Alemite 9660-A User manual

Brand
Alemite
Model
9660-A
Type
User manual
Service Guide
Alemite Corporation
PO Box 473515, Charlotte, North Carolina 28247-3515
Copyright
©
1997 by Alemite Corporation
This document contains confidential information that is the property of Alemite Corporation
670729
and is not to be copied, used, or disclosed to others without express written permission.
Revision (1-97)
SER 9660
9660
9660-A
9669-B
16-1/4 "
(41.3 cm)
Air Exhaust
Air Inlet
Material
Outlet
Material Inlet
Bung
Adapter
5-1/4 "
(13.3 cm)
Extension
Figure 1
Medium-Pressure Stationary Pump
Models 9660, 9660-A and 9669-B - Model 9660 Shown
Description
The major components of the stationary pump assembly in
the 9660 model series consist of a(n):
• air-operated motor
• double-acting reciprocating pump tube
• extension
• bung adapter (Models 9660, 9669-B)
• drum cover assembly (Model 9660-A)
Pump Assembly
The medium-pressure (5:1 ratio) pump included with the
assembly is designed to deliver all grades of oil directly from
their original containers.
Models 9660, 9660-A, and 9669-B
Models 9660 and 9660-A include an extension to
accommodate 16-gallon containers. These models differ in their
accessories. Model 9669-B includes a bung adapter and an
extension to fit 55-gallon (200/205 liter) containers.
See
Figure 1
.
Specifications
Air Motor
Pump Tube
Piston Diameter x Stroke
Air Inlet
Max. Air Pressure
Inches Millimeters psi Bars
2-15/16 x 3 74.6 x 76.2 1/4 " NPTF (f) 150 10.3
For information on the air motor, refer to Service Guide
SER
338066-A1
Material
Inlet
Material
Outlet
Max. Material
Pressure
Delivery/Minute
(Approximate)*
Displacement
per Cycle
psi Bars Gallons Liters
In
3
Cm
3
1-1/2 " NPTF 1/2 " NPTF 750 52 7 26.5 7.2 118
* For detailed information, refer to
Figure 3
Table 1
9660 Model Series Specifications
Medium-Pressure Stationary Pump
Pump
Model
Container Extension
Bung
Adapter
Cover
Gallons Liters Inches Cm
9660
16
_
21-3/4 55.2
9660-A
9669-B 55 200/205 28-1/4 71.8
SER 9660
Medium-Pressure Stationary Pump
Revision (1-97) 2 Alemite Corporation
Apply
Thread Sealant
Here
1
3
4
7
6
5
8
9
10
Apply
Thread Sealant
Here
2
Figure 2
Medium-Pressure Stationary Pump Models 9660, 9660-A, and 9669-B- Exploded View
Medium-Pressure Stationary Pump
SER 9660
Alemite Corporation 3 Revision (1-97)
Item
No.
Part No. Description Qty Notes
Numeric Order
Part # (Item #)
1 9668 Pump Assembly, Medium-Pressure
1
See SER
9668
9668 (1)
2 326750-B1 Adapter, Bung 1 Model 9660 and 9669-B 172207-1 (9)
3 328034 Connector, 1/4 " NPTF (m) 1 All 17804 (8)
4 328030 Coupler Air, 1/4 " NPTF (f) 1 All 48018 (7)
5
338147-1 Extension, Suction Tube, 21-3/4 " Long 1 Model 9660 and 9660-A 77786 (10)
338147-2 Extension, Suction Tube, 28-1/4 " Long 1 Model 9669-B 326750-B1 (2)
6 338145 Cover Assembly (w/ Gasket) 1
Model 9660-A
328030 (4)
7 48018 Screw, Thumb, 1/4 " -28 3 328034 (3)
8 17804 Washer, 1/4 " 4 338145 (6)
9
172207-1 Washer, Lock, 1/4 " 4 338147-1 (5)
10 77786 Capscrew, 1/4 " -20 x 1/2 "
4
338147-2 (5)
Assembly
NOTE
: Refer to
Figure 2
for component
identification on all assembly procedures.
CAUTION
Select a clean environment for all assembly proce-
dures. Prevent contamination from foreign mate-
rial. Damage to components can occur.
Pump Assembly
IMPORTANT: Make sure to remove the pro-
tective cover from the inlet of Pump Assem-
bly (
1
).
NOTE
: Procedures 1 and 2 are applicable to
model 9660-A only.
1. Install Pump Assembly (
1
) into Cover (
6
).
2. Secure the Pump Assembly to the Cover with
Washers (
8
), Lock Washers (
9
), and Capscrews (
10
).
• Tighten the Capscrews securely.
IMPORTANT: Do not apply thread sealant to
the first two (2) threads of any connection.
Contamination can occur.
3. Screw Extension (
5
) [with thread sealant] into the foot
valve of the Pump Assembly.
• Tighten the Extension securely.
4. Screw Connector (
3
) [with thread sealant] into the inlet
of the air motor.
• Tighten the Connector securely.
5. Attach Air Coupler (
4
) to the Connector.
NOTE
: The remaining procedures are appli-
cable to model 9660-A only.
6. Fit the pump and cover assembly onto the container.
7. Secure the Cover to the container with Thumb
Screws (
7
).
Changes Since Last Printing
New Format
SER 9660
Medium-Pressure Stationary Pump
Revision (1-97) 4 Alemite Corporation
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Alemite 9660-A User manual

Brand
Alemite
Model
9660-A
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents