Adaptec 6805Q with maxCache™ 2.0 User guide

Brand: Adaptec

Model: 6805Q with maxCache™ 2.0

Type: User guide

Adaptec Event Monitor

User's Guide

CDP-00281-02-A Rev A

Issue: November 22, 2013

The information in this document is proprietary and condential to

PMC-Sierra, Inc. In any event, no part of this document may be reproduced

or redistributed in any form without the express written consent of

PMC-Sierra, Inc.

CDP-00281-02-A Rev A, Issue 1

None of the information contained in this document constitutes an express

or implied warranty by PMC-Sierra, Inc. as to the sufciency, tness or

suitability for a particular purpose of any such information or the tness, or

suitability for a particular purpose, merchantability, performance, compatibility

with other parts or systems, of any of the products of PMC-Sierra, Inc., or any

portion thereof, referred to in this document. PMC-Sierra, Inc. expressly

disclaims all representations and warranties of any kind regarding the contents

or use of the information, including, but not limited to, express and implied

warranties of accuracy, completeness, merchantability, tness for a particular

use, or non-infringement.

In no event will PMC-Sierra, Inc. be liable for any direct, indirect, special,

incidental or consequential damages, including, but not limited to, lost prots,

lost business or lost data resulting from any use of or reliance upon the

information, whether or not PMC-Sierra, Inc. has been advised of the

possibility of such damage.

For a complete list of PMC-Sierra’s trademarks and registered trademarks,

visit: http://www.pmc-sierra.com/legal/.

Other product and company names mentioned herein may be the trademarks

of their respective owners.

2Proprietary and Condential to PMC-Sierra, Inc. and for its customers' internal use only.

Document No.: CDP-00281-02-A Rev A, Issue 1

Adaptec Event Monitor User's Guide

Revision History

Details of ChangeIssue DateIssue

Converted to XMLNovember 12,

2013

3Proprietary and Condential to PMC-Sierra, Inc. and for its customers' internal use only.

Document No.: CDP-00281-02-A Rev A, Issue 1

Adaptec Event Monitor User's Guide

Contents

Adaptec by PMC Product Support..............................................................................................................................6

Software License Agreement......................................................................................................................................8

1 Overview...............................................................................................................................................................11

2 Installing and Uninstalling Adaptec Event Monitor...............................................................................................12

System Requirements..................................................................................................................................12

Using Adaptec Event Monitor with a Firewall..............................................................................................12

Installing on Windows..................................................................................................................................12

Performing a Silent Windows Installation....................................................................................................13

Windows Command Line Properties and Examples........................................................................14

Installing on Red Hat Linux and Cent OS......................................................................................................15

Installing on Debian Linux and Ubuntu Linux...............................................................................................15

Installing on FreeBSD...................................................................................................................................15

Uninstalling Adaptec Event Monitor............................................................................................................15

3 Stopping and Starting the Adaptec Event Monitor Service...................................................................................17

4 Conguring Adaptec Event Monitor.....................................................................................................................18

5 Email Notications in Linux Event Monitor...........................................................................................................19

6 Adaptec Event Monitor Log Files..........................................................................................................................20

7 Frequently Asked Questions.................................................................................................................................21

8 More Information.................................................................................................................................................22

4Proprietary and Condential to PMC-Sierra, Inc. and for its customers' internal use only.

Document No.: CDP-00281-02-A Rev A, Issue 1

Adaptec Event Monitor User's Guide

List of Tables

Table 1: Windows Command Line Exit Codes .....................................................................................................14

Table 2: Optional Command Line Properties ......................................................................................................14

vProprietary and Condential to PMC-Sierra, Inc. and for its customers' internal use only.

Document No.: CDP-00281-02-A Rev A, Issue 1

Adaptec Event Monitor User's Guide

Adaptec by PMC Product Support

If you have questions about installing or using your Adaptec by PMC product, check this document

rst—you will nd answers to most of your questions. If you need further assistance, use the support

options listed below. To expedite your service, have your computer in front of you.

Note: The phone numbers below are subject to change. Please visit the Support

section of www.adaptec.com for the most up to date contact information.

Technical Support Identication (TSID) Number

• Before contacting Technical Support, you need your product unique TSID number. The TSID number

identies your product and support status.

• The TSID number is included on a white, bar-coded label, like this example:

• It's recommended that you register your product so that you have easy access to your TSID when

contacting product support.

Self Help and Support in English

• Visit our Web site at www.adaptec.com.

• Search the Adaptec Support Knowledgebase (ASK) at ask.adaptec.com for articles, troubleshooting

tips, and frequently asked questions for your product.

• For support via e-mail, submit your question at ask.adaptec.com.

• To speak with a Technical Support Specialist, call +1 408 934 7274 or +49 89 4366 5544 or +44 845

266 8773.

Technische Informationen und Support in Deutsch

• Besuchen Sie unsere Webseite www.adaptec.com/de-de

• Suchen Sie in der Adaptec Support Knowledgebase (ASK) unter ask-de.adaptec.com nach Artikeln,

Tipps zur Fehlerbehebung und häug gestellten Fragen zu Ihrem Produkt.

• Support per Email erhalten Sie unter ask-de.adaptec.com.

• Für telefonischen Support wählen Sie +49 89 4366 5522.

Техническая поддержка и информация на русском языке

• Посещаете наш сайт www.adaptec.com/ru-ru/.

• База знаний Adaptec (ASK) на сайте ask-ru.adaptec.com ask-ru.adaptec.com – статьи, советы по

устранению неисправностей и часто задаваемые вопросы о Вашем продукте.

• Для поддержки по электронной почте отправьте Ваш запрос на сайте ask-ru.adaptec.com

• Чтобы обратиться к специалисту технической поддержки по телефону, звоните на +7 499 918

7200 или +49 89 4366 5555.

日本語での技術情報とサポート

• 弊社のウェブサイト、www.adaptec.com/ja-jp をご覧ください。

• ask.adaptec.co.jp のAdaptec Support Knowledgebase (ASK)で、お使いの製品の情報トラブルシュー

ティングのヒント、よくある質問を検索してください。

• Eメールでのサポートには ask.adaptec.co.jp から質問を送ってください。

6Proprietary and Condential to PMC-Sierra, Inc. and for its customers' internal use only.

Document No.: CDP-00281-02-A Rev A, Issue 1

Adaptec Event Monitor User's Guide

Information Technique et d'assistance en Français

• Visitez notre site Web à l'adresse www.adaptec.com/fr-fr.

• Rechercher dans le base de connaissances Adaptec (ASK) ask-fr.adaptec.com pour des articles,

conseils de dépannage et les questions fréquemment posées pour votre produit.

7Proprietary and Condential to PMC-Sierra, Inc. and for its customers' internal use only.

Document No.: CDP-00281-02-A Rev A, Issue 1

Adaptec Event Monitor User's Guide

Software License Agreement

PLEASE READ CAREFULLY: THE USE OF THIS SOFTWARE IS SUBJECT TO THE SOFTWARE LICENSE TERMS

OF PMC-SIERRA, INC. AND OTHER LICENSORS WHOSE SOFTWARE MAY BE BUNDLED WITH THIS PRODUCT.

BY YOUR USE OF THE SOFTWARE INCLUDED WITH THIS PRODUCT YOU AGREE TO THE LICENSE TERMS

REQUIRED BY THE LICENSOR OF THAT SOFTWARE, AS SET FORTH DURING THE INSTALLATION PROCESS.

IF YOU DO NOT AGREE TO THE LICENSE TERMS APPLICABLE TO THE SOFTWARE, YOU MAY RETURN THE

ENTIRE UNUSED PRODUCT FOR A FULL REFUND.

In return for acquiring a license to use the PMC-Sierra software, which may include software from third

party licensors and patches made available by PMC-Sierra (“Software”), and the related documentation,

you agree to the following terms and conditions:

1. License. This Agreement grants you, the Licensee, a license to:

a. Use the Software on a single computer system, which is not intended for use by more than ve

(5) users; and:

b. Make one copy of the Software in machine readable form solely for back-up purposes, provided

you reproduce PMC-Sierra's copyright proprietary legends. Notwithstanding the foregoing, the

Software may be used on the home, laptop or other secondary computer of the principal user

of the Software, and an additional copy of the Software may be made to support such use. As

used in this license, the Software is “in use” when it is either loaded into RAM or installed on a

hard disk or other permanent memory device. The Software may be “in use” on only one computer

at any given time. (Different license terms and fees are applicable for networked or multiple user

applications.) As a specic condition of this license, you agree to use the Software in compliance

with all applicable laws, including copyright laws, and that you will not copy, transmit, perform

or distribute any audio or other content using the Software without obtaining all necessary

licenses or permissions from the owner of the content.

2. Restrictions. You may not distribute copies of the Software to others or electronically transfer the

Software from one computer to another over a network. You may not post or otherwise make

available the Software, or any portion thereof, in any form, on the Internet. You may not use the

Software in a computer service business, including in time sharing applications. The Software contains

trade secrets and, in order to protect them, you may not decompile, reverse engineer, disassemble,

or otherwise reduce the Software to a human-perceivable form. YOU MAY NOT MODIFY, ADAPT,

TRANSLATE, RENT, LEASE, LOAN, RESELL FOR PROFIT, DISTRIBUTE, NETWORK OR CREATE DERIVATIVE

WORKS BASED UPON THE SOFTWARE OR ANY PART THEREOF.

3. Ownership of Software. As Licensee, you own the media upon which the software is recorded or

xed, but PMC-Sierra and its licensors retain title and ownership of the Software recorded on the

original media and all subsequent copies of the Software, regardless of the form or media in which

or on which the original and other copies may exist. This license is not a sale of the Software or any

copy.

4. Condentiality. You agree to maintain the Software in condence and that you will not disclose the

Software to any third party without the express written consent of PMC-Sierra. You further agree

to take all reasonable precautions to preclude access of unauthorized persons to the Software.

5. Term. This license is effective until January 1, 2045, unless terminated earlier. You may terminate

the license at any time by destroying the Software (including the related documentation) together

with all copies or modications in any form. PMC-Sierra will have the right to terminate our license

immediately if you fail to comply with any term or condition of this Agreement. Upon any termination,

including termination by you, you must destroy the Software (including the related documentation),

together with all copies or modications in any form.

6. Special Terms Applicable to Databases. Where a database is included with the Software, you

acknowledge that it is licensed only in connection with the use of the Software to perform disc

creation, and that the database and all data derived therefrom must be maintained in condence

in accordance with the provisions of Section 4. This license does not grant you any rights to distribute

or disclose such database or data.

8Proprietary and Condential to PMC-Sierra, Inc. and for its customers' internal use only.

Document No.: CDP-00281-02-A Rev A, Issue 1

Adaptec Event Monitor User's Guide

7. Limited Warranty. PMC-Sierra and its Licensor warrant only that the media upon which the Software

is furnished will be free from defects in material or workmanship under normal use and service for

a period of thirty (30) days from the date of delivery to you. PMC-SIERRA AND ITS LICENSORS DO

NOT AND CANNOT WARRANT THE PERFORMANCE OR RESULTS YOU MAY OBTAIN BY USING THE

SOFTWARE OR DOCUMENTATION. THE FOREGOING STATES THE SOLE AND EXCLUSIVE REMEDIES

PMC-SIERRA AND ITS LICENSORS WILL PROVIDE FOR BREACH OF WARRANTY. EXCEPT FOR THE

FOREGOING LIMITED WARRANTY, PMC-SIERRA AND ITS LICENSORS MAKE NO WARRANTIES,

EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED, AS TO NON-INFRINGEMENT OF THIRD PARTY

RIGHTS, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow the

exclusion of implied warranties or limitations on how long an implied warranty may last, so the

above limitations may not apply to you. This warranty gives you specic legal rights and you may

also have other rights which vary from state to state.

8. The entire liability of PMC-Sierra and its licensors, and your exclusive remedy for a breach of this

warranty, shall be:

a. The replacement of any media not meeting the above limited warranty which is returned to

PMC-Sierra; or:

b. if PMC-Sierra or its distributor is unable to deliver replacement media which is free from defects

in materials or workmanship, you may terminate this Agreement by returning the Software and

your money will be refunded.

9. Limitation of Liability. IN NO EVENT WILL PMC-SIERRA OR ITS LICENSORS BE LIABLE TO YOU FOR ANY

INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES, INCLUDING ANY LOST PROFITS, LOST SAVINGS,

OR LOSS OF DATA, EVEN IF PMC-SIERRA OR A LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES, OR FOR ANY CLAIM BY ANY OTHER PARTY. Some states do not allow the exclusion

or limitation of special, incidental, or consequential damages, so the above limitation or exclusion

may not apply to you.

10. Export. You acknowledge that the laws and regulations of the United States and other countries

may restrict the export and re-export of the Software. You agree that you will not export or re-export

the Software or documentation in any form in violation of applicable United States and foreign law.

11. Government Restricted Rights. The Software is subject to restricted rights as follows. If the Software

is acquired under the terms of a GSA contract: use, reproduction or disclosure is subject to the

restrictions set forth in the applicable ADP Schedule contract. If the Software is acquired under the

terms of a DoD or civilian agency contract, use, duplication or disclosure by the Government is subject

to the restrictions of this Agreement in accordance with 48 C.F.R. 12.212 of the Federal Acquisition

Regulations and its successors and 49 C.F.R. 227.7202-1 of the DoD FAR Supplement and its successors.

12. General. You acknowledge that you have read this Agreement, understand it, and that by using the

Software you agree to be bound by its terms and conditions. You further agree that it is the complete

and exclusive statement of the agreement between PMC-Sierra and you, and supersedes any proposal

or prior agreement, oral or written, and any other communication between PMC-Sierra and you

relating to the subject matter of this Agreement. No additional or any different terms will be

enforceable against PMC-Sierra unless PMC-Sierra gives its express consent, including an express

waiver of the terms of this Agreement, in writing signed by an ofcer of PMC-Sierra. You assume

full responsibility for the use of the Software and agree to use the Software legally and responsibly.

This Agreement shall be governed by California law, except as to copyright matters, which are covered

by Federal law. This Agreement is deemed entered into at Sunnyvale, California by both parties.

Should any provision of this Agreement be declared unenforceable in any jurisdiction, then such

provision shall be deemed severable from this Agreement and shall not affect the remainder hereof.

All rights in the Software not specically granted in this Agreement are reserved by PMC-Sierra.

Should you have any questions concerning this license, contact:

PMC-Sierra, Inc.

Legal Department

1380 Bordeaux Drive

9Proprietary and Condential to PMC-Sierra, Inc. and for its customers' internal use only.

Document No.: CDP-00281-02-A Rev A, Issue 1

Adaptec Event Monitor User's Guide

Sunnyvale, CA 94089

(408) 239-8000

10Proprietary and Condential to PMC-Sierra, Inc. and for its customers' internal use only.

Document No.: CDP-00281-02-A Rev A, Issue 1

Adaptec Event Monitor User's Guide

1 Overview

The Adaptec Event Monitor Utility is a software application that monitors and manages the Adaptec by

PMC storage controllers installed on your system. Its job is to monitor system health, send notications,

and manage task schedules and other on-going processes. It sends notices when tasks are completed

successfully, such as the creation of a logical drive, and sounds an alarm when errors or failures occur.

The Adaptec Event Monitor Utility runs on Windows and Linux systems (see System Requirements on

page 12 for details). Once it is installed, it runs in the background with no user intervention.

When you install the Adaptec Event Monitor Utility, the Adaptec Command Line Interface tool, ARCCONF,

is installed automatically. The CLI tool allows you to build and manage your storage space; create logical

drives; add redundancy to protect your data; check status; recover from a failed physical device; rebuild

logical drives; and more. See Frequently Asked Questions for related documentation.

11Proprietary and Condential to PMC-Sierra, Inc. and for its customers' internal use only.

Document No.: CDP-00281-02-A Rev A, Issue 1

Adaptec Event Monitor User's Guide

2 Installing and Uninstalling Adaptec Event Monitor

The Adaptec Event Monitor Utility is distributed on a single Installation CD. You can install the Adaptec

Event Monitor Utility using the interactive Installation wizard. Or you can perform a “silent” installation

from the command line without messages or user interaction. The silent installation method is suitable

for scripted or “batch” installations across multiple machines.

Note: You must install the Adaptec Event Monitor Utility on every system that will

be part of your storage space.

System Requirements

To install the Adaptec Event Monitor Utility, each machine must meet these requirements:

• 20 MB of free disk space

• CD-ROM drive or DVD-ROM drive

• Adaptec by PMC storage controller

• One of these operating systems:

• Microsoft Windows Server 2012, 2008, 2008 R2, 2003, 2003 R2 (32-bit or 64-bit)

• Red Hat Enterprise Linux 6.3, 5.9 (32-bit or 64-bit)

• CentOS 6.3, 5.9 (32-bit or 64-bit)

• FreeBSD 9.0, 8.0, 7.4 (32-bit or 64-bit)

• Ubuntu Linux 12.04, 11.10, 10.04 (32-bit or 64-bit)

• Debian Linux 6 (32-bit or 64-bit)

Using Adaptec Event Monitor with a Firewall

If your system or network includes a rewall, you must unblock the following ports:

• 8003 (TCP)

• 34580 (TCP)

• 34570 to 34579 (TCP)

• 34570 (UDP)

• 34577 to 34580 (UDP)

For details on unblocking ports, refer to your operating system documentation.

Installing on Windows

Note: You need administrator privileges to install the Adaptec Event Monitor Utility.

For details on verifying privileges, refer to your operating system documentation.

To install the Adaptec Event Monitor Utility on Windows systems:

1. Insert the Adaptec Event Monitor Installation CD.

The Installation wizard opens automatically. (If it does not open, browse to the CD in Windows

Explorer, then click Autorun.)

2. Click Next to begin the installation, click I accept the terms..., and then click Next.

3. Select EventMonitor, accept the default installation directory or click Change... to select a different

installation directory; and then click Next.

12Proprietary and Condential to PMC-Sierra, Inc. and for its customers' internal use only.

Document No.: CDP-00281-02-A Rev A, Issue 1

Adaptec Event Monitor User's Guide

Note: To check disk space availability, click Space, review disk space usage, and

then click OK.

4. Click Install, and then click Finish.

5. Repeat these steps to install the Adaptec Event Monitor Utility on every Windows system that will

be part of your storage space.

Performing a Silent Windows Installation

You will need the Adaptec Event Monitor Installation CD to complete this task.

To complete a silent Windows installation:

1. Insert the Adaptec Event Monitor Installation CD into your CD (or DVD) drive.

2. Open a command prompt window and change to the CD root directory.

3. Run the silent installation from the command line using the 32-bit or 64-bit installer program, as

appropriate:

• If using the 32-bit installer program, run EventMonitorInstaller_x86.exe.

• If using the 64-bit installer program, run EventMonitorInstaller_x64.exe.

For a silent installation, the installer has the following form:

EventMonitorInstaller_x64.exe [ INSTALLDIR=<path> ] [ LOGDIR=<path> ] [

ADDLOCAL=<properties> ]

See Windows Command Line Properties and Examples for a description of the command line options.

After a minute or two, the silent installation should be complete. You may need to reboot the system

if instructed to do so in the install log (see next step).

4. Check the install log, at <LOGDIR>\eventmonitor_install.log, to verify that the installation

completed successfully. The exit codes, shown below, indicate if you need to take further action to

complete the installation.

13Proprietary and Condential to PMC-Sierra, Inc. and for its customers' internal use only.

Document No.: CDP-00281-02-A Rev A, Issue 1

Adaptec Event Monitor User's Guide

Table 1: Windows Command Line Exit Codes

MeaningValueCode

The installation was successful.

No reboot is required.

0SUCCESS

The installation was not

successful.

1FAILURE_GENERAL

The installation was successful,

but a reboot is required.

2SUCCESS_REBOOT

Required hardware is not

present, the software is up to

3SUCCESS_NOT_REQUIRED

date, or there is nothing to

install.

Note: For more information about the success or failure of the installation, check

the detailed installation log at <LOGDIR>\adaptec.log. If the installation failed,

you will nd detailed information to help you diagnose the problem.

5. Repeat these steps to install the Adaptec Event Monitor Utility on every Windows system that will

be part of your storage space.

Windows Command Line Properties and Examples

A command-line installation (or “silent” installation) uses command-line parameters to complete an

installation without messages or user interaction.

Command Line Properties

Table 2: Optional Command Line Properties

ValuesProperty

Species the installation path. For example:INSTALLDIR

INSTALLDIR=C:\Adaptec\EventMon(Optional)

Note: If you do not set the installation path, the installer uses

the following default path:

C:\Program Files\Adaptec\Adaptec Event Monitor

Species the installation log path. For example:LOGDIR

LOGDIR=C:\Adaptec\EventMon\InstallLogs(Optional)

Note: If you do not set the installation log path, the installer

uses the following default path:

C:\PMCS\Logs

ADDLOCAL

Note: Use commas to separate multiple values.

(Optional)

• ALL—Installs all of the following features. If you specify ALL, do not also

specify any of the following values.

• EventMonitor—Installs the Adaptec Event Monitor.

• CLITools—Installs the Command Line Interface tool (ARCCONF).

Example Command Line Installations

• To install the Adaptec Event Monitor, CLI tools (ARCCONF), and installation logs in the default location:

EventMonitorInstaller_x64.exe

14Proprietary and Condential to PMC-Sierra, Inc. and for its customers' internal use only.

Document No.: CDP-00281-02-A Rev A, Issue 1

Adaptec Event Monitor User's Guide

• To install the Adaptec Event Monitor, CLI tools, and installation logs to a different installation path:

EventMonitorInstaller_x64.exe INSTALLDIR=C:\Adaptec\EventMon

LOGDIR=C:\Adaptec\EventMon\InstallLogs

• To install the Adaptec Event Monitor and CLI tools to the default location and the installation logs

to a different installation path:

EventMonitorInstaller_x64.exe LOGDIR=”C:\Program Files\Adaptec\Adaptec Event

Monitor\InstallLogs”

Note: Be sure to enclose the installation path in double quotes if the pathname

includes spaces (as in the example above). Do not include a trailing \ on the leaf

directory, however, for example InstallLogs\”; it will be interpreted as an

escape sequence for the outside quote.

• To install just the CLI tools on a 32-bit Windows system:

EventMonitorInstaller_x86.exe ADDLOCAL=CliTools

Installing on Red Hat Linux and Cent OS

For Red Hat Linux and Cent OS, the Adaptec Event Monitor package consists of a RPM le. You can install

the RPM package by double clicking the le in a GUI interface. Alternatively, run the RPM command

from the Linux shell:

rpm -ivh EventMonitor-1.02-20425.i386.rpm (32-bit)

rpm -ivh EventMonitor-1.02-20425.x86_64.rpm (64-bit)

Once the RPM is installed, the les are stored under /usr/Adaptec_Event_Monitor. This directory

also includes the Adaptec Command Line Utility ARCCONF, which allows you to congure your RAID

storage. The installation creates a user process called ‘EventMonitor’, which runs on the system that

will monitor the Adaptec storage controller for events.

Installing on Debian Linux and Ubuntu Linux

For Debian and Ubuntu Linux, the Adaptec Event Monitor is distributed as a .deb package. You can

install the .deb package from the Linux shell with these commands:

dpkg –i EventMonitor-1.03-20624_i386.deb (32-bit)

dpkg –i EventMonitor-1.03-20624_amd64.deb (64-bit)

Once the DEB package is installed, the les are stored under /usr/Adaptec_Event_Monitor. This

directory also includes the Adaptec Command Line Utility ARCCONF, which allows you to congure your

RAID storage. The installation creates a user process called ‘EventMonitor’, which runs on the system

that will monitor the Adaptec storage controller for events.

Installing on FreeBSD

For FreeBSD, use the pkg_add command to install the Adaptec Event Monitor:

pkg_add Adaptec_Event_Monitor-1.03-20624-x86.pkg.tbz (32-bit)

pkg_add Adaptec_Event_Monitor-1.03-20624-amd64.pkg.tbz (64-bit)

Once the package is installed, the les are stored under /opt/Adaptec_Event_Monitor. This directory

also includes the Adaptec Command Line Utility ARCCONF, which allows you to congure your RAID

storage. The installation creates a user process called ‘EventMonitor’, which runs on the system that

will monitor the Adaptec storage controller for events.

Uninstalling Adaptec Event Monitor

To uninstall Adaptec Event Monitor, follow the instructions for your operating system.

Note: If a previous version of Adaptec Event Monitor is installed on your system, you

must remove it before beginning a new installation.

15Proprietary and Condential to PMC-Sierra, Inc. and for its customers' internal use only.

Document No.: CDP-00281-02-A Rev A, Issue 1

Adaptec Event Monitor User's Guide

Uninstalling on Windows

To uninstall Adaptec Event Monitor from a Windows system, use the Add or Remove Programs tool in

the Control Panel. All Adaptec Event Monitor components are uninstalled.

When the uninstall process is complete, you receive a conrmation message.

Uninstalling on Linux Red Hat or Cent OS

Type the command: rpm -e EventMonitor

When the uninstall process is complete, you receive a conrmation message.

Uninstalling on Debian Linux or Ubuntu Linux

Type the command: dpkg -r EventMonitor

When the uninstall process is complete, you receive a conrmation message.

Uninstalling on FreeBSD

To uninstall on a FreeBSD system:

1. Change to the /var/db/pkg directory:

cd /var/db/pkg

2. Type the command: pkg_delete Adaptec_Event_Monitor*

16Proprietary and Condential to PMC-Sierra, Inc. and for its customers' internal use only.

Document No.: CDP-00281-02-A Rev A, Issue 1

Adaptec Event Monitor User's Guide

3 Stopping and Starting the Adaptec Event Monitor Service

When you complete a Windows or Linux installation, the Adaptec Event Monitor service starts

automatically.

Stopping and Starting the Service on Windows

To stop the service, restart the service, or disable the service, use the services.msc program

(Administrative Tools) in the Windows Control Panel. The service name, highlighted in the gure below,

is Adaptec Event Monitor.

Stopping and Starting the Service on Linux and Unix

To stop and start the ‘EventMonitor’ process on a Linux system, use the following command:

/usr/Adaptec_Event_Monitor/EventMonitorService <start | stop>

To stop and start the ‘EventMonitor’ process on a FreeBSD system, use the following command:

/opt/Adaptec_Event_Monitor/EventMonitorService <start | stop>

17Proprietary and Condential to PMC-Sierra, Inc. and for its customers' internal use only.

Document No.: CDP-00281-02-A Rev A, Issue 1

Adaptec Event Monitor User's Guide

4 Conguring Adaptec Event Monitor

You can set the following property values in the Adaptec Event Monitor conguration le,

NRMConfig.ini, to control its behavior:

• nrm.eventQueueSize—the number of events to store before they are posted to the log les. The

default is 200:

nrm.eventQueueSize=200

• nrm.debugMask—the level of debug message output. The following values are supported:

nrm.debugMask=0 ; normal output. Only serious problems are logged (default)

nrm.debugMask=1 ; normal output + events logged to NRMEvents.log

nrm.debugMask=2 ; full debug output

• agent.OSLoggingLevel—the operating system event logging level. The following values are supported:

agent.OSLoggingLevel=0 ; no event logging

agent.OSLoggingLevel=1 ; error events only

agent.OSLoggingLevel=2 ; error and warning events

agent.OSLoggingLevel=3 ; error, warning, and informational events (default)

• agent.alarm—enable or disable the audible alarm. The following values are supported:

agent.alarm=on ; warning and informational events trigger the alarm (default)

agent.alarm=off ; alarm disabled

Note: The property value is not case-sensitive.

See the NRMConfig.ini le, in the installation directory, for a complete list of values for each property.

See Email Notications in Linux Event Monitor for more on event logging.

18Proprietary and Condential to PMC-Sierra, Inc. and for its customers' internal use only.

Document No.: CDP-00281-02-A Rev A, Issue 1

Adaptec Event Monitor User's Guide

5 Email Notications in Linux Event Monitor

The Email Notication feature in Adaptec Event Monitor for Linux allows you to send notication emails

based on the events reported by the Event Monitor utility. This feature is disabled by default; it can be

congured after Adaptec Event Monitor is installed. Once congured, the email notication feature

runs in the background with no user intervention.

Conguring Email Notications

The Adaptec Event Monitor package includes a script named configureEmailSettings.sh. Use this

script to congure the email notication settings below.

Note: The configureEmailSettings.sh script runs only on the bash shell.

• Enable Email Notication

Enables the Email Notication feature in Adaptec Event Monitor.

• Disable Email Notication

Disables the Email Notication feature in Adaptec Event Monitor.

• Get SMTP Server Details

Returns the current SMTP server settings.

• Set SMTP Server Details

Congures the SMTP server settings. Adaptec Event Monitor can store information about one SMTP

server only. If you already have an existing SMTP server setup, this option will overwrite the exiting

SMTP server settings with new settings. You can congure the following SMTP server details:

• SMTP Server Address—IP address of your SMTP Server.

• SMTP Server Port—port number on which your SMTP server is running.

• From Email Address—from email address.

• Secure SMTP Server—To use a secure SMTP server, choose ‘YES’ for this option. You will need

to provide a username and password for your SMTP server.

• Get Recipient Information

Displays the list of recipients who will receive email notications from Adaptec Event Monitor.

• Set Recipient Information

Sets the recipient information for users who receive notications from Adaptec Event Monitor,

including:

• Recipient’s Email Address—email address of the recipient.

• Email Notication Type—type of event(s) the recipient is notied of:

• I–If this option is selected, the recipient will receive emails for Error, Warning and Informational

events.

• W–If this option is selected, the recipient will receive emails for Error and Warning events.

• E–If this option is selected, the recipient will receive emails for Error events only.

• Update Recipient Information

Updates the notication type for a specic recipient.

• Delete Recipient Information

Deletes a specic recipient from the recipient list.

• Send Test Email

Sends a test email based on your SMTP server settings.

Note: After running the conguration script, restart Adaptec Event Monitor for

the conguration settings to take effect.

19Proprietary and Condential to PMC-Sierra, Inc. and for its customers' internal use only.

Document No.: CDP-00281-02-A Rev A, Issue 1

Adaptec Event Monitor User's Guide

6 Adaptec Event Monitor Log Files

Windows Log Files

The Adaptec Event Monitor logs events to the Windows Event Viewer (the operating system event

logging utility) and to the Event Monitor log les. The log les are available at the default log path for

an interactive installation (C:\PMCS\Logs), or the <LOGDIR> directory, for a silent installation. Events

are logged to NRMFSAEvents.log for error, warning, and informational events, and NRMFSADebug.log

for debug messages.

Linux and Unix Log Files

The Adaptec Event Monitor logs events to the Syslogs (/var/log/messages) and to the Event Monitor

log les. The Event Monitor log les are located under the /var/log directory. Events are logged to

NRMFSAEvents.log for error, warning, and informational events, and NRMFSADebug.log for debug

messages.

20Proprietary and Condential to PMC-Sierra, Inc. and for its customers' internal use only.

Document No.: CDP-00281-02-A Rev A, Issue 1

Adaptec Event Monitor User's Guide

Page is loading ...

Adaptec 6805Q with maxCache™ 2.0 User guide

Adaptec 6805Q with maxCache™ 2.0 User guide

Adaptec 6805Q with maxCache™ 2.0 User guide

Related papers

Other documents