4 Press the INPUT button repeatedly to select the input source from which you want to record:
F-A/V: Device connected to the front audio/video input.
R-A/V: Device connected to the rear audio/video input.
F-SV: Device connected to the front S-Video input.
R-SV: Device connected to the rear S-Video input.
F-DV: Device connected to the front DV input.
CH###: Antenna/Cable TV Input.
• Select the desired TV channel using the UP/DOWN, CH
Y
/
B
, or 0-9 buttons.
5 Press ENTER to confirm your selection.
6 Press the DISPLAY button to access the control bar:
Quick Reference
Basic Recording
R6640
BASIC RECORDING
1 Press the OPEN/CLOSE button on the remote control or front panel to open the disc tray.
2 Insert a DVD+R or DVD+RW into the disc tray with the label side facing up.
3 Press OPEN/CLOSE again to close the disc tray.
8 Use the RIGHT/LEFT arrow keys to highlight the
“Record Quality“ icon and press ENTER.
9 Use the UP/DOWN arrow keys to select the desired
record quality, then press ENTER:
10 Press RECORD to start recording.
• To stop recording, press STOP.
• To pause recording, press PAUSE.
• To add recording time in 30-minute increments, press RECORD repeatedly.
• After recording has stopped, press MENU to view an Index of all titles (recordings) on the disc.
• To watch your recordings, use the ARROW keys to highlight the desired title and press PLAY.
Questions?
DO NOT RETURN
THIS PRODUCT TO
THE STORE!
Our “White Glove” Customer
Service Professionals are
Ready to Help!
Call Us!
1-800-736-7679
E-Mail Us!
Visit Our
Web Site!
www.govideo.com
On your first recording,
call us, and we’ll walk
you through it. Free.
Finalizing DVD+R Discs
DVD+RW discs are compatible with most other
DVD players. However, if you want your DVD+R
discs to be compatible with other DVD players, you
MUST finalize them:
1 Insert your DVD+R disc.
2 Press DISC OP. on the remote control.
3 Use the RIGHT/LEFT arrow keys to select
“FINAL”, then press ENTER.
• Disc finalization may take a few minutes to
complete.
• Once you have finalized a DVD+R, you
cannot record anything else on the disc.
• You can erase and rerecord a DVD+RW by
choosing “ERASE” from the menu.
/
