Hitachi LE47EC06AU User manual

Category
LCD TVs
Type
User manual

This manual is also suitable for

Thank you for purchasing this HITACHI product.
To obtain the best performance and safety, please read this manual carefully.
Please keep this manual for future reference.
User Manual
LED LCD TV
LE42EC06AU
LE47EC06AU
LE55EC06AU
2
Thank you for purchasing this HITACHI LED LCD TV.
The instructions in this manual are described mainly with the remote control.
You can also use the buttons on the TV if they have the same names as those on the remote control.
To obtain the best performance and safety, please read this manual carefully.
Please keep this manual for future reference.
Important Safety Instructions
Cleaning and Maintenance
Common Phenomena of the TV Panel
3D Viewing
Position the TV Set
3
5
5
6
6
Preparation
Attach the TV Stand
General Wall Mount Guide
7
7
7
Functional Overview
Front Panel
Rear Panel
Remote Control
8
8
9
10
Connection
Connecting Antenna Cable
Connecting External Equipment
12
12
12
Basic Operation
Power On/Off
Input Source Selection
Volume Adjustment
On-Screen Display Selection and Adjustment
Channel Selection
Information Banner
Subtitle Selection
Electronic Programme Guide (EPG)
Schedule Recorder
Schedule Reminder
Viewing Schedule List
13
13
13
13
13
14
14
14
15
15
17
17
Initial setup & Home Menu
Initial setup
Home Menu
Network setting
Web Browser
13
13
13
13
13
PVR and Time Shift
PVR
Time Shift
18
18
18
3D Settings
3D Format
2D TO 3D
Off
Left righ
Top/Bottom
Frame sequence
3D to 2D
19
19
19
19
19
19
19
19
Menu Operation
Picture Menu
Audio Menu
Time Menu
Setup Menu
Function Menu
Lock Menu
20
20
20
21
21
21
22
Media Operation
Video Playback
Music Playback
Photo Viewer
Text Viewer
23
23
23
24
24
Troubleshooting 26
Specifications
RGB Input Signal Chart
27
27
Contents
Trademark Information
• HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks
of HDMI Licensing LLC.
3
Important Safety Instructions
Read Instructions
All the safety and operating instructions should
be read before the product is operated.
Retain Instructions
The safety and operating instructions should be
retained for future reference.
Heed Warnings
All warnings on the product and in the operating
instructions should be adhered to.
Follow Instructions
All operating and use instructions should be
followed.
Cleaning
Unplug the product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a dry cloth for cleaning.
Attachments
Only use attachments/accessories specified by
the manufacturer.
Water and Moisture
Do not use the product near water, for example,
near a bath tub, wash bowl, kitchen sink, or
laundry tub, in a wet basement, or near a
swimming pool, etc.
Accessories
Do not place the product on an unstable cart,
stand, tripod, bracket, or table. The product
may fall, causing serious injury to a child or
adult, and serious damage to the product. Use
only with a cart, stand, tripod, bracket, or table
recommended by the manufacturer, or sold
with the product. Any mounting of the product
should follow the manufacturer’s instructions and
should use a mounting accessory recommended
by the manufacturer. The product and cart
combination should be moved with care. Quick
stops, excessive force, and uneven surfaces
may cause the product and cart combination to
overturn.
Ventilation
Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation
of the product and to protect it from overheating,
and these openings must not be blocked or
covered. The openings should never be blocked
by placing the product on a bed, sofa, rug, or
other similar surface. The product should not
be placed in a built-in installation such as a
bookcase or rack unless proper ventilation is
provided or the manufacturer’s instructions have
been adhered to.
Power Sources
The product should be operated only from the
type of power source indicated on the marking
label. If you are not sure of the type of power
supply to your home, consult your appliance
dealer or local power company.
Power Cord Protection
Power cords should be routed so that they are not
likely to be walked on or pinched by items placed
upon or against them, paying particular attention
to cords at plugs, convenience receptacles, and
the point where they exit from the appliance.
Lightning
For added protection for the product during a
lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from
the wall outlet and disconnect the antenna or
cable system. This will prevent damage to the
product due to lightning and power-line surges.
Power Lines
An outside antenna system should not be located
in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall
into such power lines or circuits. When installing
an outside antenna system, extreme care should
be taken to keep from touching such power lines
or circuits as contact with them might be fatal.
Overloading
Do not overload wall outlets and extension cords
as this can result in a risk of fire or electric shock.
Object and Liquid Entry
Never push objects of any kind into the product
through any openings as they may touch
dangerous voltage points or short-out parts that
can result in a fire or electric shock. Never spill
liquid of any kind on the product.
Servicing
Do not attempt to service the product yourself as
opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
Repairing
Unplug the product from the wall outlet and refer
servicing to qualified service personnel under the
following conditions:
When the power cord or plug is damaged.
If liquid has been spilled, or objects have fallen
into the product.
If the product has been exposed to rain or water.
4
If the product does not operate normally by
following the operating instructions. Adjust
only those controls that are covered by
the operating instructions as an improper
adjustment of other controls may result in
damage and will often require extensive work
by a service technician to restore the product
to its normal operation.
If the product has been dropped or damaged
in any way.
When the product exhibits a distinct change in
performance this indicates a need for service.
Replacement Parts
When replacement parts are required, be sure
the service technician has used replacement
parts specified by the manufacturer or have
the same characteristics as the original part.
Unauthorized substitutions may result in fire,
electric shock or other hazards.
Safety Check
Upon completion of any service or repairs to the
product, ask the service technician to perform
safety checks to determine that the product is in
proper operating condition.
Heat
Do not install the product near any heat sources
such as radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat.
Installation Location
Ensure the television is not overhanging the
edge of the supporting furniture and only use
furniture that can safely support the television.
Do not stand the TV on cloth or other materials
placed between the television and supporting
furniture.
Place the product on a firm and flat surface.
Do not place the television on tall furniture(for
example cupboards or bookcases) without
anchoring both the furniture and the television
to a suitable support.
Avoid placing the product in areas of
direct sunlight, heating radiators, closed
automobiles, high temperature, high humidity,
excessive dust, strong vibration, impact or
strong magnetic fields, as the internal parts
may be seriously damaged.
Hazards of Electrical Shock and Fire
Do not touch the power cord with wet hands.
Hold the plug when disconnecting the power
cord. Do not pull the power cord. Unplug the
power cord from the wall socket outlet when the
product is not used for long periods of time.
Hearing Safety
Listen at a moderate volume. Using headphones
at high volume can impair your hearing.
Handling the product
Be careful when handling the product. Do not
drop, hit any objects or scratch the frame or
stand. These actions may damage the frame
and stand.
WARNING
• The appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a
person responsible for their safety.
• Young children should be supervised to ensure they
do not play with the appliance.
CAUTION
• Do not let your child’s finger get caught in the gap
between the TV stand and the table surface. It may
cause injury to the child’s finger.
Important Safety Instructions
Secure the TV Set
This TV is equipped with standard wall-mounting
points, and we recommend that a wall bracket be
installed between the TV and the wall to prevent
the TV from falling from a cabinet.
• The wall bracket is not supplied.
5
Cleaning and Maintenance
Cleaning the TV Panel
Wipe the TV panel with a dry lint-free cloth in
order to prevent damage to the panel surface.
In case of greasy dirt, wipe gently with a lint-free
cloth slightly moistened with water.
• Do not use a chemical cloth or spray cleaner. It
may cause discolouration and damage to the
panel surface.
• Do not use a dusty or hard cloth and rub the
screen hard. It may cause scratches on the
panel surface.
Cleaning the Cabinet
Wipe the cabinet with a lint-free cloth. In case
of heavy dirt, wipe with a soft cloth slightly
moistened with water.
• Do not use a dusty cloth and rub the cabinet
surface. It may cause scratches on the cabinet
surface.
• Do not use chemicals such as benzene, thinner
or other chemical products. Do not spray
volatile solutions such as insecticide over the
cabinet. Using these chemicals may result
in cabinet material degradation or coating
removal.
• Do not leave the cabinet in prolonged contact
with plastic or rubber materials. It may cause
cabinet material degradation or coating
removal.
CAUTION
• Disconnect the power plug from the wall socket outlet before cleaning the product.
Important Safety Instructions
Common Phenomena of the TV Panel
Defective Spots on TV Panel
The TV panel is manufactured with high-
precision technology. It consists of large
number of pixels. However, some of them may
appear constantly on the screen as black spots,
brilliant spots of light (red, green or blue) and/or
illuminated spots (pixel of white colour).
Residual Image
When a still image or On Screen Display menu
is displayed on the screen for a short time
(about a minute) and then switched to another
image, it may leave an “after-image” on the
screen. The residual image will disappear on
its own.
Surface on TV Panel
The TV panel is made with fine processing
glass. Therefore do not impact strongly on the
panel surface as this may cause damage to it.
The Usage Under Low Temperature
Environment
Due to the structural characteristics of the TV
panel, the response speed of the TV panel
becomes slower when the ambient temperature
around the panel becomes too low. In some
cases, it may cause the residual image. The
residual image will disappear on its own as the
temperature goes up and back to normal.
The following are common phenomena when operating the TV panel. This is a structural property of the
TV panel that is adapted to the industry standards and will have no impact on the performance of the
product.
6
Important Safety Instructions
3D Viewing
With 3D viewing technology, images taken from
slightly different positions are pulsed in very fast
sequence into each eye, creating an illusion
of depth if viewed with the special glasses that
are supplied with this TV set. It is important to
wear these glasses when viewing in 3D mode
as otherwise the 3D images will appear blurry
and colours out of alignment. If you normally
wear glasses, just fit the 3D glasses over your
prescription glasses.
CAUTION:
Wearing of 3D glasses for an extended time
may cause a headache, fatigue or dizziness in
certain people.
If you are concerned about these potential
effects of 3D viewing, avoid prolonged viewing
and use your own judgment to avoid eye strain
and/or headache or dizziness.
If your eyes show signs of fatigue or dryness,
stop 3D viewing and rest. Do not resume
3D viewing for at least 30 minutes after the
symptoms have subsided.
If you experience a headache, nausea,
dizziness or feel slightly disoriented while
viewing 3D, take frequent breaks or stop
watching and rest to lessen the potential of
these effects. Alternatively, take off the glasses
and continue normal viewing in 2D mode.
Consult your doctor, paediatrician or eye
specialist before allowing children under age 6
to watch 3D images.
Only allow older children to view 3D images
under adult supervision, and limit their viewing
time.
To ensure comfortable 3D viewing:
Make sure to wear the specially supplied 3D
glasses.
Make sure all 3D settings are appropriately set
on the TV (see pages 25-26 for details).
Sit at a comfortable distance away from the
screen. We recommend keeping a distance of
at least three times the height of the TV screen,
and installing the screen so your eyes are level
with the screen.
Limit your viewing time to 1 hour. For longer
movies, take a break of 10-15 minutes every
hour.
Block direct sunlight from your viewing area
and switch off any fluorescent lighting nearby.
Position the TV Set
Place the TV on a firm and flat surface, leaving
a space of at least 10cm around the TV set and
30cm from the top of the TV set to the wall or
cabinet.
• Place the TV set where it cannot be pulled, pushed
or knocked over.
7
Preparation
Attach the TV Stand
For model LE42EC06AU and LE47EC06AU only
screws
(
BM4x15
)
1
Make sure the 10 screws
are supplied with the TV.
BM4x15 (black)
BT4x14 (silver)
Attach the stand bracket to
the stand base as shown.
2
Carefully place the TV with its
front side facing down on a
cushioned flat surface.
3
Attach the TV stand to the
TV as shown.
Tighten the supplied screws
to fix the TV stand securely
in place.
5
screws
(
BT4x14
)
stand base
stand bracket
4
For model LE55EC06AU only
Tighten the supplied screws
to fix the TV stand securely
in place.
4
1
Make sure the 4 screws
are supplied with the TV.
Carefully place the TV with
its front side facing down
on a cushioned flat surface.
2
Attach the TV stand to the
TV as shown.
3
PM4x10 (silver)
CAUTION
• The TV stand may not be
fixed in place after repeatedly
tightening and loosening the
screws.
WARNING
• During assembling and
disassembling the TV stand,
please use your hand to support
it. Failure to do so may cause
the TV stand to fall and result in
personal injury.
• After installing the TV stand,
please ensure that the screws
are tightened firmly. Failure to
do so may cause the TV set to
tip over or become damage.
Tighten the supplied screws
to fix the TV stand securely
in place.
4
1
Make sure the 4 screws
are supplied with the TV.
Carefully place the TV with
its front side facing down
on a cushioned flat surface.
2
Attach the TV stand to the
TV as shown.
3
PM4x10 (silver)
Tighten the supplied screws
to fix the TV stand securely
in place.
4
1
Make sure the 4 screws
are supplied with the TV.
Carefully place the TV with
its front side facing down
on a cushioned flat surface.
2
Attach the TV stand to the
TV as shown.
3
PM4x10 (silver)
Tighten the supplied screws
to fix the TV stand securely
in place.
4
1
Make sure the 4 screws
are supplied with the TV.
Carefully place the TV with
its front side facing down
on a cushioned flat surface.
2
Attach the TV stand to the
TV as shown.
3
PM4x10 (silver)
General Wall Mount Guide
1
Unscrew and remove the
screws from the back cover
as shown.
For wall mount bracket
installation, refer to the wall
mount bracket installation guide.
2
Back cover
• Fasten the wall mount bracket to the TV using spacers and screws.
• The wall mount bracket is not supplied.
• Store the screws that are not in use.
• Screw hole size: M5
• Hole configuration: VESA 400x400mm
CAUTION
• Ensure the screw length is
within the length specification as
shown below. Failure to do so
may result in internal damage to
the TV set or cause it to fall.
LE32EC05AU: 16 - 20mm
LE24EC05AU: 8 - 10mm
Wall Mount Hook
Screw
Rear of TV Set
LE32EC05AU: 16 - 20m
m
LE24EC05AU: 8 - 10m
m
16 - 20mm
M4 x 10mm (short)
M5 x 22mm (long)
screws
(
BM4x15
)
1
Make sure the 10 screws
are supplied with the TV.
BM4x15 (black)
BT4x14 (silver)
Attach the stand bracket to
the stand base as shown.
2
Carefully place the TV with its
front side facing down on a
cushioned flat surface.
3
Attach the TV stand to the
TV as shown.
Tighten the supplied screws
to fix the TV stand securely
in place.
5
screws
(
BT4x14
)
stand base
stand bracket
4
8
M5 x 22mm
8
Functional Overview
Front Panel
Main Power Switch
Use it to switch the main
power on or off.
1
2
3
4
5
6
7
OnOff
1
Channel Up/Down ( / )
• Works as Up/Down cursor on TV menu.
2
Volume Up/Down ( / )
• Works as Left/Right cursor on TV menu.
3
Menu ( )
4
Input Select ( )
5
Power On/Standby ( )
6
Power/Standby Indicator
• Standby Mode - RED
• Power On - GREEN
7
Remote Control Sensor
• It takes approximately 15
seconds for the picture
to appear after the TV is
turned on.
• The TV will switch to
standby mode automatically
if there is no signal input for
15 minutes.
• If the TV will not be used
for a long period of time,
disconnect the power plug
from the wall socket outlet.
1
1 2 3 4 5
9
Rear Panel - LE42EC06AU
/
LE47EC06AU/LE55EC06AU
Functional Overview
1
Ethernet RJ45 Terminal
2
Media (USB) Input Terminal
3
HDMI
1 / HDMI 2 Input Terminal
4
RGB (PC) Input Terminal
5
RGB Audio Input Terminal
6
Antenna Input Terminal
7
Component Input Terminal
8
Audio Input for AV & Component Video
9
AV Input Terminal
10
HDMI 3
/
HDMI 4 Input Terminal
11
Headphones Jack
12
Media (USB) Input Terminal
13
S/PDIF Output Terminal
2
4
3
US B2
5V 500m A
8
7
10
1 2 3 4 5 6
1 2
US B1
5V 500mA
9
10
10
0
0
1010
10
3
8
9
10
10
11
12
13
7
654321
10
1 Power On/Standby: switch the TV on or to
standby mode.
2 Freeze: freeze the picture on the screen.
3 P.P: change the picture mode.
4 Sleep: turn the sleep timer on or off.
5 Home: open the Home menu.
6 T.Shift: start time shift function.
7 CH List: display the channel list.
8 Coloured buttons: depending on mode.
Red: PVR record in DTV mode
9 Fast Backward: fast reverse
10 Play/Pause: play or pause playback
11 Skip Backward: skip to the previous chapter/
track.
12 Index: display the recorded programs list
13 Browser: open internet browser
14 3D: display 3D menu options
15 Exit: exit the current menu]
16 Up/Down/Left/Right arrow buttons:
navigate the menu
17 OK: confirm the selection
18 Menu: open the menu options
19 Volume: adjust the volume up or down
20 Number buttons: choose channel directly
21 Info: display information about current source
22 Previous: go back to the previous channel
23 Input: switch between input sources
24 Channel: change channels up and down
25 Return: return to the previous menu
26 I/II: select the sound output
27 Skip Forward: skip to the next chapter/track
28 Subtitle: enable/disable subtitles in DTV
mode
29 Fast forward: fast forward through the
recording
30 Stop: stop playback
31 EPG: display the Electronic Program Guide
32 FAV: display the favourite channels list
33 Zoom: change aspect ratio
34 S.M: change sound mode
35 Mute: mute the sound output
12
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
24
25
23
26
27
28
29
30
31
32
33
34
35
Remote Control
11
Remote Control
Using the remote control
When using the remote control, aim it at the
remote control sensor at the front of the unit.
Make sure there are no large obstacles between
the remote control and the main unit.
Do not drop the remote control unit; do not
subject it to physical shocks.
Bright sunlight or lightning may cause erratic
operation.
Use of the unit near fluorescent lighting may
cause interference when using the remote
control. If the unit is displaying erratic behaviour,
move it away from any fluorescent lighting.
Keep the remote control dry. Wetting it may
cause malfunction.
Replace the batteries when remote control
operation deteriorates.
Battery precautions
Always follow the precautions below when using
batteries:
CAUTION: Danger of explosion! Ensure to insert
batteries according to the polarity markings.
Clean the battery contacts and those of the
device prior to installation.
Replace all batteries at the same time with fresh
batteries of the same size and type.
Do not mix old and new batteries, different types
of battery (alkaline, carbon-zinc or recharge-
able), or rechargeable batteries of different ca-
pacities. Mixing different types of battery could
cause leakage or rupture.
Remove the batteries when the unit is not in
use for a long time to avoid leakage. Batteries
can leak chemicals that can damage electronic
parts.
Dispose of batteries promptly and properly, ob-
serving any local hazardous waste regulations.
Do not burn or bury them.
Note that there are chargeable and noncharge-
able batteries. Do not attempt to charge non-
chargeable batteries.
Keep batteries away from children. If you sus-
pect a battery may have been swallowed, seek
immediate medical assistance.
Inserting Batteries
Place two AA size batteries in the remote control’s battery compartment, making sure to match the polar-
ity markings inside the compartment.
Open.
1
Make sure the
polarity is correct.
2
Close.
3
12
Connection
Connecting Antenna Cable
Connect the 75 ohm coaxial cable (commercially available) to the antenna input terminal.
• To obtain better picture quality, use an outdoor antenna.
• If your outdoor antenna uses 75 ohm coaxial cable with an F-type connector, connect it directly to the antenna input
terminal at the rear panel.
• If your outdoor antenna uses flat cable, connect it with a 75 ohm adapter (commercially available) and then to the
antenna input terminal at the rear panel.
Connecting External Equipment
You can select the appropriate connection depending on the equipment that you are connecting and the
level of picture quality you are trying to achieve. To view external source images, press to select
input source.
• Please refer to the user manual of the external equipment for more information on the connection to the TV.
• Please disconnect all the power supplies to the external equipment and TV before connection.
To use HDMI terminal
(rear)
(side)
HDMI Device
HDMI 
or
or
If the external equipment has DVI output, you can connect it to the HDMI terminal using a HDMI-DVI
cable. In case of using the HDMI-DVI cable, connect analogue audio signal to RGB audio input terminal.
Follow the above example when connecting your other devices by connecting the Output of your video
device to the related Input on the TV.
• The HDMI cable connector should
not exceed 20mm in width (W) and
10mm in height (H).
W
H
13
Basic Operation
Power On/Off
To switch on the TV
1
Press the main power switch located on the
underside of the TV.
The power indicator lights in red, indicating
that the TV is in standby mode.
2
Press .
The power indicator lights in green and the
TV switches on.
To switch off the TV
1
Press .
The power indicator lights in red and the
TV switches off to standby mode.
2
Press the main power switch located on the
underside of the TV to completely power off
the TV.
• It takes approximately 15 seconds for the picture to
appear after the TV is turned on.
• The TV will switch to standby mode automatically if
there is no signal input for 15 minutes.
• If the TV will not be used for a long period of time,
unplug the TV from the wall socket outlet.
Input Source Selection
To select input source
1
Press .
2
Press / to select the desired input source
(DTV, TV, AV, COMPONENT, PC-RGB,
HDMI1, HDMI2 , HDMI3, HDMI4).
3
Press OK to set your selection.
Volume Adjustment
To change the volume
1
Press to increase the sound volume.
2
Press to decrease the sound volume.
To mute the sound
1
Press MUTE to temporarily turn off the sound.
2
Press MUTE or to restore the sound to
previous level.
• You can decrease the sound volume by pressing
while the sound is muted.
On-Screen
Display
(OSD)
Selection and
Adjustment
1
Press to display the main menu.
2
Press / to select a menu.
The selected menu page displays.
3
Press / or OK to set your selection.
4
Press / to choose an item on the menu
page.
5
Press / to adjust an item value or choose
options.
6
Press to return to the previous menu
screen, or press repeatedly to exit the
menu.
• The OSD menu screen will be closed automatically
when no operation has been made for a certain
time.
14
Channel Selection
You can select channels in the following ways:
Using Channel Up/Down
1
Press / to select the next or previous
channel.
• The skipped channels cannot be selected by
/ button.
Using Channel List
1
Press CH.LIST to display the Channel List.
2
Press / to select the channel and press
OK.
Using Favourite Channel List
1
Press
FAV
to display the Favourite Channel
List.
2
Press / to select the channel and press
OK.
• See ‘Program Edit’ option on page 22 to create
list of favourite channels.
Using Number Buttons
1
Enter the channel number by using the
Number buttons and press OK.
• The channel is switched if the channel number is
valid.
Using Last Channel
1
Press to switch to the previous selected
channel.
2
Press again to switch back to the
current viewing channel.
• will not work if no channel has been changed
after the TV is turned on.
Information Banner
The information banner displays brief programme
information about the current programme. Each
time a channel is changed, the information
appears at the bottom of the screen.
To display information banner
1
Press INFO to display the information banner.
In DTV mode, the information banner may
contain:
• Channel number and name
• Current time
• Current programme name, start time and end
time
• Signal resolution
• Programme information (if available)
• Not all channels broadcast all programme
information data. Some channels do not provide
programme name and details. In such case, only
channel name is displayed.
Subtitle Selection
Some programmes are broadcast with subtitle
languages. You can select the desired subtitle
language.
To select subtitle language
1
Press SUBTITLE to display the Subtitle
Languages list.
2
Press / to select the desired subtitle
language and press OK.
Basic Operation
15
Electronic Programme
Guide (EPG)
An EPG is an on-screen guide of current and
future programmes. It also allows you to view
programme information, set recorder and set
reminders.
1
Press EPG to display the PROGRAMME
GUIDE screen.
Info o n
PROGRAMME GUIDE Time
18Jul 14:40
1 ONE
2 ABC1
3 SBS ONE
7 7 Digital
8 IN illawarra
9 NINE DIGITAL
10 TEN Digital
11 ELEVEN
Current Date and Time
Current Channel Name
and Programme Name
Press / to select the
top bar and press /
to change the display by
channel.
o
Info n
PROGRAMME GUIDE 18 Jul
CH 1 ONE
14:59-15:58
15:58-16:29
16:29-17:00
17:00-17:29
17:29-18:00
18:00-18:32
18:32-19:02
19:02-19:35
Current Channel Number and Name
Current Programme
Name
[Display by time]
[Display by channel]
Press / to select the
top bar and press /
to select the date, or
press / repeatedly
to select “TIMEto
change the display by
time.
In
In
Triathlon: ITU World Cha..
Agatha Christie’s Poirot
Korean News
Dr Oz
Days of Our Lives
Days of Our Lives
Ready Steady Cook
Macgyver
Swimming: FINA World Ch..
Extreme Dreams
Airline
Guerrilla Gardeners
I Fish Catch Of The Day
Bondi Rescue
Extreme Dreams
Airline
The following remote control buttons will enable
you to use the EPG functions.
Button Action
GUIDE
Press to display or exit
PROGRAMME GUIDE screen.
RED
Press to set recorder.
GREEN
Press to display information on
the selected programme.
YELLOW
Press to display schedule list.
BLUE
Press to set reminder.
/ / / Press to select the item in the list.
• The EPG will only be available when you are
receiving digital broadcasting signals.
Schedule Recorder
You can schedule a recording of future
programmes using PROGRAMME GUIDE.
1
Press EPG to display the PROGRAMME
GUIDE screen.
2
Select the programme to be recorded.
3
Press the RED button.
A Recorder menu will be shown with the
correct time, channel and duration. It also
provides the following setting options.
Start Time Set the time and date to start
recording.
End Time Set the time and date to end record-
ing.
Mode Select a mode for recording at the
same time.
4
Press / to choose an item and / to
change the setting.
5
Press OK to enter the programme to the
Schedule List.
An updated Schedule List will be shown.
• Timer Overlay” appears on the screen if the
current scheduled recording is overlapped with the
previous scheduled recording.
• Time Past” appears on the screen if the start time
has already past.
• Programme highlighted in yellow indicates a
recording is scheduled for that programme.
Basic Operation
Press INDEX to
select the top bar and
press / to switch
between TIME and
Channel List view.
Channel List
16
Schedule Reminder
You can set reminders for your favourite
programmes. The channel will be switched to the
selected programme at the schedule time if you
are watching another programme.
1
Press EPG to display the PROGRAMME
GUIDE screen.
2
Press / to select the programme for
reminder.
3
Press the BLUE button.
A Reminder Setting menu will be shown. It
provides the following setting options.
Channel Select the channel.
Minute Set the time.
Hour
Month Set the month.
Date Set the date.
Mode Select a mode for reminder.
4
Press / to choose an item and / to
change the setting.
5
Press OK to enter the programme to the
Schedule List.
An updated Schedule List will be shown.
• During the last 10 seconds of the preset reminder
time, an on-screen countdown will be displayed.
Press any button on the remote control or TV during
the countdown will cancel the reminder.
Viewing Schedule List
You can browse and change the future scheduled
recordings or reminders.
1
Press EPG to display the PROGRAMME
GUIDE screen.
2
Press the YELLOW button to display the
Schedule List.
• If the highlighted programme is currently
showing, press the RED button will start the
instant recording instead.
3
To delete a scheduled recording or reminder
from the list, press / to select and press
the RED button to delete.
• Once a programme is recorded or reminded, it will
be removed from the Schedule List.
Basic Operation
17
Initial Setup & Home Menu
Home
Press “HOME” to enter the home menu. There are
some shortcuts in the desktop:
SETTING - Change main TV setting, including:
Advanced Option:
Menu Language - Change the menu language
Time Zone - Change the time zone of your place.
(Note 1)
Network Setti ng: Menu for configuring the Net-
work settings.
Information: Show information about the TV set.
SOURCE: Op en the input source list to select
and switch between ATV, DTV, AV,
Component, PC and HDMI inputs.
VIDEO: Playback videos from USB
MUSIC: Playback music from USB
PHOTO: View photos from USB.
FILE: View text files from USB
Facebook - Launch the Facebook application
Picasa - Launch the Picasa application
Twitter - Launch the Twitter application
Web Browser - Open the web browser
• Web Browser only supports HTML5 video.
• Facebook, Picasa & Twitter require an accunt
to use, and may not have the same features
and functions available as when accessed via a
computer.
• Web Browser, Facebook, Picasa, Youtube &
Twitter require access to the internet for use.
Network setting
Wired Network
Plug the network cable to the LAN socket.
Press “HOME” to enter the home page.
Press the “ ” key to select the SETTING item,
then press “OK” to open the SETTING page.
Press the “ ” key to select the “Network Setting”,
then press “OK” to open the page.
Press the “ ” key to select the “Configuration”
item, then press “ ” to enter into the page.
Select the “Connect” item, press “OK” to test the
status.
Web Browser
Function Shortcuts
While in Web Browser mode, use the following
remote control buttons to perform actions.
MENU: Open/Close on-screen Keyboard.
EXIT: Quit the Web Browser.
P+ / P- : Page up/down.
Direction Arrows: Move on-screen cursor.
OK: Enter / Select field or button.
1: Next page 6: Settings
2: Previous page 7: History
3: Stop loading page 8: Bookmarks
4: Refresh page 9: Bookmark manager
5: Home page
Initial setup
The first time you power on the TV, a setup wizard will be displayed. Please follow the wizard:
Step 1. Select the language you need.
Step 2. Select the time zone of you place. (Note 1)
Step 3. Select the picture mode you like.
Step 4. Select the tuner mode. Press “OK” to scan the program.
18
PVR and Time Shift
PVR
Press the "REC" key to record.
Press the “ ” key to exit record mode.
Press the ” key to play or pause the recording
program.
Press the ” / “ ” key to display or hide the
control menu.
Press the “INDEX” button to display the list of
recorded programs. Press the “OK”
button to play.
Press the RED button to note the initial segment
and end segment. During replay you can
jump directly to the end of the segment
play.
Press the GREEN button to show or hide the
camera picture. Select any pictures, you
can play the beginning of the period of
time in the picture. Press “OK” to play
as a starting point in this picture when
selected in the picture.
Press the YELLOW button to remove the camera
pictures.
Press the BLUE button to take the current screen.
Press the ” / “ ” button to fast rewind or fast
forward when the cursor is above the
playback progress bar.
Notes:
PVR only works in digital TV mode.
Before you start recording, make sure there is
enough memory on your USB device.
Please use a high speed USB device.
The file can be played in the AIR or USB source. It
cannot be played in any other player, including PC.
This TV can only support USB devices in FAT16,
FAT32 format.
The recorded files can only be played on this TV;
normal playback on other TV sets is not ensured.
Time Shift
Press the “T.SHIFT” key to begin time shift.
Press the “ ” key to exit time shift.
Press the “ ” key to play or pause the time shift.
Press the ” / “ ” key to display or hide the
control menu.
Notes:
Time shift only works in digital TV mode.
Before you start time shift recording, make sure
there is enough memory on your USB device.
memory.
Please use a high speed USB device.
19
3D Settings
3D Format
Choose the 3D mode to match your input signal.
There are 5 Modes: 2D to 3D, Off, Left/Right, Top/
Bottom and Frame Sequence.
2D TO 3D
This option allows you to create a virtual 3D effect
from a 2D signal. You can also use the DEPTH
setting in conjunction with this mode to change
the strength of the effect or the virtual depth of the
image.
Off
When set to this option, the raw 2D or 3D image
will be displayed with no 3D effect.
Left right (Side-by-side)
Select this option to display videos recorded in
Side-by-side mode as a 3D video. Side-by-side
videos will appear like the image below if 3D mode
is set to Off. If the image appears out of focus try
swaping the left and right images by setting the
LEFT/RIGHT option to “On”.
Top/Bottom
Select this option to display videos recorded in
Top-Bottom mode as a 3D video. Top-Bottom
videos will appear like the image below if 3D mode
is set to Off. If the image appears out of focus try
swaping the left and right images by setting the
LEFT/RIGHT option to “On”.
Frame sequence (line-by-line)
This option will be selected automatically when
viewing a 3D Blu-ray connected to the TV via
HDMI.
3D to 2D
Set the option to On if you would like to view a 3D
only DTV Signal, Video or Blu-ray movie in 2D.
You can also use the Left/Right option to switch
between viewing the Left or Right eye image..
NOTE: Make sure you have read all safety precautions for 3D viewing (in the “Important Safety Instruc-
tions Section”) before you start 3D viewing. This TV set is 3D capable and can be used to view
3D broadcasts (if available) or 3D Blu-Ray discs (in conjunction with a Blu-Ray player).
Then press the 3D button on the remote control and enjoy 3D viewing.
• This TV uses ‘Passive’ 3D..
20
Menu Setting
Menu Operation
Press the “MENU” key to enter the main menu
for Picture, Audio, Time, Channel(Setup),
PVR(Function) and Lock options.
Press the “ ” / “ ” key to select a menu.
Press the “ ” / “ ” key to select a Menu Item.
Press the OK button to display or select options.
Press the “MENU” button to exit the menu inter-
face.
Picture
Picture Mode: Choose between Natural, Cinema,
Favourite, Game and Dynamic.
Colour T emperature: Choose between Normal,
Warm, Favourite and Cool.
Picture S ize: Choose the desired picture ratio
from Auto, 4:3, 16:9, ZOOM1, ZOOM2,
Panoramic, FULL and Just Scan (Op-
tions available depend on Input Source
selected).
Noise Re duction: Choose between Off, Low,
Middle and High.
MPEG N oise Reduction: Choose between Off,
Low, Middle and High.
Dynamic Contrast: Set to On or Off as desired.
Film Mod e: Set to On or Off as desired.
RGB (PC) only options:
Auto Adjust: Select to auto adjust image to fit
screen.
H Position: Adjust horizontal picture alignment
V Position: Adjust vertical picture alignment
Clock Phase: Adjust Clock phase
H Clock: Adjust synchronous clock
Audio
Sound M ode: Choose between Standard, Music,
Movie, Speech or Favorite.
Balance: Control the sound balance between the
right and left speaker.
Surround Sound: Turn virtual surround sound
mode On or Off.
Perfect V olume: Turn On to have the volume
adjusted automatically by the signal
source if supported.
Digital Au dio Output: Set the SPDIF sound
output mode to AUTO or PCM.
Audio De lay: Adjust the audio delay for DTV.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28

Hitachi LE47EC06AU User manual

Category
LCD TVs
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI