Sytech SYX250BT Owner's manual

Brand: Sytech

Model: SYX250BT

Category: Portable speakers

Type: Owner's manual

Sytech SYX250BT is a Bluetooth tower speaker system with a range of features to enhance your audio experience. It has a USB port for connecting external storage devices, allowing you to play music directly from them. The system also has an audio input, enabling you to connect other audio sources like your phone or MP3 player. Additionally, it features an FM radio tuner, so you can listen to your favorite radio stations wirelessly. With its multiple connectivity options, you can enjoy your music in various ways.

Page is loading ...

English

Contents

Location of Controls

..........................................................Page

Instruction Manual..............................................................Page

Technical Specifications

....................................................Page

Disposal

................................................................................Page

Location of Controls

English

Symbols in these Instructions for Use

WARNING:

Warns of dangers for your health and indicates potential

risks of injury.

CAUTION:

Indicates potential dangers for the device or other objects.

NOTE:

Highlights tips and information for you.

General Safety Guidelines

Before using this device, carefully read this user manual and

keep it together with the Warranty Certiﬁcate, cashier receipt

and if possible, the original package inclusive its interior pack-

ing. If you hand on the device to any third person, include the

user manual as well.

• Toavoidtheriskofreorelectricshock,youshouldnot

exposethedevicetorainorhumidity.Donotusethe

device near water (e.g. bathroom, swimming pool, humid

cellars).

• Do

notusetheunitinextremelyhot,cold,dusty,ordamp

places.

• Theunitisdesignedsolelyforprivateuseanditsin-

tended purpose. This unit is not designed for commercial

use.

• Make

surethatthepowercableisnotbent,pinched,or

comes into contact with heat sources.

• Makesurethatthepowercableisnotatrippinghazard.

• Never

touchthemainsplugorthecordwithwethands.

• Alwaysconnecttheunittoaproperlyinstalledplug

socket. Be sure the device voltage corresponds to the

grid voltage.

• Themainsplugmustalwaysbeeasilyaccessible.

• Always

installbatteriesinthecorrectdirection.

• Avoidcoveringthedevice’sventopenings.

• Never

covertheventholeswithobjects,suchasmaga-

zines, tablecloths, curtains etc.

• Thisapplianceshallnotbeexposedtodrippingor

splashing water and that no object ﬁlled with liquids such

as vases shall be placed on apparatus.

• Opensourcesofre,suchase.g.burningcandlesmay

not be placed onto the unit.

• Neveropenthedevice’scase.Improperrepairscancause

severe danger to the user. If the device or particularly the

power cord is damaged, don’t use the device any further

and have it repaired by a qualiﬁed specialist. Check the

power cord regularly for damages.

• Toavoidanydanger,adamagedpowercordmustbe

replaced only by the producer, its customer service or a

similarly qualiﬁed person with an equal cord.

• Ifthedevicewon’tbeusedoveranextendedperiodof

time, disconnect the power cord and remove the batter-

ies.

These symbols may be found on the device and shall indicate

the following:

The lightning symbol warns the user of danger-

ously high voltages inside the case.

Theexclamationmarksymbolpointstoimpor-

tant instruction or maintenance remarks in the

accompanying guidelines.

Children and disabled persons

• Forthesafetyofyourchildren,keepanypackingparts

(plastic bags, cartilage, Styrofoam etc.) out of their reach.

WARNING!

Don’t let small children play with foils for danger of

suffocation!

• Thisdeviceisnotintendedforusebypersons(includ-

ing children) with reduced physical, sensory or mental

capabilities,orlackofexperienceand/orknowledge

unless they have been given supervision or instructions

concerning the use of the device by a person responsible

for their safety.

• Supervisechildrentoensuretheydonotplaywiththe

device.

Location of Controls

1 VOLUME control (Volume/control lamp)

2 USB port

3 PLAY/PAUSE button (play/pause)

4 NEXT/ PREVbuttons(next/previoustrack)

5 STANDBY button (On/Standby)

6 IR receiver for remote control

7 Display

8 Standby indicator lamp

9 SOURCE button (select source)

10 F.FWD/ F.RWD buttons (scan forward/back)

11 STOP button (Stop)

Back Side (not shown)

RESET button (reset)

AUDIOR/Ljacks(2xRCA)

Wire antenna

Mains connection jack

POWER ON/OFF Mains switch

Thank you for purchasing the Sytech SY-X250BT Bluetooth tower speaker system. We are sure this product will satisfy your needs. Welcome to Sytech!

Thank you for purchasing the Sytech SY-X250BT Bluetooth

tower speaker system. We are sure this product will satisfy

your needs. Welcome to Sytech!

Instruction Manual

English

Remote Control

1 REPEAT (repeat) button

MUTE button

3 Number buttons

4 10+ button

5 “F” button

CH+/ CH-buttons(next/previoustrack/select

preset radio stations)

7 button (Stop)

8 VOL+/VOL- buttons (volume)

9 TONE button

10 SEARCH button

11 MO/ST button (Mono/Stereo)

12 SAVE button

13 (play/pause) button

14 TU+/ TU- buttons (scan forward/back)

15 FM button (radio)

16 AUDIO button

17 BLUETOOTH button

18 USB button

19 STANDBY button (On/Off)

20 RANDOM button (random playback)

Special Safety Precautions for this device

WARNING:

Avoidhearinglossduetoextremevolume.

CAUTION:

• Donotsubjectthespeakerstoextremeheat,coldor

humidity.

• Donotoperatethedeviceonmaximumvolume.This

can cause damage.

• Donottouchthespeakermembraneswithngersor

objects. This will cause damage to the membranes.

First Use of the Device/Introduction

NOTE:

Some buttons can be found both on the device and on the

remote control. Identical buttons perform the same func-

tion.

• Selectaproperplaceforthedevice.Adry,levelandslip

proof surface is suitable.

• Makesurethedeviceisventedsufciently!

• Removetheprotectivelmfromthedevice,ifpresent.

Mount Pedestal

• Carefullyplacethelefthandsideofthespeakerboxonto

a table.

NOTE:

Place a blanket under the speaker to avoid scratching

the surface.

• Mountthebottomplatewithfourscrewsatthebottom

ofthespeakerbox.

• Nowstandthespeakerboxontheooragain.

Power supply

• Connectthemainscabletotheconnectorjacksocketon

the back of the device.

• Insertthegridplugintoaproperlyinstalledthreeprong

socket with 230 V, 50 Hz.

• Makesurethegridvoltagecorrespondstothegureson

the rating plate.

NOTE:

Disconnect from mains power supply during longer periods

of non-use.

Insert/Replace Battery in Remote Control

NOTE:

The lithium cell in the battery compartment of the remote

control may have been safeguarded for transport with a

pieceoffoil.Thisextendsthelifeofthebattery.Please

remove this foil before the ﬁrst use to make the remote

control ready for operation.

• Openthebatterycompartmentontheundersideofthe

remote.

• Replacethecellbyabatteryofthesametype(CR2025).

Check that the polarity is correct (see battery compart-

ment).

• Closethebatterycompartment.

If the remote is not in use for a lengthy period of time, please

remove the battery to prevent the battery acid from “leaking”.

WARNING:

• Donotexposethebatteriestointenseheat,suchas

sunlight, ﬁre or similar. Danger of explosion!

• Keepbatteriesoutofthereachofchildren.Theyare

not toys.

• Donotforcebatteriesopen.

• Avoidcontactwithmetallicobjects.(Rings,nails,screws

etc.) Danger of short circuits!

• Shortcircuitsmayoverheatorevenignitebatteries.

This may lead to combustion.

• Whentransportingthebatteries,covertheterminalsfor

your safety with an adhesive strip.

• Ifabatteryleaks,donotrubtheuidintotheeyesor

the skin. If acid comes into contact with the eyes, rinse

with puriﬁed water and seek medical advice if symp-

toms persist.

English

CAUTION:

Batteries must not be disposed of in the garbage. Please

bring used batteries to competent collection centers or

back to the dealer.

Restoring the factory defaults

Any errors during operation can be remedied by pushing the

reset button.

• Byusingawireorsimilar,presstheresetbutton(RESET)

on the back of the device to reset the electronics. The

settings made by you will be lost in the process.

General Operation

Switch device on/off

• TurnthedeviceonbysettingthemainsswitchPOWER

on the back to the “ON” position

• Withthe

STANDBY button (5/19), you can switch the

unit between standby and operating mode. In standby,

the pilot lamp (8 on the device) lights red.

• Toturnoffthedevice,setthemainsswitchPOWERon

the back to the “OFF” position. To disconnect the unit

completely from the mains, pull the mains plug from the

socket.

NOTE: In BLUETOOTH, USB and AUDIO mode

Afterapprox.15minuteswithoutasignal,thedeviceauto-

matically switches to standby.

Volume

By pressing the VOL+/VOL- buttons (8 on the remote control)

you can adjust the desired volume.

To adjust the volume on the device, turn the VOLUME control

(1).

Infrared Remote Control

For wireless control within a distance of 5 m. If the distance

decreases you should change the batteries. For proper

operation mind a clear view between the remote control and

the sensor on the device.

Sound Settings

Press the TONE button (9 on the remote control) to adjust

the settings for the treble (tr), the basses (bS) and the overall

volume (VOL) in turn. You can normally adjust the settings

with the VOL+/VOL- buttons, or the VOLUME control.

NOTE:

• Ifnecessary,changetheEQsettinginyourplayback

unit to create the best sound.

• Thesettingsfortrebleandbasswillberesetto“00”

each time you switch off the device.

MUTE (2 on the remote control)

For immediate muting of the volume. Press

MUTE again

to cancel the function

NOTE:

When activating the function, the message “VL – OFF”

will brieﬂy be shown on the display. The activated function

cannot be permanently shown on the display for technical

reasons.

Radio mode

1. Fully uncoil the wire antenna.

2. Repeatedly press the SOURCE button (9) , until “FM”

is shown on the display. The indicator lamp (1) will light

up red. Alternatively, you can also press the FM button

(15 on the remote control).

3. Automatically search for radio stations:

Press the SEARCH button (10 on the remote control).

The unit scans the complete frequency band for stations.

The radio stations found are stored in ascending order of

frequency. The sequence cannot be altered later. Preset

radio stations are overwritten.

Manual scan for radio stations:

Brieﬂy press the / buttons (10/14), until you have

found the radio station which you are looking for. If you

keep one of the buttons pressed, the device will scan to

thenextradiostation.

Direct frequency entry:

If you know the frequency of the radio station you can

enter it as follows.

• Pressthe“F”button(5ontheremotecontrol).The

indicator “- - - : - -“. will appear on the display. Enter

the frequency with the number buttons (3) of the

remote control.

4. If the reception is too weak and there is interference on

the received station, try to improve the reception by

altering the position and uncoiling or coiling the antenna.

For FM stations, you can use the MO/ST button (11 on

the remote control) to switch between mono and stereo

reception. We recommend that you switch to mono in

case of bad reception.

NOTE:

The activated stereo function is shown in the display

through the symbol “ “ .

Manually storing stations

1. Use the

/ respectively the number buttons to select

the preset location at which you want to store the radio

station.

2. Search for the desired radio station as described above

under point 3, “Manually scan for radio station”.

3. Press the SAVE

button (12 on the remote control) to

preset the radio station.

4. Repeat the above steps to save up to 60 FM radio stations.

English

Select the preset radio station

You have two options to select the preset radio stations.

• Thepresetradiostationscanbeselectedbyrepeatedly

pressing the

/ button (4/6).

• Enterthedesiredpresetlocationwiththenumberbut-

tons (3 on the remote control). With preset locations

above 9, ﬁrst press the 10+ button (4 on the remote con-

trol). Each time you push the 10+ button you will increase

the entry by 10 more preset locations.

Playing back music ﬁles

You have three options to play back your own music ﬁles with

the unit: hardwired, wireless via Bluetooth, or via the USB

port.

By cable

1. Connecttheexternaldevicewithacinchcable(2xRCA)

to the AUDIO R/L jacks on the back of the speaker. If

required, use a suitable adapter (not included).

2. Repeatedly press the

SOURCE button (9) until “AU-

DIO” is shown on the display. The operating indicator

light (1) will light up red. Alternately, you can also press

the AUDIO button (16 on the remote control).

3. Start the playback of your audio source. Listen to the

sound playback via the speaker. You can adjust the

volume with the VOL+/VOL- button (8 on the remote

control) or the VOLUME control (1).

4. For the further procedure, please refer to the user manual

oftheexternalaudiosource.

NOTE:

Ifpossible,adjustthevolumeoftheexternalunittoacom-

fortable level.

Cordless via Bluetooth

Bluetooth involves a technology for wireless radio connec-

tion of devices over a short distance. Devices with Bluetooth

standard are transmitting between 2.402 and 2.480 GHz in

the ISM band (Industrial, Scientiﬁc and Medical). Interference

canbecausedforexamplebyWLAN-networks,DABradios,

cordless phones, or microwave ovens which work on the

same frequency band.

This device offers you the possibility to use a Bluetooth-

enableddevice.Thefunctionalradiusislimitedtoapprox.

10 metres depending on the surroundings and the unit used.

If your playing device supports the A2DP proﬁle (Advanced

Audio Distribution Proﬁle) and has a music-player function,

then you can also wirelessly transfer music to the device. The

A2DP proﬁle involves a multi-vendor Bluetooth proﬁle. By

streaming, stereo-audio signals are wirelessly transferred be-

tween the playing device (source) and the receiving device.

To remotely control the source, the playback device has to

support the AVRCP proﬁle (Audio Video Remote Control

Proﬁle).

Due to the different device manufacturers, models, and

software versions, a full functionality cannot be guaranteed.

• Logging

ondevices(Pairing)

Before you listen to music via the unit, you must pair the

devices.

Ensure, that the Bluetooth function is activated in

your player (e.g. mobile phone). For this, refer to the

operation manual of your player.

Press the

SOURCE button (9) repeatedly, until

“– bt –“ is shown on the display. Alternatively, you

can also press the BLUETOOTH button (17 on the

remote control). The operating indicator lamp (1)

will ﬂash rapidly to show that the device is in pairing

mode.

3. Chose the Bluetooth menu in your player and register

the device in your player. For this, refer to the opera-

tion manual of your player. The device “SY-X250BT”

will show in your player as a selection.

NOTE:

Only one playback unit can be connected to the

speaker. If the speaker is already connected to

another playback unit, the speaker will not appear

in the BT selection menu.

4. Now enter the password “0000” in your player,

depending on the device manufacturers, model, and

software version.

If pairing was done successfully, a beep will be heard and

the indicator lamp will slowly ﬂash blue. If the connection for

the audio playback has been completely established, then

a beep will sound again and the indicator lamp will light up

blue.

For operation, please refer to the section “Description of the

controls”.

possible,adjustthevolumeoftheexternalunittoacom-

fortable level

NOTE:

• Dependingonthedevicemanufacturer,youneedto

perform the registration (PAIRING) again to connect the

devices.

• Incaseofproblemsduringrepairingofaplayback

device, deactivate the WiFi-/ and mobile data function

in your playback device.

• TheBluetoothcompatibilitycannotbeensuredfor

devices (e.g. mobile phones) getting released in the

future.

• Toensureanoptimalconnection,makesurethatthe

battery of your player is completely charged.

• Someofthemobilephonebrandshaveanenergy-

saving mode. Deactivate the energy-saving mode as

it can otherwise result in problems during the data

transfer through Bluetooth.

English

NOTE:

• Tobeabletotransferaudiodata,Bluetoothneedsto

stay activated in your player Observe the operation

manual of your player.

• Ifamobilephoneonwhichyouareplayingmusicre-

ceives a call, the music will be interrupted. The sound is

played back by the speaker depending on the mobile

phone. To transfer the conversation to your mobile

telephone, please refer to the popup on the mobile

phone display. After you have terminated the phone

call, the devices will be connected to each other again.

You may have to restart playback.

USB port (2)

This device has been developed in line with the latest techni-

cal advances in the USB ﬁeld. The wide range of different

USB storage devices of all types which are currently on the

market, unfortunately do not allow us to guarantee full com-

patibility with all USB storage devices. For this reason, in rare

cases there may be problems in playing back ﬁles from USB

storage devices. This is not a malfunction of the device.

1. Press the

SOURCE button (9) repeatedly until “LOAd”

is shown on the display. The indicator lamp (1) will light

up red. Alternatively, you can also press the USB button

(18 on the remote control).

2. Connect a USB storage device directly into the port. After

a few seconds, the display “– USb –“ will appear. Play-

back then begins. “ “, MP3, the current track and the

elapsed playing time of the current track will be shown in

the display.

For operation, please refer to the section “Description of the

controls”.

NOTE:

• Alwaysdirectly connect a USB storage medium to the

USB port to prevent any malfunctions.

• TheUSBportisnot designedforchargingexternal

devices.

CAUTION:

Before removing the USB storage device, switch the device

to another mode using the SOURCE button (9).

Description of the controls

(3/13)

You can pause and continue music playback. Press again to

continue playback.

(4/6)

Press1x= Restartofthesongfromthebeginning.(Only

in Bluetooth mode)

Press2x= Skiptotheprevioussong.

Press3x= Skiptothesongbeforetheprevioussong.

NOTE:

The number of the current title is displayed brieﬂy.

(4/6)

Presstoskiptothenextsongandthefollowingsongs.

NOTE:

The number of the current title is displayed brieﬂy.

/ (10 /14) (Only in USB mode)

Press1x= Amusicscanisstarted.

Press2x= Thescanisstoppedandnormalplayback

is continued.

REPEAT (1 on the remote control) (Only in USB mode)

Activates the Repeat function.

Press1x= Thecurrenttitleisplayedbackrepeat-

edly. The symbol “

“ is shown.

Press2xn= Allthetracksarecontinuallyplayedback.

The message “ALL “ will be shown.

NOTE:

If the function is activated function, the individual tracks can

be selected with the / (4/6) buttons.

RANDOM (20 on the remote control)

Activates random playback. All titles are played back in a ran-

dom sequence. The message “rANd”, the current title and

the elapsed play time are alternately shown on the display.

To deactivate the function again, press the RANDOM button

again. The message “OFF” will be brieﬂy shown on the

display.

NOTE:

The “RANDOM” function cannot be combined with the

“REPEAT” function.

Cleaning

CAUTION:

Do not submerge the device in water.

• Beforecleaningdisconnectfrommainspowersupply.

• Cleanthedevicewithasoftdampclothwithoutdeter-

gents.

English

Troubleshooting

Fault Cause Solution

Unit cannot be

operated.

Unit crashes

and “hangs”.

Disconnect from the

mains for around

5 seconds. Then switch

the unit on again.

Perform a factory reset.

see page 6 “Restoring

the factory defaults”

No audio signal

via the Bluetooth

connection

Speaker is not

paired to the

audio source.

Check whether a connec-

tionexists.Ifnecessary,

pair the speaker again to

the audio source.

Volume too

low

Increase the volume on

the speaker

Increase the volume on

the audio source.

Speaker cannot

be connected

Pairing does

not work

Check whether the audio

source supports the A2DP

protocol.

Audio source

is switched off

Switch on the audio

source

Bluetooth is

switched off

at the audio

source.

Switch on the Bluetooth

function in the audio

source.

Bluetooth

version is not

supported.

Use a different playback

unit.

Music tracks

are played

back via USB

in the wrong

sequence.

Random

playback is

activated.

Press the RANDOM but-

ton. The “OFF” display

is brieﬂy shown on the

display.

Technical Speciﬁcationsn

Model: SY-X250BT

Power supply: ......................................................220-240 V~ 50 Hz

Power Consumption:................................................................60 W

Protection class: ................................................................................ II

Net weight: ..............................................................approx.7.20kg

Radio component

Frequency range: .................................... FM 87.5 ~ 108 MHz

Bluetooth

Bluetooth support: V2.1 + EDR / V1.1

Range:

..................................................................approx.10metres

Transmission frequency:

......................................................2.4 GHz

Protocols:

....................................................................A2DP, AVRCP

The right to make technical and design modiﬁcations in

the course of continuous product development remains

reserved.

This device has been tested according to all relevant current

CE guidelines, such as electromagnetic compatibility and low

voltage directives, and has been constructed in accordance

with the latest safety regulations.

Disposal

Meaning of the “Wheelie Bin” Symbol

Take care of our environment, do not dispose of electrical

applicances via the household waste.

Dispose of obsolete or defective electrical appliances via

municipal collection points.

Please help to avoid potential environmental and health

impacts through improper waste disposal.

You contribute to recycling and other forms of utilization of

old electric and electronic appliances.

Your municipality provides you with information about col-

lecting points

Capacity:..................................................................

32 GB

...........................................

........

............................................................................

Manufacturer: Satyatrade S. L.

Address: Pol. Ind. La Raya. C/ Guadalquivir, 2.

Camarma de Esteruelas, 28816 Madrid

Tel: 902 430 967

Fax: 91 8864285

NIF: B83254763

Manufacturing Country: China

Sytech® SY-X250BT

Description: Bluetooth Speaker

Sytech declares under their responsibility that the above indicated product fully

complies with the following directives

Directive: 2004/108/EC EMC. (Electromagnetic Compatibility Directive)

EN55013:2001+A1:2003+A2:2006

EN61000-3-2:2006+A1:2009+A2:2009

EN61000-3-3:2008

EN55020:2007+A11:2011

Directive Low Voltage LVD.

EN60065:2002+A1:2006+A2:2010+A11:2008+A12:2011

Directive ERM (Electromagnetic compatibility and Radio spectrum matters)

ETSI EN 300 328 V1.7.1 (2006-10)

ETSI EN 301 489-1 V1.9.2 (2011-09)

ETSI EN 301 489-17 V2.1.1 (2009-05)

ETSI EN 62479 (2010)

RoHS standard: 2011/65/EU. Restriction of hazardous substance.

Firmado: Ajeet Nebhwani Utamchandani

Administrador único



Page is loading ...

Sytech SYX250BT Owner's manual

Brand: Sytech

Model: SYX250BT

Category: Portable speakers

Type: Owner's manual

Download PDF

report

in other languages

español: Sytech SYX250BT El manual del propietario

Sytech SYX250BT Owner's manual

Sytech SYX250BT Owner's manual

in other languages

Related papers

Other documents