as well.
Illuminated " U"๎๎ key
serves as an indicator light to
provide feedback.
Device keys (TV,
-๎/U๎๎๎U๎/๎, ๎6๎,
6๎,U๎18) put the remote in
the right mode to control your
device.
Backlight key (
) turns
backlighting on/off.
๎1๎๎๎ and ๎๎ 1 put the
remote in menu/guide mode,
which makes the ๎๎ร6"๎ร
keys serve as arrow keys;
they also access the same
features as the keys on your
original remotes.
๎๎ and 6"๎ keys have dual
functions: they can act as
navigation keys in menu
systems as well as channel
and volume controllers
outside the menus. The
CH keys also provide skip
forward and skip back control
for DVD players and DVRs
that support this functionality.
Battery Saver
Your universal remote control saves battery power by
automatically turning off if any key is pressed for more than
60 seconds. This saves your battery life should your remote
get stuck in a place where the keys remain depressed, such as
between sofa cushions.
Universal Remote Control
Ownerโs Manual
RCR412BR / RCR412SR / RCR412SIR
Manual del Propietario (parte posterior)
Care and Maintenance
Uรร๎iiยซรร๎
iรรi๎๎รiร`รรยฐร๎vร๎รร}iรรรรiร]รร๎ยซiร๎รร`รรร๎๎๎i`๎>รi๎รยฐ
Uรร1รiร>๎`รรร๎รiรร๎
iรรi๎๎รiร๎๎๎รร๎๎ร๎๎ร๎>๎รรi๎ยซiร>รรรiร
environments.
Uรร๎>๎`๎iรร๎
iรรi๎๎รiร}i๎ร๎รร>๎`รV>รivร๎๎รยฐร๎๎๎ยฝรร`ร๎ยซร๎รยฐ
Uรร๎iiยซรร๎
iรรi๎๎รiร>ร>รรvร๎๎ร`รรรร>๎`ร`๎รรยฐ
Uรร7๎ยซiรร๎
iรรi๎๎รiรร๎ร๎
ร>ร`>๎ยซรV๎๎ร๎
ร๎VV>ร๎๎๎>๎๎รรร๎ร๎iiยซร๎รร
looking new.
Uรร๎๎`๎vร๎๎}ร๎รรร>๎ยซiร๎๎}รร๎ร๎
รร๎
iรรi๎๎รiยฝรร๎๎รiร๎>๎ร`iร๎ViรรV>๎ร
cause malfunction and invalidate its warranty.
SAVE THIS MANUAL AND THE CODE LISTS!
Remote controls can sometimes lose their programming
when you change the batteries. Make sure you keep the
manual and code lists in a safe place so that you can
reprogram the remote if you need to.
Tip: This remote is already programmed to operate
most RCA-branded TVs, VCRs, DVD players and satellite
receivers. Just press the corresponding keyโDVD for
>ร๎6๎รยซ๎>รiร]ร/6รv๎รร>รรi๎iร๎ร๎๎๎]ร-๎/U๎๎๎U๎/๎รv๎รร>ร
ร>รi๎๎๎รiรรiVi๎รiร]ร6๎,U๎18รv๎รร>ร6๎,ยฐ
Your universal remote requires two AA alkaline batteries
(batteries may or may not be included, depending on model).
To install the batteries:
1. Remove the battery compartment
cover.
2. Insert the batteries, matching the
batteries to the (+) and (โ) marks
inside the battery compartment.
3. Push the battery cover back into place.
Battery Precautions:
Uร๎๎ร๎๎รร๎๎รร๎๎`ร>๎`ร๎iรรL>รรiร๎iรยฐร
Uร๎๎ร๎๎รร๎๎รร>๎๎>๎๎๎i]รรร>๎`>ร`ร๎ญV>รL๎๎๎รข๎๎Vยฎร๎รร
รiV๎
>ร}i>L๎iร๎ญ๎๎V๎i๎๎V>`๎๎ร๎ยฎรL>รรiร๎iรยฐ
Uร๎๎ร>รรรรi๎๎รiร๎๎`]รรi>๎ร๎รรร๎ร๎๎๎รรรL>รรiร๎iรรยซร๎๎ยซร๎รร
>๎`รรiVรV๎iร๎รร`๎รยซ๎รiร๎vรร๎
i๎ร๎๎ร>VV๎ร`>๎Viรร๎ร๎
ร๎๎V>๎ร
and National Regulations.
To use this universal remote with your home entertainment
system, ๏ฌrst you need to program it to control your devices.
There are four ways you can program the universal remote to
operate your devices:
Uร /๎
iรAuto Code Search goes automatically through all the
codes for the device youโre trying to control. Itโs the easiest
method, but it can sometimes take longer than some of the
other programming methods.
Uรร /๎
iรBrand Code Search searches through the codes for
select brands of devices. Itโs not as easy as the auto code
search, but it can be faster.
Uรร /๎
iรDirect Code Entry lets you enter a code from the
accompanying code list for your brand of device. Itโs not as
easy as the other methods, but itโs potentially the fastest
method.
Uรร /๎
iรManual Code Search lets you manually go through
all the codes for the device youโre trying to control.
Testing the Code for Maximum Functionality
1. Try a variety of the deviceโs functions with the remote. If
some device features donโt work, go to next step to try a
different code.
2. Repeat the Auto Code Search Method from the beginning.
7๎
i๎รร๎รรร`iร๎Viรรรร๎รร๎vv]ร`๎ร๎๎รรรร๎ยซรรi>รV๎
๎๎}ยฐร
Instead, with the unit now off, continue to press the PLAY
key every 5 seconds until the unit turns back on.
3. Once the unit turns back on, press the REVERSE key on the
remote every 2 seconds until your device turns off again.
7๎
i๎รร๎รรร`iร๎Viรรรร๎รร๎vvร>}>๎๎]รยซรiรรรร๎
iร-/"*ร๎iรยฐ
4. Test the keyโs functionality again by attempting to control
a variety of the deviceโs functions. If the code that has
been stored controls the majority of the deviceโs functions,
programming is complete. If the code stored does not give
maximum functionality, try another code.
Auto Code Search
The Auto Code Search goes automatically through all the
V๎`iรรv๎รรร๎
iร`iร๎Viรร๎รยฝรiรรรร๎๎}รร๎รV๎๎รร๎๎ยฐร7๎
i๎รร๎รรw๎`ร
the one that operates your device, you can stop the search and
store that code.
1. Manually turn on the device you
want to control.
2.ร *รiรรร>๎`ร๎
๎๎`รร๎
iร`iร๎Viร๎iรรร๎รรร>๎รรร๎รยซร๎}ร>๎ยฐร7๎
๎๎iร
youโre holding down the device key, use your other hand
to press and hold the remoteโs " U"๎๎รkey at the same
time.
3.ร 7>๎รรร๎ร๎๎รร๎
iร" U"๎๎ร๎iร comes on and stays on. Then
release both keys.
4. Point the remote directly at the
front panel of the device you
want to control. Press PLAY on
the remote and wait 5 seconds.
The remote is testing a batch of
10 codes on your device.
Did your device turn off?
YES: Go to step 5.
NO: Press PLAY again. The remote tests the next batch of
10 codes.
ร ๎iiยซรยซรiรร๎๎}ร*๎๎9รiรiรรรxรรiV๎๎`รรร๎ร๎๎รร๎รรร`iร๎Viร
turns off.
5. 7๎
i๎รร๎รรร`iร๎Viรรรร๎รร๎vv]รยซรiรรร
the REVERSE key on the remote
and wait at least 2 seconds.
The remote tries the last of the
previous ten codes.
Did your device turn on?
YES: Press the STOP key. Youโre
done! Youโve programmed this
device key.
NO: Press REVERSE again. The remote tests the next
code in the batch.
ร ๎iiยซรยซรiรร๎๎}ร,๎6๎,-๎รiรiรรรรรรiV๎๎`รรร๎ร๎๎รร๎รรร`iร๎Viร
รรร๎รรL>V๎ร๎๎ยฐร7๎
i๎ร๎รร`๎iร]รยซรiรรร-/"*ยฐ
Note: If you accidentally press the REVERSE key after your
device turns on, press the FORWARD key. Then, wait two
seconds to see if your device turns off again.
NOTES
Throughout the programming of each key, be sure to keep
the remote pointed at the IR sensor of the device you are
currently programming the remote to control.
Test the remote with the device to make sure the
device key is programmed with the correct code for
๎>ร๎๎ร๎รvร๎Vร๎๎๎>๎๎รรยฐร๎vรร๎๎iรvi>รรรiรร`๎๎ยฝรรร๎ร๎]รรรรร
>ร`๎vviรi๎รรV๎`iยฐร-iiรร๎
iรยบ/iรร๎๎}รร๎
iร๎๎`iรv๎รร๎>ร๎๎ร๎ร
Functionalityโ section below for more information.
During the Auto Code Search, the remote ignores
๎iรยซรiรรiรรร๎
>รร>รi๎ยฝรรยซ>รรร๎vรร๎
iรรi>รV๎
ยฐร
/๎
iรรi>รV๎
รร๎๎iรร๎รรร>vรiรรรร๎ร๎๎๎รรiรร๎ญร๎
iร" U"๎๎ร๎iรร
blinks four times and turns off, and the last programmed
V๎`iรร๎`iรรร๎
>รร`iร๎Viร๎iรร๎รรรiร>๎๎i`ยฎยฐ
/๎
iร" U"๎๎ร๎iรรL๎๎๎๎รรv๎รรรร๎๎iรร>๎`รรรร๎รร๎vvรร๎
i๎รร๎
iร
รi๎๎รiร๎
>รร}๎๎iรร๎
ร๎ร}๎
ร>๎๎รร๎
iรV๎`iรยฐร/๎
iรรi๎๎รiรiร๎รรร
ร๎
iร๎รร๎ร๎๎`iร-i>รV๎
ยฐร๎vรร๎รรร`iร๎Viร๎
>ร๎ยฝรรรรร๎i`ร๎vvรรiร]ร
try a different search method.
Testing the Code for Maximum Functionality
1. Try a variety of the deviceโs functions with the remote. If
some device features donโt work, go to the next step to try
a different code.
2. ร ,iยซi>รรร๎
iร๎ร>๎`ร๎๎`iร-i>รV๎
รvร๎๎รร๎
iรLi}๎๎๎๎๎}ยฐร7๎
i๎ร
the device turns off for the ๏ฌrst time, donโt press the STOP
key, which would store the same code. Instead, with the
unit now off, continue to press the " U"๎๎ key repeatedly
until the unit turns back on.
3. Once the unit turns back on, you have found another code
that operates the device. Press the STOP key.
4. Test the keyโs functionality again by attempting to control
a variety of the deviceโs functions. If the code that has
been stored controls the majority of the deviceโs functions,
programming is complete. If the code stored does not give
maximum functionality, try another code.
Brand Code Search
The Brand Code Search goes through only the codes for one of
the select brands listed in the accompanying code list. If your
brand of device is listed, this search can be very quick and easy.
TIPS: Each device key is associated with a type of deviceโ
ร๎
iร/6ร๎รรยซรiรiรรร๎รรi>รV๎
รv๎รร/6ร]ร-๎/U๎๎๎U๎/๎รv๎รรร>รi๎๎๎รiร
รiVi๎รiรร]รV>L๎iรL๎รiรร๎รร`๎}๎ร>๎ร/6รV๎๎รiรรiรร]ร๎6๎รv๎รร
๎6๎รยซ๎>รiรร]ร>๎`ร6๎,U๎18รv๎รร6๎,รร๎รร๎6,รยฐร/๎รยซร๎}ร>๎ร
a device key for a different type of device, see the Changing
>ร๎iรยฝรร๎iร๎Viร/รยซi section.
/๎
iร" U"๎๎ร๎iรรรiรรiรร>รร>๎ร๎๎`๎V>ร๎รร๎๎}๎
รร`รร๎๎}ร
programming, giving you feedback at each stage of the
process.
/๎รiร๎รรร๎ร๎
๎รรรร>ร๎๎}ร>ร๎iรรV๎`iร>รร>๎รรยซ๎๎๎รร๎๎รร๎
iร๎ร>๎`ร
Code Search, press the ๎"ร๎๎๎๎ key.
1. Manually turn on the device you
want to control.
3.ร *รiรรร>๎`ร๎
๎๎`รร๎
iร`iร๎Viร๎iรรร๎รรร>๎รรร๎รยซร๎}ร>๎ยฐร7๎
๎๎iร
youโre holding down the device key, use your other hand
ร๎รยซรiรรร>๎`ร๎
๎๎`รร๎
iรรi๎๎รiยฝรร" U"๎๎ร๎iรร>รรร๎
iรร>๎iร
time.
4.ร 7>๎รรร๎ร๎๎รร๎
iร" U"๎๎ร๎iรรV๎๎iรร๎๎ร>๎`รรร>รรร๎๎ยฐร/๎
i๎ร
release both keys.
6. Point the remote directly at the
front panel of the device you want
ร๎รV๎๎รร๎๎ยฐร*รiรรร" U"๎๎ร๎๎รร๎
iร
remote and wait 2 seconds. The
remote is testing a single code for
your deviceโs brand.
Did your device turn off?
YES: Press the STOP key to store the code. Youโre done!
Youโve programmed this device key.
NO: *รiรรร" U"๎๎ร>}>๎๎ยฐร/๎
iรรi๎๎รiรรiรรรรร๎
iร๎iรรรV๎`iร
for your brand.
ร ๎iiยซรยซรiรร๎๎}ร" U"๎๎รiรiรรรรรรiV๎๎`รรร๎ร๎๎รร๎รรร`iร๎Viร
รรร๎รร๎vvยฐร7๎
i๎ร๎รร`๎iร]รยซรiรรร-/"*ยฐ
2.ร ๎๎๎`รร๎รรร`iร๎ViยฝรรLร>๎`ร๎๎รร๎
iร
Brand Code list section of the
accompanying code list. Circle
the number for your brand and
keep the list handy.
Code
Lists
Lista
de
Cรณdigos
0
1
2
3
4
5
6
7
8
9
TV
VC
R
0
1
2
3
4
5
6
7
8
9
DV
D
SA
T/CAB
LE
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
5. Look at the number you circled for
your deviceโs brand code number.
Press that number on the remote
keypad.
NOTES
Throughout the programming of each key, be sure to keep
the remote pointed at the IR sensor of the device you are
currently programming the remote to control.
Test the remote with the device to make sure the device
๎iรร๎รรยซร๎}ร>๎๎i`รร๎ร๎
รร๎
iรV๎รรiVรรV๎`iรv๎รร๎>ร๎๎ร๎ร
vร๎Vร๎๎๎>๎๎รรยฐร๎vรร๎๎iรvi>รรรiรร`๎๎ยฝรรร๎ร๎]รรรรร>ร`๎vviรi๎รร
V๎`iยฐร-iiรร๎
iรยบ/iรร๎๎}รร๎
iร๎๎`iรv๎รร๎>ร๎๎ร๎ร๎ร๎Vร๎๎๎>๎๎รรยปร
section below for more information.
๎รร๎๎}รร๎
iร๎ร>๎`ร๎๎`iร-i>รV๎
]รร๎
iรรi๎๎รiร๎}๎๎รiรร
๎iรยซรiรรiรรร๎
>รร>รi๎ยฝรรยซ>รรร๎vรร๎
iรรi>รV๎
ยฐร
/๎
iรรi>รV๎
รร๎๎iรร๎รรร>vรiรรรร๎ร๎๎๎รรiรร๎ญร๎
iร" U"๎๎ร๎iรร
blinks four times and turns off, and the last programmed
V๎`iรร๎`iรรร๎
>รร`iร๎Viร๎iรร๎รรรiร>๎๎i`ยฎยฐ
/๎
iร" U"๎๎ร๎iรรL๎๎๎๎รรv๎รรรร๎๎iรร>๎`รรรร๎รร๎vvรร๎
i๎รร๎
iร
รi๎๎รiร๎
>รร}๎๎iรร๎
ร๎ร}๎
ร>๎๎รร๎
iรV๎`iรยฐร/๎
iรรi๎๎รiรiร๎รรรร๎
iร
๎ร>๎`ร๎๎`iร-i>รV๎
ยฐร๎vรร๎รรร`iร๎Viร๎
>ร๎ยฝรรรรร๎i`ร๎vvรรiร]รรรรร>ร
different search method.
Direct Code Entry
Direct Code Entry lets you enter a code from the accompanying
code list for your brand of device. Itโs not as easy as the other
methods, but itโs potentially the fastest method.
1. Manually turn on the device you
want to control.
3. Press and hold the device key you want to program (the
" U"๎๎ร๎iรรV๎๎iรร๎๎ยฎยฐร
ร 7๎
๎๎iรร๎รยฝรiร๎
๎๎`๎๎}ร`๎ร๎รร๎
iร`iร๎Viร๎iร]รรรiรร๎รรร๎ร๎
iรร
hand enter the ๏ฌrst ๏ฌve-digit code for your brand in the
V๎`iร๎๎รรร๎ญร๎
iร" U"๎๎ร๎iรร}๎iรร๎vvร>vรiรรร๎
iรwรรรร`๎}๎รยฎยฐ
2.ร ๎๎๎`รร๎
iร๎๎`iร๎๎รรรร๎
>รรV>๎iรร๎ร๎
ร
the remote. Locate the section for
the type of device youโre trying to
program, and ๏ฌnd your brand in
that section. Circle the codes for
your brand and keep them handy.
Code
Lists
Lista
de
Cรณdigos
0
1
2
3
4
5
6
7
8
9
TV
VC
R
0
1
2
3
4
5
6
7
8
9
DV
D
SA
T/CAB
LE
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
NOTES
,i๎i๎Liรรร๎รi๎รiรรร๎
iรV๎`iรv๎รรvรรรรiรรiviรi๎Viร๎๎รร๎
iรL๎รร
provided in the Code Retrieval section of this manual.
๎vรร๎รรรLร>๎`ร๎ร๎ยฝรร๎๎รรi`ร๎๎รร๎
iรV๎`iร๎๎รร]รรรiร๎๎iร๎vรร๎
iร๎๎`iร
-i>รV๎
ร๎iร๎
๎`รรร๎รยซร๎}ร>๎รร๎
iรรi๎๎รiรV๎๎รร๎๎ยฐร๎ญ,iviรรร๎รร๎
iร
๎รร๎ร>๎`ร๎>๎ร>๎ร๎๎`iร-i>รV๎
ร๎iร๎
๎`รยฐยฎ
If you release the device key any time during the Direct Code
๎๎รรรรยซร๎Vi`รรi]รร๎
iร" U"๎๎ร๎iรรL๎๎๎๎รรv๎รรรร๎๎iร]ร>๎`ร
ร๎
iรยซร๎Viรรร๎รรiร๎รi`ยฐร/๎
iร๎>รรรยซร๎}ร>๎๎i`รV๎`iรร๎`iรรร๎
iร
device key is retained.
Test the remote with the device to make sure the device
๎iรร๎รรยซร๎}ร>๎๎i`รร๎ร๎
รร๎
iรV๎รรiVรรV๎`iรv๎รร๎>ร๎๎ร๎ร
vร๎Vร๎๎๎>๎๎รรยฐร๎vรร๎๎iรvi>รรรiรร`๎๎ยฝรรร๎ร๎]รรรรร>ร`๎vviรi๎รรV๎`iร
in the list.
4.ร 7๎
i๎รร๎รยฝรiรw๎๎ร๎
i`รi๎รiร๎๎}รร๎
iรwรi๎`๎}๎รรV๎`i]ร๎iiยซร
๎
๎๎`๎๎}ร`๎ร๎รร๎
iร`iร๎Viร๎iรร>๎`ร๎๎๎๎ร>รรร๎
iร" U"๎๎ร๎iรยฐร
ร ๎รรร๎
iร" U"๎๎ร๎iรร๎๎ยถร
YES: Youโre done! Youโve programmed this device key.
ร "]ร๎รรL๎๎๎๎i`รv๎รรรร๎๎iรร>๎`รรรร๎i`ร๎vv\รYou have
either entered a code number that is not in the code lists or
missed a step in the code entry procedure. Try step 3 again.
Manual Code Search
The Manual Code Search lets you go one-by-one through all
ร๎
iรV๎`iรรv๎รรร๎
iร`iร๎Viรร๎รยฝรiรรรร๎๎}รร๎รV๎๎รร๎๎ยฐร7๎
i๎รร๎รรw๎`ร
the one that operates your device, you can stop the search and
store that code.
TIPS:ร/๎
iร" U"๎๎ร๎iรรรiรรiรร>รร>๎ร๎๎`๎V>ร๎รร๎๎}๎
รร`รร๎๎}ร
programming, giving you feedback at each stage of the process.
Each device key is associated with a type of deviceโthe TV is
ยซรiรiรรร๎รรi>รV๎
รv๎รร/6ร]ร-๎/U๎๎๎U๎/๎รv๎รรร>รi๎๎๎รiรรiVi๎รiรร]ร
V>L๎iรL๎รiรร๎รร`๎}๎ร>๎ร/6รV๎๎รiรรiรร]ร๎6๎รv๎รร๎6๎รยซ๎>รiรร]ร
>๎`ร6๎,U๎18รv๎รร6๎,รร๎รร๎6,รยฐร/๎รยซร๎}ร>๎ร>ร`iร๎Viร๎iรรv๎รร
a different type of device, see the ๎๎
>๎}๎๎}ร>ร๎iรยฝรร๎iร๎Viร
Type section.
The Manual Code Search method may take a long time
because the remote searches through all of the codes in
๎รรร๎i๎๎รรร๎๎i๎Lร๎๎๎iยฐร๎vรร๎รรรLร>๎`ร๎รร๎๎รรi`ร๎๎รร๎
iร๎ร>๎`ร
๎๎`iรร๎รรร๎
iร๎๎`iร๎๎รรร]รwรรรรรรรรร๎
iร๎ร>๎`ร๎๎`iร-i>รV๎
ร๎รร
the Direct Code Entry method.
/๎รiร๎รรร๎ร๎
๎รรรร>ร๎๎}ร>ร๎iรรV๎`iร>รร>๎รรยซ๎๎๎รร๎๎รร๎
iร๎>๎ร>๎ร
๎๎`iร-i>รV๎
]รยซรiรรรร๎
iร๎"ร๎๎๎๎ร๎iรยฐ
1. Manually turn on the device you
want to control.
3.ร 7>๎รรร๎ร๎๎รร๎
iร" U"๎๎ร๎iรรV๎๎iรร๎๎ร>๎`รรร>รรร๎๎ยฐร/๎
i๎ร
release both keys.
4. Point the remote directly at the front panel of the device you
ร>๎รรร๎รV๎๎รร๎๎ยฐร*รiรรร" U"๎๎ร๎๎รร๎
iรรi๎๎รiร>๎`รร>๎รรรร
seconds. The remote is testing a single code for your device.
Did your device turn off?
YES: Press the STOP key to store
the code. Youโre done! Youโve
programmed this device key.
NO: *รiรรร" U"๎๎ร>}>๎๎ยฐร/๎
iร
remote tests the next code for
your device.
ร ๎iiยซรยซรiรร๎๎}ร" U"๎๎รiรiรรรรร
seconds until your device turns off.
7๎
i๎ร๎รร`๎iร]รยซรiรรร-/"*ยฐ
TIP: Because there are so many codes, you may have to press
ร๎
iร" U"๎๎ร๎iรร๎>๎รรร๎๎iรpยซ๎รร๎L๎รร๎
ร๎`รi`รร๎vรร๎๎iรยฐ
NOTES
Throughout the programming of each key, keep the remote
pointed at the IR sensor of the device you are programming
the remote to control.
Test the remote with the device to make sure the device
๎iรร๎รรยซร๎}ร>๎๎i`รร๎ร๎
รร๎
iรV๎รรiVรรV๎`iรv๎รร๎>ร๎๎ร๎ร
vร๎Vร๎๎๎>๎๎รรยฐร๎vรร๎๎iรvi>รรรiรร`๎๎ยฝรรร๎ร๎]รรรรร>ร`๎vviรi๎รร
V๎`iยฐร-iiรร๎
iรยบ/iรร๎๎}รร๎
iร๎๎`iรv๎รร๎>ร๎๎ร๎ร๎ร๎Vร๎๎๎>๎๎รรยปร
section below for more information.
During the Manual Code Search, the remote ignores
๎iรยซรiรรiรรร๎
>รร>รi๎ยฝรรยซ>รรร๎vรร๎
iรรi>รV๎
ยฐร
/๎
iรรi>รV๎
รร๎๎iรร๎รรร>vรiรรรร๎ร๎๎๎รรiรร๎ญร๎
iร" U"๎๎ร๎iร
blinks four times and turns off, and the last programmed
V๎`iรร๎`iรรร๎
>รร`iร๎Viร๎iรร๎รรรiร>๎๎i`ยฎยฐ
The " U"๎๎ร๎iร blinks four times and turns off when the
รi๎๎รiร๎
>รร}๎๎iรร๎
ร๎ร}๎
ร>๎๎รร๎
iรV๎`iรยฐร/๎
iรรi๎๎รiรiร๎รรรร๎
iร
๎>๎ร>๎ร๎๎`iร-i>รV๎
ยฐร๎vรร๎รรร`iร๎Viร๎
>ร๎ยฝรรรรร๎i`ร๎vvรรiร]รรรรร
a different search method.
Testing the Code for Maximum Functionality
1. Try a variety of the deviceโs functions with the remote. If
some features of your devices donโt work, go to the next
step to try a different code.
2. ร ,iยซi>รรร๎
iร๎>๎ร>๎ร๎๎`iร-i>รV๎
รvร๎๎รร๎
iรLi}๎๎๎๎๎}ยฐร7๎
i๎ร
the device turns off for the ๏ฌrst time, donโt press the STOP
key, which would store the same code. Instead, with the
unit now off, continue to press the " U"๎๎รkey repeatedly
until the unit turns back on.
3. Once the unit turns back on, you have found another code
that operates the device. Press the STOP key.
4. Test the keyโs functionality again by trying a variety of
functions. If the code controls the majority of the deviceโs
functions, programming is complete. If the code stored
does not give maximum functionality, try another code.
Code Retrieval
Once youโve programmed the remote to control your devices,
you may want to record the codes for future reference. If
you used the Direct Code Entry method, this is easy. Just
๏ฌnd the codes you entered and make a note of them in the
boxes below. If you used one of the Code Search methods to
program your remote or if you used the Direct Entry method
but donโt remember the code, you will need to retrieve each
deviceโs ๏ฌve-digit code. Retrieving the actual code and writing
it down will save you time if you ever need to program the
remote again (e.g., if programming is lost when you change
the batteries). If the codes are recorded, you can use the
Direct Entry method to reprogram your remote to control your
devices, which is quick and easy.
1. Press and hold the device
๎iรร๎ญ/6]ร-๎/U๎๎๎U๎/๎]ร๎6๎]ร
6๎,U๎18ยฎรร๎
๎รiรV๎`iรร๎รร
ร๎ร๎
รร๎รรiรร๎iรiยฐร/๎
iร" U"๎๎ร
๎iรรรรร๎รร๎๎ยฐร๎iiยซรยซรiรร๎๎}รร๎
iร
device key.
IMPORTANT
๎iV>รรiรร๎
๎รรรi๎๎รiรV๎๎รร๎๎รร๎๎รiรร๎
>๎ร๎๎iร`iร๎Vi]รร๎รร
๎รรรรwรรรรยบรi๎๎ยปรร๎
iรรi๎๎รiรร๎
๎V๎
ร`iร๎Viรร๎รรร๎ร๎
รร๎ร
operate. That means, if you wish to operate your TV, you
๎รรรรwรรรรยซรiรรรร๎
iร/6ร๎iรรร๎รยซรรรร๎
iรรi๎๎รiร๎๎รร๎
iร/6ร
Mode. The remote stays in that device mode until you press
>ร`๎vviรi๎รร`iร๎Viร๎iรยฐร๎๎รรiร>๎ยซ๎i]ร๎vรร๎รรรรi๎๎รiร๎รร๎๎ร/6ร
Mode and you want to operate the DVD player, you must
press the DVD key to change device modes.
Accessing Device Menus and Guides
Many devices use on-screen menus and guides to help you
๎>ร๎}>รiรร๎
ร๎ร}๎
ร>๎๎รร๎
i๎รรvi>รรรiรร>๎`รยซร๎}ร>๎๎๎๎}ยฐร7๎
๎๎iร
this remote may not access every menu or guide system
of every device model, it does offer some menu and guide
functionality.
To use a deviceโs on-screen menu or guide system, you ๏ฌrst
have to put the remote in Menu or Guide Mode.
1. Make sure your devices are turned on and your TV is set
ร๎รร๎
iรV๎รรiVรร`iร๎Viร๎๎ยซรรร๎ญรรiรร๎
iร๎ *1/ร๎iรรร๎รร๎}}๎iร
through inputs when in TV Mode.)
2. Press the device key whose menu you want to access.
{ยฐรร 1รiรร๎
iร6"๎ยณร๎ร>๎`ร๎๎ยณร๎ร๎iรรรร๎ร
navigate through the on-screen
menu system or guide. To select the
๎
๎}๎
๎๎}๎
รi`ร๎รi๎]รยซรiรรรร๎
iร"๎ร๎iรยฐ
TIP:ร๎vรร๎
iรรi๎๎รiร`๎iร๎ยฝรรรiรยซ๎๎`]ร
V๎
iV๎รร๎รรiiรร๎
>รรร๎
iร" U"๎๎ร๎iรร๎รร
รร๎๎๎รL๎๎๎๎๎๎}ยฐร/๎
iร" U"๎๎ร๎iรรร๎๎iรร
out after 20 seconds. If this happens,
๎รรรรยซรiรรรร๎
iร๎๎ 1ร๎iรร>}>๎๎]ร>๎`ร
then retry your selection.
Exiting Menu/Guide Mode
The remote automatically times out of Menu or Guide Mode
after 20 seconds of inactivity (no keys being pressed). At that
time, the remote clears the displayed menu from the TV.
If you want to exit the Menu Mode yourself, press the
V๎รรiรยซ๎๎`๎๎}ร`iร๎Viร๎iรร๎๎รร๎
iรรi๎๎รiร๎ญ/6]ร-๎/U๎๎๎U๎/๎]ร
๎6๎]ร6๎,U๎18ยฎยฐร/๎
iร" U"๎๎ร๎iรรรรร๎รร๎vvยฐ
Problem: The remote does not operate your device.
Uรร ๎>๎iรรรรiรร๎
iรรi๎๎รiร๎รร๎๎รร๎
iรV๎รรiVรร๎๎`iรLรรยซรiรร๎๎}รร๎
iร
V๎รรiรยซ๎๎`๎๎}ร`iร๎Viร๎iรร๎ญ/6]ร-๎/U๎๎๎U๎/๎]ร๎6๎]ร6๎,U๎18ยฎยฐร
This tells the remote which device to operate.
Uรร ,i๎๎รiร>๎รร๎Lรร>V๎iรรLiรรii๎รร๎
iรรi๎๎รiร>๎`รร๎
iร`iร๎Viยฐร๎>๎iร
sure youโre aiming the remote at the deviceโs IR sensor.
Uรร ๎>๎iรรรรiรร๎
iรL>รรiร๎iรร>รiรvรiร๎
ร>๎`ร>รiรยซร๎ยซiร๎รร๎๎รร>๎๎i`ยฐร
Replace the batteries with two new AA batteries, if necessary
(see the Battery Installation section).
Problem: The remote canโt be programmed to operate your
device.
Uรร ๎vรร๎รร>รiรรiรร๎๎}รร๎
iรรi๎๎รiรร๎
๎๎iรยซร๎}ร>๎๎๎๎}ร๎ร]รร๎รร๎>รรLiร
too far away from the device or at a wrong angle. There must be
an unobstructed path between the remote and the IR sensor on
the device. Move closer and make sure you point the remote at
the device youโre trying to control.
Uรร ๎vรร๎รยฝรiรรร๎๎}รร๎
iร๎๎รiVรร๎๎รรรรยซร๎}ร>๎๎๎๎}ร๎iร๎
๎`รร๎รi๎รiรร
the codes for your brand and the unit is still not functioning
properly, try the auto, brand, or manual search method.
Uรร /๎รV๎๎รร๎๎รV๎๎L๎รร๎๎รร]ร๎๎๎iร/6ร6๎,รร๎รร/6ร๎6๎ร]รร๎รร๎รรรร
program the individual corresponding device keys to control
each part of the combo unit. Once programmed successfully, the
/6ร๎iรรV๎๎รร๎๎รรร๎
iร/6รvร๎Vร๎๎๎ร]ร>๎`รร๎
iร6๎,U๎18ร๎รร๎6๎ร๎iรร
controls the VCR or DVD functions.
Uรร ๎>๎iรรรรiรร๎
iรL>รรiร๎iรร>รiรvรiร๎
ร>๎`ร>รiรยซร๎ยซiร๎รร๎๎รร>๎๎i`ยฐ
Problem: The remote doesnโt perform commands properly.
Uรร ๎>๎iรรรรiรร๎
iรรi๎๎รiร๎รร๎๎รร๎
iรV๎รรiVรร๎๎`iรLรรยซรiรร๎๎}รร๎
iร
V๎รรiรยซ๎๎`๎๎}ร`iร๎Viร๎iรร๎ญ/6]ร-๎/U๎๎๎U๎/๎]ร๎6๎]ร6๎,U๎18ยฎยฐร
This tells the remote which device to operate.
Uรร ๎>๎iรรรรiร`iร๎Viร๎รรรi>`รร๎ญv๎รรiร>๎ยซ๎i]รร๎
iร๎6๎รยซ๎>รiรร๎
>รร>ร
disc loaded).
Uรร 9๎รร๎>รร๎
>รi ร ยซรiรรi`ร>๎ ร๎๎ร>๎๎`ร๎ i รรv๎รรร๎
iร ๎ ๎`iรร๎
iรรi ๎ ๎รiร๎รร๎๎ยฐ
Uรร ๎vรร๎รยฝรiรรรร๎๎}รร๎รi๎รiรร>รV๎
>๎๎i๎ร๎ร๎Liรร`๎รiVร๎ร]รรรรรยซรiรร๎๎}ร
ร๎
iร"๎ร๎iรร>vรiรรi๎รiร๎๎}รร๎
iรV๎
>๎๎i๎ร๎ร๎Liรร>รรร๎
๎รร๎รร>ร
requirement of certain models and brands.
Uรร /๎
iรiร๎รร>รยซ๎รร๎L๎๎๎รรรร๎
>รร>รยซร๎}ร>๎๎i`รV๎`iร๎>รร๎๎๎รรLiร
able to control some of your device features (for example, only
turns a device on and off). To con๏ฌrm that the device key is
programmed with the correct code for maximum functionality,
test the device. Attempt to control a variety of the deviceโs
functions with the remote. If some of the features of your
devices donโt work, try programming the remote with a different
code in the list using the Direct Code Entry Method, until you
๏ฌnd the code that allows the remote to control the majority of
your deviceโs functions. Different codes can provide different
levels of functionality.
*ร๎L๎i๎\ร/๎
iร" U"๎๎ร๎iรร`๎iรร๎๎รร๎๎}๎
รรร๎
i๎รร๎รรยซรiรรร>ร๎iรยฐ
Uรร 9๎รร๎>รร๎
>รiรยซรiรรi`ร>๎ร๎๎ร>๎๎`ร๎iรรv๎รรร๎
iร๎๎`iรร๎
iรรi๎๎รiร๎รร
in.
Uร ๎>๎iรรรรiรร๎
iรรi๎๎รiร๎รร๎๎รร๎
iรV๎รรiVรร๎๎`iรLรรยซรiรร๎๎}รร๎
iร
V๎รรiรยซ๎๎`๎๎}ร`iร๎Viร๎iรร๎ญ/6]ร-๎/U๎๎๎U๎/๎]ร๎6๎]ร6๎,U๎18ยฎยฐร
This tells the remote which device to operate.
Uรร ๎>๎iรรรรiรร๎
iรL>รรiร๎iรร>รiรvรiร๎
ร>๎`ร>รiรยซร๎ยซiร๎รร๎๎รร>๎๎i`ยฐร
Replace the batteries with two new AA batteries, if necessary
(see the Battery Installation section).
*ร๎L๎i๎\ร/๎
iรรi๎๎รiรร๎๎๎ร๎๎รรV๎
>๎}iรV๎
>๎๎i๎รร๎๎ร`iร๎Viยฐ
Uร ๎>๎iรรรรiรร๎
iรรi๎๎รiร๎รร๎๎รร๎
iรV๎รรiVรร๎๎`iรLรรยซรiรร๎๎}รร๎
iร
V๎รรiรยซ๎๎`๎๎}ร`iร๎Viร๎iรร๎ญ/6]ร-๎/U๎๎๎U๎/๎]ร๎6๎]ร6๎,U๎18ยฎยฐร
This tells the remote which device to operate.
Uรร *รiรรรร๎
iร"๎ร๎iรร>vรiรรร๎รรi๎รiรร>รV๎
>๎๎i๎ร๎ร๎Liรยฐ
Uรร ,i๎๎รiร>๎รร๎Lรร>V๎iรรLiรรii๎รร๎
iรรi๎๎รiร>๎`รร๎
iร`iร๎Viยฐร๎>๎iร
sure to aim the remote at the IR sensor on the device.
Problem: The deviceโs menu does not appear on the TV screen.
Uรร ๎>๎iรรรรiรร๎รร๎
>รiรV๎๎๎iVรi`รร๎
iร`iร๎Viรร๎รร๎รรร/6รยซร๎ยซiร๎รร>๎`ร
selected the correct input. (See your devicesโ Ownerโs Manuals for
proper connection procedures.)
Uร ๎>๎iรรรรiรร๎
iรรi๎๎รiร๎รร๎๎รร๎
iรV๎รรiVรร๎๎`iรLรรยซรiรร๎๎}รร๎
iร
V๎รรiรยซ๎๎`๎๎}ร`iร๎Viร๎iรร๎ญ/6]ร-๎/U๎๎๎U๎/๎]ร๎6๎]ร6๎,U๎18ยฎยฐร
This tells the remote which device to operate.
Uรร ๎i๎รร>VViรรร๎ร๎ยฝรรรรยซยซ๎รรi`รv๎รร>๎๎รLร>๎`รยฐร9๎รร๎>รร๎ii`รร๎รรรiร
your original remote control to access menu functions for some
devices.
๎๎รร๎๎รiร๎๎v๎ร๎>ร๎๎๎]รยซ๎i>รiรร๎ร๎รรรรรยฐรV>>VViรร๎ร๎iรยฐV๎๎
Consumer Help Line: 1-800-420-7968
Audiovox Electronics Corporation (the โCompanyโ) warrants to you the
original retail purchaser of this product that should it, under normal use
and conditions, be proven defective in material or workmanship during
its lifetime while you own it, such defect(s) will be repaired or replaced
(at the Companyโs option) without charge for parts and repair labor. To
๎Lร>๎๎รรiยซ>๎รร๎รรรiยซ๎>Vi๎i๎รรร๎ร๎
๎๎รร๎
iรรiร๎รร๎vรร๎
๎รร7>รร>๎รร]รร๎
iรยซร๎`รVรร
is to be delivered with proof of warranty coverage (e.g. dated bill of sale),
speci๏ฌcation of defect(s), transportation prepaid, to the Company at the
address shown below.
/๎
๎รร7>รร>๎รรร`๎iรร๎๎รรV๎รiรรยซร๎`รVรรยซรรV๎
>รi`]รรiรร๎Vi`ร๎รรรรi`ร๎รรร๎`iร
ร๎
iร1๎๎รi`ร-ร>รiรร๎รร๎>๎>`>ยฐร/๎
๎รร7>รร>๎รรร๎รร๎๎รรรร>๎รviร>L๎iร>๎`ร`๎iรร
not extend to costs incurred for installation, removal or reinstallation of
ร๎
iรยซร๎`รVรยฐร/๎
๎รร7>รร>๎รรร`๎iรร๎๎รร>ยซยซ๎รร๎vร๎๎รร๎
iร๎๎๎ยซ>๎รยฝรร๎ยซ๎๎๎๎๎]ร
the product has been damaged through alteration, improper installation,
mishandling, misuse, neglect, accident, or the simultaneous use of different
battery types (e.g. alkaline, standard or rechargeable).
/๎๎ร๎8/๎ /ร"๎ร/๎๎ร๎"๎*๎ 9ยฝ-ร๎๎๎๎๎๎๎/9ร1 ๎๎,ร/๎๎-ร7๎,,๎ /9ร๎-ร
LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO
๎6๎ /]ร-๎๎๎๎ร/๎๎ร๎"๎*๎ 9ยฝ-ร๎๎๎๎๎๎๎/9ร๎8๎๎๎๎ร/๎๎ร*1,๎๎๎-๎ร*,๎๎๎ร
*๎๎๎ร๎9ร*1,๎๎๎-๎,ร๎",ร/๎๎ร*,"๎1๎/ยฐ
/๎
๎รร7>รร>๎รรร๎รร๎๎ร๎๎iรร๎vร>๎๎ร๎ร๎
iรรiรยซรiรรรร>รร>๎ร๎iรร๎รร๎๎>L๎๎๎ร๎iรยฐร๎ 9ร
๎๎*๎๎๎๎ร7๎,,๎ /๎๎-]ร๎ ๎๎1๎๎ ๎ร๎ 9ร๎๎*๎๎๎๎ร7๎,,๎ /9ร"๎ร
๎๎,๎๎๎ /๎๎๎๎๎/9ร",ร๎๎/ ๎--ร๎",ร๎ร*๎,/๎๎1๎๎,ร*1,*"-๎ร-๎๎๎๎ร
๎๎ร๎๎๎๎/๎๎ร/"ร๎1,๎/๎" ร"๎ร/๎๎-ร7๎,,๎ /9ยฐร๎ ร "ร๎๎-๎ร-๎๎๎๎ร
/๎๎ร๎"๎*๎ 9ร๎๎ร๎๎๎๎๎๎ร๎",ร๎ 9ร๎" -๎+1๎ /๎๎๎ร",ร๎ ๎๎๎๎ /๎๎ร
๎๎๎๎๎๎-ร7๎๎/-"๎6๎,ยฐร ๎รยซiรร๎๎ร๎รรรiยซรiรi๎ร>ร๎รiร๎รร>รร๎
๎ร๎รขi`ร
to assume for the Company any liability other than expressed herein in
connection with the sale of this product.
Some states/provinces do not allow limitations on how long an implied
warranty lasts or the exclusion or limitation of incidental or consequential
damage so the above limitations or exclusions may not apply to you. This
7>รร>๎รรร}๎รiรรร๎รรรยซiV๎wVร๎i}>๎รร๎}๎
รรร>๎`รร๎รร๎>รร>๎ร๎ร๎
>รiร๎ร๎
iรรร๎}๎
รร]ร
which vary from state/province to state/province.
U.S.A.: Audiovox Electronics Corporation, 150 Marcus Blvd., Hauppauge,
New York 11788
CANADA: ๎ร`๎๎ร๎รร,iรรร๎ร๎i๎รiร]รVร๎ร๎i๎V๎]รรรnxร๎i๎๎i`รร,๎>`]ร
1๎๎รรร]ร๎๎๎รรยฃร]ร๎๎รร๎รร>ร}>]ร"๎ร>ร๎๎รร๎x/รร๎x
Trademark(s) ยฎ Registered
,๎,{ยฃรร1-รรคx
ยฉ2010 Audiovox Accessories Corporation
111 Congressional Blvd., Suite 350
Carmel, IN 46032
Step 1: Install your batteries
Step 2: Program your remote
Tour of the Remote
Advanced Functions
Troubleshooting
Limited Lifetime Warranty
3
DVD CODE
5
SATโขCBLโขDTC CODE
1
TV CODE
SAT CABLE DTV CONVERTER
รยฐรร /๎ร>VViรรร๎i๎รร]รยซรiรรรร๎
iร๎๎ 1ร๎iรยฐร/๎ร>VViรรร}ร๎`iร]ร
ยซรiรรรร๎
iร๎1๎๎๎ร๎iรยฐร/๎
iร" U"๎๎ร๎iรรรร>รรรรL๎๎๎๎๎๎}]ร
indicating you are in Menu or Guide Mode.
" U"๎๎ร๎iร
2.ร *รiรรร>๎`ร๎
๎๎`รร๎
iร`iร๎Viร๎iรรร๎รรร>๎รรร๎รยซร๎}ร>๎ยฐร7๎
๎๎iร
youโre holding down the device key, use your other hand
ร๎รยซรiรรร>๎`ร๎
๎๎`รร๎
iรรi๎๎รiยฝรร" U"๎๎ร๎iรร>รรร๎
iรร>๎iร
time.
Note: All TV codes begin with the number 1; all VCR and DVR
codes begin with the number 2; all DVDs, the number 3; and
>๎๎รร>รi๎๎๎รiรรiVi๎รiรร]รV>L๎iรL๎รiรร>๎`ร`๎}๎ร>๎ร/6รV๎๎รiรรiรร]ร
the number 5.
5. Repeat step 4 until you have retrieved all ๏ฌve numbers in
ร๎
iรV๎`iยฐร๎vรiรรร๎
iรwvร๎
ร๎ร๎Liรร๎รรรiรร๎iรi`]รร๎
iร" U"๎๎ร
key blinks brie๏ฌy, then turns off.
TIP:ร/๎รiร๎รรร๎
iร๎๎`iร,iรร๎iร>๎ร๎๎`iร>รร>๎รรร๎๎i]รยซรiรรรร๎
iร
๎"ร๎๎๎๎ร๎iรยฐ
Note: If you press an invalid key during the Code Retrieval
process, the remote will not respond. If you do not press a
ร>๎๎`ร๎๎`iร,iรร๎iร>๎ร๎iรร๎ญ/6]ร-๎/U๎๎๎U๎/๎]ร๎6๎]ร6๎,U๎18]ร
๎ ๎"]ร๎"ร๎๎๎๎ยฎ]ร๎๎`iร,iรร๎iร>๎รร๎๎iรร๎รรร>vรiรรยฃxรรiV๎๎`รยฐร
/๎
iร" U"๎๎ร๎iรรL๎๎๎๎รรv๎รรรร๎๎iร]ร>๎`รร๎
i๎รรรร๎รร๎vvยฐ
๎"ร๎๎๎๎ exits remote programming; it also performs the
same functions as on your original remotes.
Theร๎ *1/ and pร๎ญ`>ร๎
ยฎรkey has three functions: (1) it toggles
through all the video sources connected to your TV; (2) when
the remote is in VCR mode, this button toggles between VCR
and the TV input; (3) when youโre entering digital channel
numbers directly, this button lets you separate the main
channel number from the sub-channel number (such as 59.1).
๎>V๎๎๎}๎
ร๎๎}
Backlight illumination helps you see the remote control keys
better in the dark. You can turn backlight illumination on or off
by pressing the backlight key ( ). Backlighting stays on as
long as keys are being pressed and turns off six seconds after
the last keypress. Once the backlight time has timed out, any
keypress will reactivate it. If the backlight illumination is on,
and you press the backlight key, the backlight turns off.
รยฐรร 7๎
๎๎iร๎
๎๎`๎๎}รร๎
iร`iร๎Viร๎iรร`๎ร๎]รยซรiรรร>๎`ร๎
๎๎`รร๎
iร
๎ ๎"ร๎iรยฐร/๎
iร" U"๎๎ร๎iรรรรร๎รร๎vvยฐร๎vรiรร๎
๎๎`๎๎}ร`๎ร๎ร
L๎ร๎
ร๎iรรรv๎รรร๎
รiiรรiV๎๎`ร]รร๎
iร" U"๎๎ร๎iรรรรร๎รรL>V๎ร
on.
รยฐรร ,i๎i>รiรL๎ร๎
ร๎iรรยฐร/๎
iร" U"๎๎ร๎iรรรi๎>๎๎รร๎๎ยฐ
4. Starting with the number 1 key, press and release each
number key on the keypad in the following order: 1-9, then
รคยฐร/๎
iร๎ร๎Liรรร๎
>รรV>รรiรรร๎
iร" U"๎๎ร๎iรรร๎รL๎๎๎๎ร๎รรร๎
iร
๏ฌrst number of the code. As you ๏ฌnd each number of the
code, write it down for future reference.
TIP: Each device key is associated with a type of deviceโthe
/6ร๎รรยซรiรiรรร๎รรi>รV๎
รv๎รร/6ร]ร-๎/U๎๎๎U๎/๎รv๎รรร>รi๎๎๎รiร
รiVi๎รiรร]รV>L๎iรL๎รiรร๎รร`๎}๎ร>๎ร/6รV๎๎รiรรiรร]ร๎6๎รv๎รร๎6๎ร
ยซ๎>รiรร]ร>๎`ร6๎,U๎18รv๎รร6๎,รร>๎`ร๎6,รยฐร/๎รยซร๎}ร>๎ร>ร
device key for a different type of device, see the Changing a
๎iรยฝรร๎iร๎Viร/รยซi section.
/๎
iร" U"๎๎ร๎iรรรiรรiรร>รร>๎ร๎๎`๎V>ร๎รร๎๎}๎
รร`รร๎๎}ร
programming, giving you feedback at each stage of the
process.
Actual model may vary
from illustration
TIPS: Each device key is associated with a type of deviceโ
ร๎
iร/6ร๎รรยซรiรiรรร๎รรi>รV๎
รv๎รร/6ร]ร-๎/U๎๎๎U๎/๎รv๎รรร>รi๎๎๎รiร
รiVi๎รiรร]รV>L๎iรL๎รiรร๎รร`๎}๎ร>๎ร/6รV๎๎รiรรiรร]ร๎6๎รv๎รร
๎6๎รยซ๎>รiรร]ร>๎`ร6๎,U๎18รv๎รร6๎,รร๎รร๎6,รยฐร/๎รยซร๎}ร>๎ร
a device key for a different type of device, see the Changing
>ร๎iรยฝรร๎iร๎Viร/รยซi section.
/๎รiร๎รรร๎ร๎
๎รรรร>ร๎๎}ร>ร๎iรรV๎`iร>รร>๎รรยซ๎๎๎รร๎๎รร๎
iร๎รร๎ร
Code Search, press the ๎"ร๎๎๎๎ key.
Changing A Keyโs Device Type
Each device key is associated with a type of deviceโthe TV is
ยซรiรiรรร๎รรi>รV๎
รv๎รร/6ร]ร-๎/U๎๎๎U๎/๎รv๎รรร>รi๎๎๎รiรรiVi๎รiรร]ร
cable boxes or digital TV converters, DVD for DVD players, and
6๎,U๎18รv๎รร6๎,รร๎รร๎6,รยฐร/๎รยซร๎}ร>๎รร๎
iรiร๎iรรรร๎รV๎๎รร๎๎ร
a different kind of device, you have to reassign them ๏ฌrst.
,i>รร๎}๎๎๎}รร๎
iร6๎,U๎18ร๎iรร/๎ร๎๎๎รร๎๎ร"ร๎
iรร
Devices
/๎
iร6๎,U๎18ร๎iรร`iv>ร๎รรรร๎รV๎๎รร๎๎ร>ร6๎,ร๎รร๎6,ยฐร๎vรร๎รรร>๎รร
ร๎
iร6๎,U๎18ร๎iรรร๎รV๎๎รร๎๎ร>ร`๎vviรi๎รร`iร๎Viร๎ญ>๎ร>``๎ร๎๎๎>๎ร
TV, DVD, satellite, cable box or digital TV converter, for
example), you must reassign it.
ยฃยฐรร *รiรรร>๎`ร๎
๎๎`รร๎
iร6๎,U๎18ร๎iรยฐร/๎
iร" U"๎๎ร๎iรรรรร๎รร๎๎ยฐ
รยฐรร 7๎
๎๎iร๎
๎๎`๎๎}ร`๎ร๎รร๎
iร6๎,U๎18ร๎iร]รยซรiรรร>๎`รรi๎i>รiรร๎
iร
number key on the keypad for the device you wish to control
๎ญรiiรร๎
iรV๎
>รรรLi๎๎รยฎยฐร/๎
iร" U"๎๎ร๎iรรรรร๎รร๎vvยฐ
รยฐรร ,i๎i>รiรร๎
iร6๎,U๎18ร๎iรยฐร/๎
iร" U"๎๎ร๎iรรL๎๎๎๎รรv๎รรร
ร๎๎iรร>๎`รร๎
i๎รรรร๎รร๎vvยฐร/๎
iร6๎,U๎18ร๎iรร๎รร๎๎รรรiรรร๎ร
control the device type you selected.
{ยฐรร ๎๎๎๎๎รรร๎
iร`๎รiVร๎๎๎รร๎๎รร๎
iร>รร๎]รLร>๎`]ร`๎รiVรรi๎รรร]ร๎รร
๎>๎ร>๎รV๎`iรรi>รV๎
รร๎รยซร๎}ร>๎รร๎
iร6๎,U๎18ร๎iรยฐร
6๎,U๎18ร๎๎9ร๎" /,"๎-\
Additional TV press 1
VCR or DVR press 2
Additional DVD press 3
Additional satellite, cable box or
digital TV converter
press 5
VCRโขAUX CODE
DVR/VCR DVD TV -๎/U๎๎๎U๎/๎
/