DT1355-CAR
13” Speedy Television
User’s Guide
Televisor Speedy de 13”
Manual del Usuario
Guide d'utilisation
For additional set-up or operating assistance,
please visit our website at www.disneyelectronics.com
or contact customer service at (954) 660-7026.
Please keep all packaging material for at least 90 days in case you
need to return this product to your place of purchase or Memcorp.
For parts and accessories, contact Fox International at 1-800-321-6993.
Distributed by Memcorp Inc., Weston, FL, Disney Elements © Disney 2006.
Para informacion adicional sobre la configuracion o si necesita asistencia
con la operacion del equipo, por favor visitenos en nuestra pagina web
www.disneyelectronics.com o si requiere asistencia directa, comuniquese
con nuestro departamento de servicio al cliente al numero (954) 660-7026.
Por favor mantenga todo el material de empaque por lo menos por
90 dias, en caso que usted necesite devolver el producto donde lo
compro a directamente a Memcorp Inc.
Para Accesorios o Partes en general, por favor comuniquese con
Fox International al numero 1-800-321-6993.
Distribuido por Memcorp Inc. Weston, FL, Disney Elements ©Disney 2006.
Pour obtenir des informations supplémentaires sur l’installation ou une
assistance concernant l’emploi de votre produit, veuillez visiter notre site
Web sur www.disneyelectronics.com ou contacter notre service clientèle
au (954) 660-7026.
Veuillez conserver tout matériel d’emballage pendant au moins 90 jours
au cas où vous devriez renvoyer votre produit à votre revendeur ou
directement à Memorex.
Pour les pieces et les accessoires, contactez Fox International at au
1-800-321-6993
Éléments Disney ©Disney 2006. Distribué par Memcorp Inc. Weston, Floride
Téléviseur « Speedy » 13 po
Important Safety Instructions
2
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL. (This Caution Marking is located at the rear enclosure of the unit.)
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead symbol
within an equilateral triangle is intended to alert
the user to the presence of uninsulated
dangerous voltage within the product’s
enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
The symbol for
class II
(Double Insulation)
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, AND ANNOYING INTERFERENCE, USE
THE RECOMMENDED ACCESSORIES ONLY.
SURGE PROTECTORS:
It is recommended to use a surge protector for
AC connection. Lightning and power surges ARE
NOT covered under warranty for this product.
FCC NOTICE:
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment
generates, uses and can radiate radio
frequency energy and, if not installed and used
in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to
radio or television reception, which can be
determined by turning the equipment off and on,
the user is encouraged to try to correct the
interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced
radio/TV technician for help.
DO NOT DISASSEMBLE SMALL PARTS:
Do not disassemble or break apart the small
objects in the Car TV and/or the remote control;
i.e., the screw cover, logo, key chain, etc. These
are reserved for maintenance only. Do not let
children put these small parts into their mouths. It
is dangerous and hazardous to their health.
Important Safety Instructions
3
ATTENTION:
POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE
LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE
CORRESPONDANTE DE LA PRISES ET POUSSER
JUSQU’AU FOND.
This Class B digital apparatus complies with
Canadian ICES-003.
Cet appareil numérique de la classe B est
conforme à la norme NMB-003 du Canada.
FCC CAUTION:
To assure continued compliance, follow the
attached installation instructions and use only
shielded cables when connecting to other
devices. Also, any changes or modifications not
expressly approved by the party responsible for
compliance could void the user’s authority to
operate the equipment.
Before using the unit, be sure to read all operating
instructions carefully. Please note that these are
general precautions and may not pertain to your unit.
For example, this unit may not have the capability to
be connected to an outdoor antenna.
1. READ INSTRUCTIONS
All the safety and operating instructions should be
read before the product is operated.
2. RETAIN INSTRUCTIONS
The safety and operating instructions should be
retained for future reference.
3. HEED WARNINGS
All warnings on the product and in the operating
instructions should be adhered to.
4. FOLLOW INSTRUCTIONS
All operating and use instructions should be
followed.
5. CLEANING
Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a dry cloth for cleaning.
6. ATTACHMENTS
Do not use attachments not recommended by the
product's manufacturer as they may cause hazards.
7. WATER AND MOISTURE
Do not use this product near water–for example:
near a bathtub, washbowl, kitchen sink or laundry
tub; in a wet basement; or near a swimming pool.
8. ACCESSORIES
Do not place this product on an unstable cart, stand,
tripod, bracket or table. The product may fall,
causing serious injury and serious damage to the
product. Use only with a cart, stand, tripod, bracket
or table recommended by the manufacturer or sold
with the product. Any mounting of the product should
follow the manufacturer’s instructions, and should
use a mounting accessory recommended by the
manufacturer.
8A. An appliance and cart combination
should be moved with care. Quick
stops, excessive force and uneven
surfaces may cause the appliance
and cart combination to overturn.
9. VENTILATION
Slots and openings in the cabinet and
in the back or bottom are provided for
ventilation, to ensure reliable operation of the
product and to protect it from overheating. These
openings must not be blocked or covered. The
openings should never be blocked by placing the
product on a bed, sofa, rug or other similar surface.
This product should never be placed near or over a
radiator or heat source. This product should not be
placed in a built-in installation such as a bookcase
or rack unless proper ventilation is provided or the
manufacturer's instructions have been adhered to.
10. POWER SOURCES
This product should be operated only from the type
of power source indicated on the marking label. If
you are not sure of the type of power supply to your
home, consult your appliance dealer or local power
company. For products intended to operate from
battery power, or other sources, refer to the
operating instructions.
11. GROUNDING OR POLARIZATION
This product is equipped with a polarized
alternating-current line plug (a plug having one blade
wider than the other). This plug will fit into the power
outlet only one way. This is a safety feature. If you
are unable to insert the plug fully into the outlet, try
reversing the plug. If the plug should still fail to fit,
contact your electrician to replace your obsolete
outlet. Do not defeat the safety purpose of the
polarized plug.
12. POWER-CORD PROTECTION
Power-supply cords should be routed so that they
are not likely to be walked on or pinched by items
placed upon or against them, paying particular
attention to cords at plugs, convenience receptacles,
and the point where they exit from the appliance.
13. LIGHTNING
To protect your product from a lightning storm, or
when it is left unattended and unused for long
periods of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This will
prevent damage to the product due to lightning and
power-line surges.
14. POWER LINES
An outside antenna system should not be located in
the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall into such
power lines or circuits. When installing an outside
antenna system, extreme care should be taken to
keep from touching such power lines or circuits as
contact with them might be fatal.
15. OVERLOADING
Do not overload wall outlets and extension cords as
this can result in a risk of fire or electric shock.
16. OBJECT AND LIQUID ENTRY
Never push objects of any kind into this product
through openings as they may touch dangerous voltage
points or short out parts that could result in fire or
electric shock. Never spill or spray any type of liquid on
the product.
17. OUTDOOR ANTENNA GROUNDING
If an outside antenna is connected to the product, be
sure the antenna system is grounded so as to
provide some protection against voltage surges and
built-up static charges. Section 810 of the National
Electric Code, ANSI/NFPA 70, provides information
with respect to proper grounding of the mast and
supporting structure, grounding of the lead-in wire to
an antenna discharge product, size of grounding
conductors, location of antenna discharge product,
connection to grounding electrodes and
requirements for grounding electrodes.
18. SERVICING
Do not attempt to service this product yourself as
opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
19. REPLACEMENT PARTS
When replacement parts are required, be sure the
service technician uses replacement parts specified
by the manufacturer or those that have the same
characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock or
other hazards.
20. SAFETY CHECK
Upon completion of any service or repairs to this
product, ask the service technician to perform safety
checks to determine that the product is in proper
operating condition.
21. WALL OR CEILING MOUNTING
The product should be mounted to a wall or ceiling
only as recommended by the manufacturer.
22. DAMAGE REQUIRING SERVICE
Unplug the product from the wall outlet and refer
servicing to qualified service personnel under the
following conditions:
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen
into the product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally by fol-
lowing the operating instructions. Adjust only
those controls that are covered by the operating
instructions, as an adjustment of other controls
may result in damage and will often require
extensive work by a qualified technician to
restore the product to its normal operation.
e. If the product has been dropped or the cabinet
has been damaged.
f. When the product exhibits a distinct change in
performance–this indicates a need for service.
23. HEAT
The product should be situated away from heat
sources such as radiators, heat registers, stoves or
other products (including amplifiers) that produce
heat.
24. NOTE TO CATV SYSTEM INSTALLER
This reminder is provided to call the CATV system
installer's attention to Article 820-40 of the NEC that
provides guidelines for proper grounding and, in
particular, specifies that the cable ground shall be
connected to the grounding system of the building,
as close to the point of cable entry as practical.
Important Safety Instructions
4
ANTENNA
LEAD IN
WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
NEC - NATIONAL ELECTRICAL CODE
ELECTRIC
SERVICE
EQUIPMENT
GROUND
CLAMP
S2898A
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
5
Introduction
Important Safety Instructions -------------------2-4
Table of Contents ------------------------------------5
Features -----------------------------------------------5
Getting Started
Antenna Connection ------------------------------- 6
Cable(CATV) /Satellite Connections ------------ 7
Connection Audio/Video In Jacks --------------- 8
Location of Controls ---------------- ------------9-10
Power Source And Remote Control -----------11
Setup Menus
Language ---------------------------------------------- 12
TV/Cable TV (CATV) ------------------------------- 13
Auto Search (Setting TV Channels) ------------ 14
Manual Channel Tuning --------------------------- 15
Favorite Channel Setting --------------------------16
Adding or Erasing Channels----------------------17
On-Screen Menus
Picture Adjustments--------------------------------- 18
Clock---------------------------------------------------- 19
On-Timer----------------------------------------------- 20
Off-Timer-----------------------------------------------21
Closed Caption---------------------------------------22
Parental Lock
Parental Control ------------------------------------- 23
Changing the Password --------------------------- 24
Blocking Programming with Movie Ratings --- 25
Blocking Programming with TV Ratings -------26
Parental Lock Blocking Options -----------------27
Channel Lock ----------------------------------------- 28
Child Lock --------------------------------------------- 29
Timer --------------------------------------------------- 30
Calendar ---------------------------------------------- 31
Here are a few of the special features of your new
Color Television.
Automatic Channel Programming: Quick and
easy selection of available stations.
Child Lock : Locks the buttons on the front of the TV
so it cannot be operated accidentally by young
children.
Closed Captioning: Allows you to read TV program
dialog or voice conversations as on-screen text.
Off-Timer: Turns off the TV at a preset time.
On-Timer: Turns on the TV at a preset time to a
designated TV channel or video source.
On-Screen Menus: On-Screen text (in English,
French, or Spanish) for setting TV controls.
Parental Lock: Allows you to block the viewing of
certain TV channels if you do not want your children
viewing inappropriate material.
Remote Control: Operates your TV and navigates
the menus.
Sleep Timer: Turns off the TV within an amount of
time you specify. (10-120 minutes from the current
time).
Picture Preset Mode: Lets you set the picture’s
color, tint, contrast, etc. for various types of
programming. Settings include Mild, Standard,
Dynamic, and Personal, which set the picture control as
you want.
Standard Broadcast (VHF/UHF) or Cable TV
channel capability.
Table of Contents
Specification------------------------------------------32
Antenna Connection
6
OUTDOOR VHF/UHF ANTENNA CONNECTION (ANTENNA NOT INCLUDED)
Follow the instructions for the type of antenna system you intend to use.
Combination VHF/UHF Antenna
(Single 75 ohm cable or 300 ohm
twin-lead wire)
Separate VHF/UHF Antennas
Combination VHF/UHF Antenna
(Separate VHF and UHF 300 ohm twin-
leads)
Connect the UHF twin-lead wire to a combiner
(NOT SUPPLIED). Connect the VHF twin-lead to a
300-75 ohm matching transformer (NOT
SUPPLIED). Attach the transformer to the
combiner. Attach the combiner to the antenna jack.
Connect the 75 ohm cable from the VHF antenna
and the UHF antenna twin-lead wire to a
combiner (NOT SUPPLIED). Attach the
combiner to the antenna jack.
NOTE: If your VHF antenna has a twin-lead wire,
use a 300-75 ohm matching transformer, then
connect the transformer to the combiner.
Connect the 75 ohm cable from the combination
VHF/UHF antenna to the antenna jack.
OR
If your combination antenna has a 300 ohm twin-
lead wire, use a 300-75 ohm matching
transformer (NOT SUPPLIED).
Cable(CATV) /Satellite Connections
7
This TV has an extended tuning range and can tune most cable channels without using a Cable TV
converter box. Some Cable TV companies offer “premium pay channels” in which the signal is scrambled.
Descrambling these signals for normal viewing requires the use of a descrambler device which is generally
provided by the cable company.
FOR SUBSCRIBERS TO BASIC CABLE TV SERVICE
For basic cable service not requiring a converter/descrambler
box, connect the CATV 75 ohm coaxial cable to the VHF/UHF
jack on the rear of the TV.
FOR SUBSCRIBERS TO SCRAMBLED CABLE TV SERVICE OR SATELLITE
If you subscribe to a satellite service or a cable TV service which requires the use of a
converter/descrambler box, connect the incoming 75 ohm coaxial cable to the converter/descrambler box.
Using another 75 ohm cable, connect the output of the converter/descrambler or satellite box to the
antenna jack on the TV. Follow the connections shown below. Set this unit to the output channel of the
converter/descrambler or satellite box (usually 3 or 4) and use the converter/descrambler or satellite box
to select channels.
INCOMING
75 OHM
CATV CABLE
SPLITTER A/B SWITCH
75 OHM
CABLE
CONVERTER/
DESCRAMBLER
Antenna
In
FOR SUBSCRIBERS TO UNSCRAMBLED BASIC CABLE TV SERVICE WITH
SCRAMBLED PREMIUM CHANNELS
If you subscribe to a satellite service or a cable TV service in which basic channels are unscrambled and
premium channels require the use of a converter/descrambler box, you may wish to use a signal splitter and
an A/B switch box (available from the cable company or an electronic supply store). Follow the connections
shown below. With the switch in the “B” position, you can directly tune any nonscrambled channels on your
TV. With the switch in the “A” position, tune your TV to the output of the converter/descrambler box (usually
channel 3 or 4) and use the converter/descrambler box to tune scrambled channels.
Antenna
In
8
Connection Audio/Video In Jacks
The basic device (VCR, DVD player etc.) to TV connection is described below. For other
hookups, refer to your device's instruction manual.
1
Connect a yellow video cable to the VIDEO in jack on the rear of the TV and to the VIDEO OUT jack
on your VCR (or other component).
2
Connect an audio cable to the AUDIO in jack on the rear of the TV and to the AUDIO OUT of the VCR
(or other device). Match the cable color to the jack color.
3
Turn on the TV and the VCR.
4
Press the TV/AV button on the unit or the VIDEO button on the remote until VIDEO appears in the upper
right corner of the TV screen. When you play material on the VCR, DVD player, etc. that is connected
to the AUDIO and VIDEO jacks it will appear on the TV on the AV channel.
Helpful Hints:
• Audio and video cables are not supplied with the TV.
• Audio cables are usually red or white. Video cables are usually yellow.
• For the Audio In Jacks, they are not in stereo.
• Use a coaxial cable to connect the VCR’s ANTENNA OUT jack to the TV’s 75OHM ANTENNA
INPUT jack. Your VCR may not have audio and video out jacks, but only an RF or ANTENNA OUT jack.
ANT IN
75 OHM
VIDEO-INAUDIO-IN
Note:There is only one channel for both front and rear Audio/Video input, only input signal to the
front or rear A/V IN jacks to view it in the AV mode. Never input signal to both the front and rear A/V IN jacks
simultaneously.
VIDEO-IN
If you connect the TV to a VCR or DVD for playback, or if you
connect a camcorder or Video Game System, you can make your
selection by pressing the TV/AV button on the front cabinet or
VIDEO button on remote control.
Press the TV/AV button on front cabinet or VIDEO button on remote
control repeatedly to select the desired mode.
VIDEO will display on the screen.
TV/AV SELECTION
2. To connect the TV to a Video Game System
The TV can also be used as a display device for many video
games. However, due to the wide variety of different types of
signal generated by these devices and subsequent hook-up
variations required, they have not all been included in the
suggested connection diagrams. You'll need to consult each
component's Owner's Manual for additional information.
TV VIDEO
1. To connect the TV to a VCR
Rear of TV
VCR
To Audio/Video
OUT
(not supplied)
VIDEO
AUDIO
To Audio/Video OUT
Front of TV
(not supplied)
3. To connect the TV to the Camcorder
To playback from the camcorder, connect the camcorder to the
TV as shown.
Front of TV
To AV OUT jack
(not supplied)
AUDIO-IN
Location of Controls
STANDBY INDICATOR
Press to enter or exit Calendar directly.
11. MENU Button
Press to see the TV s on-screen menu.
Press to go back to the previous menu or to
remove a menu from the screen.
12. CHANNEL +/- Button
Press to select memorized TV channels.
13. VOLUME +/- Button
Press to adjust the TV sound level.
14. OK Button
Within the on-screen menu, press to select a
special function, such as Favorite list, etc.
Mild, Standard, Dynamic or Personal
Power Source And Remote Control
Power Source
Battery Precautions
place
12
You can set the TV’s on-screen menu to English, French or
Spanish.
1. Press MENU to see the PICTURE main menu.
2. Press VOL+ or VOL- repeatedly to select the Setup menu.
3. Press CH+ or CH- repeatedly to select Language.
4. Press VOL+ or VOL- to select English, Francais (French),
or Espanol (Spanish).
5. Press MENU repeatedly to exit the menu or the menu will
automatically disappear within a few seconds if no buttons are
pressed on the remote control.
Note:
The language control only affects the language of the TV menus.
It does not change the other on-screen text features, such as
Closed Captions.
Language
50
C.C.D. C1
SETUP
English
P. Lock
Child lock Off
Timer Off
Language
Sharpness
50
Contrast
50
PICTURE
50
Color
Brightness
Noise Red.
45
Tint
Color. Temp
On
Normal
00
-
+
Sharpness
Blue Back On
50
50
C.C.D. C1
SETUP
Language
English
P. Lo ck
Child lock Off
Timer Off
13
TV/Cable TV (CATV)
It is important for the TV to know what type of signal (Cable TV
(CATV) or a normal antenna) you are using. Choose your signal
(Antenna or Cable):
1. Press MENU to see the PICTURE main menu.
2. Press VOL+ or VOL- repeatedly to select the Search menu.
3. Press CH+ or CH- repeatedly to select TV/CATV.
4. Press VOL+ or VOL- to select TV or CATV. Choose CATV if
you have Cable TV service. (See page 7 for connection
details.) If you do not have Cable TV service and you
connected an antenna to the TV, choose TV. (See page 6 for
connection details.)
5. Press MENU repeatedly to exit the menu or the menu will
automatically disappear within a few seconds if no buttons are
pressed on the remote control.
Notes:
• When CATV is selected, channels 1-125 are available.
• When TV is selected, only channels 2-69 are available.
• You cannot select the SEARCH menu if the TV is set to a
video input channel (AV). Press TV/AV repeatedly to get to
regular TV programming.
Sharpness
50
Contrast
50
PICTURE
50
Color
Brightness
Noise Red.
45
Tint
Color. Temp
On
Normal
00
-
+
Sharpness
Blue Back On
50
Add/Erase Add
SEARCH
Up
TV/CATV
Channel
Favorite List
TV
Manual
Auto Search
2
Add/Erase Add
SEARCH
Up
Channel
Favorite List
Manual
2
Auto Search
TV/CATV TV
pre
Press MENU button to return to previous menu.
14
You can set your TV to receive local TV channels (from an
antenna) or Cable TV channels (when you have Cable TV
service). Then, use Auto Search to set up channels that are
available for you. This makes it easy for you to select only the
available TV stations when you press CH+ or CH-. Before you
start Auto Search, make the Antenna or Cable TV connection
described on pages 6 and 7. In the menu select TV or Cable
(CATV) as described on page 13.
1. Press MENU to see the PICTURE main menu.
2. Press VOL+ or VOL- repeatedly to select the Search menu.
3. Press CH+ or CH- repeatedly to select Auto Search.
4. Press VOL+ to start programming TV channels. Press VOL-
if you need to stop channel programming during the process.
When channel setup is completed, the TV will go to its lowest
channel.
Notes:
• Press CH+ or CH- to see which channels are in the TV’s
memory. You can also select channels that have not been
memorized using the number buttons on the remote control.
•To delete unwanted channels from the TV’s memory or to add
more channels, see Add/Erase on page 17.
•You cannot select the SEARCH menu if the TV is set to a
video input channel (AV). Press TV/AV repeatedly to get to
regular TV programming.
Auto Search (Setting TV channels)
Sharpness
50
Contrast
50
PICTURE
50
Color
Brightness
Noise Red.
45
Tint
Color. Temp
On
Normal
00
-
+
Sharpness
Blue Back On
50
Add/Erase Add
SEARCH
Up
TV/CATV
Channel
Favorite List
TV
Manual
Auto Search
2
Add/Erase Add
SEARCH
Up
TV/CATV
Channel
Favorite List
TV
Manual
2
Auto Search
Programming
Please Wait
TV 2
Stop
If you have selected TV(antenna) on the previous page, enter a
two-digit channel number. If you have selected CATV(cable TV),
enter a
three-digit channel number.
15
Manual Channel Setting
Manual Channel Tuning allows you to search for channels that
may have been missed during the Auto Search. For example, if
you are looking for a channel between 60 and 70, start the
search at channel 60 and go up.
1. Press MENU to see the PICTURE main menu.
2. Press VOL+ or VOL- repeatedly to select the Search menu.
3
. Press CH+ or CH- repeatedly to select TV/CATV.
4. Press VOL+ or VOL- to select TV or CATV (whichever you
have). Details are on page 13.
5. Press CH+ or CH- repeatedly to highlight Channel.
6. Press VOL+ or VOL- to enter the channel number at which
you want to begin the search. Then press CH+ or CH- repeatedly
7. Press VOL+ to start searching upward. During searching,
press VOL- to stop the searching when the channel is found.
Otherwise the search will stop at the first available channel.
Or, press VOL- to start searching downward.
During searching, press VOL+ to stop the searching when
the channel is found. Otherwise the search will stop at the first
available channel.
8. Press MENU repeatedly to exit the menu or the menu will
automatically disappear within a few seconds if no buttons are
pressed on the remote control.
Note:
•You cannot select the SEARCH menu if the TV is set to a
video input channel (AV). Press TV/AV repeatedly to get to
regular TV programming.
Add/Erase Add
SEARCH
Up
TV/CATV
Channel
Favorite List
TV
Manual
Auto Search
2
Add/Erase Add
SEARCH
Up
Channel
Favorite List
Manual
2
Auto Search
TV/CATV TV
Add/Erase Add
SEARCH
Up
Favorite List
Manual
Auto Search
TV/CATV TV
Channel 2
Add/Erase Add
SEARCH
Favorite List
Auto Search
TV/CATV TV
Channel 2
Up
Manual
to highlight manual.
16
Favorite Channel Setting
You can store five channels you prefer into the Favorite
List and recall these channels easily by pressing the FAV
button on the remote control.
1. Press MENU to see the PICTURE main menu.
2. Press VOL+ or VOL- repeatedly to select the Search menu.
3. Press CH+ or CH- repeatedly to select Favorite List.
4. Press OK to display the features of Favorite List.
5. Press CH+ or CH- repeatedly to select TV/CATV.
6. Press VOL+ or VOL- to select TV or CATV (whichever you
have). Details are on page 13.
7. Press CH+ or CH- to select CH1 (the first channel position),
then press VOL+ or VOL- to enter a channel number you
want to store at this position, such as CATV 8. Repeat to set
the other four favorite channels.
8. Press MENU repeatedly to exit the menu or the menu will
automatically disappear within a few seconds if no buttons are
pressed on the remote control.
Note:
•You cannot select the SEARCH menu if the TV is set to a
video input channel (AV). Press TV/AV repeatedly to get to
regular TV programming.
Add/Erase Add
SEARCH
Up
TV/CATV
Channel
Favorite List
TV
Manual
Auto Search
2
Add/Erase Add
SEARCH
Up
Channel
Manual
2
Auto Search
TV/CATV TV
Favorite List
TV/CATV
CH1
CH2
CH3
CH4
CH5
CATV
CATV
CATV
CATV
CATV
CATV
1
2
3
4
5
Then press the CH+ or CH- repeatedly to highlight Manual.
17
Adding or Erasing Channels
You can add or erase channels from the list in the TV’s memory.
1. Press MENU to see the PICTURE main menu.
2. Press VOL+ or VOL- repeatedly to select the Search menu.
3. Press CH+ or CH- repeatedly to highlight Channel.
4. Press VOL+ or VOL- to enter the channel number you want
to add or erase.
5. Press CH+ or CH- repeatedly to highlight Add/Erase.
6. Press VOL+ or VOL- to choose Add or Erase. If you select
Add, the channel will be available when you press CH+ and
CH- to move through channels. Choosing Erase will remove
the channel from the TV’s memory. The channel will not be
available when you flip through channels with the CH+ and
CH- buttons.
7.Press MENU repeatedly to exit the menu or the menu will
automatically disappear within a few seconds if no buttons are
pressed on the remote control.
Notes:
• You cannot select the SEARCH menu if the TV is set to a
video input channel (AV). Press TV/AV repeatedly to get to
regular TV programming.
• You won’t see the change take effect until you scroll through
the channels in memory using the CH+/- buttons.
SEARCH
Up
Channel
Manual
2
Auto Search
TV/CATV TV
Favorite List
Add/Erase Add
Add/Erase Add
SEARCH
Up
TV/CATV
Channel
Favorite List
TV
Manual
Auto Search
2
Add/Erase Add
SEARCH
Up
Favorite List
Manual
Auto Search
TV/CATV TV
Channel 2
18
Picture Adjustments
To adjust your TV picture, select a channel and follow the steps
below:
1. Press MENU to see the PICTURE main menu.
2. Press CH+ or CH- repeatedly to highlight your choice:
Color, Brightness, Contrast, Sharpness, Tint, Blue Back
(background), Noise Red. (reduction), or Color. Temp
3. Press VOL+ or VOL- to increase or decrease the element
you choose. However, you can turn Blue Back to only On or
Off (see below). You can choose Warm, Cool or Normal
mode for color temperature.
4. Press MENU repeatedly to exit the menu or the menu will
automatically disappear within a few seconds if no buttons are
pressed on the remote control.
Notes:
• Color: Adjust to add or reduce color.
• Brightness: Adjust to brighten the darkest parts of the
picture.
• Contrast: Adjust the distinction between the black and white
parts of the picture.
• Sharpness: Improve picture detail.
• Tint: Obtain natural skin tones.
• Blue Back: Turn this option On or Off. If you choose On, a
solid blue background screen will appear if the TV is on a
weak channel (for example, if the reception is very poor or if
the station has gone off the air for the night). After being on
such a channel for 15 minutes, the TV will turn itself off
automatically.
•
Color. Temp:
Set this option to Normal, Warm or Cool mode.
Sharpness
50
Contrast
50
PICTURE
50
Brightness
Noise Red.
Tint
Color. Temp
On
Normal
00
-
+
Sharpness
Blue Back On
50
Color 45
Sharpness
50
Contrast
50
PICTURE
50
Brightness
Noise Red.
Tint
Color. Temp
On
Normal
00
-
+
Sharpness
50
Color 45
Blue Back On
Sharpness
50
Contrast
50
PICTURE
50
Brightness
Tint
00
-
+
Sharpness
50
Color 45
Blue Back On
Noise Red. On
Color. Temp Normal
Sharpness
50
Contrast
50
PICTURE
50
Brightness
Tint
Color. Temp Normal
00
-
+
Sharpness
50
Color 45
Blue Back On
Noise Red. On
Noise Red.: Turn this option ON or OFF. If you choose ON, it
•
will reduce the noise and improve the picture quality.
(color temperature) .
19
Clock
Follow these steps to set your TV’s clock.
1. Press MENU to see the PICTURE main menu.
2. Press VOL+ or VOL- repeatedly to select the Time menu.
3. Press CH+ or CH- repeatedly to select Clock.
4. Press VOL+ or VOL- to change the time in minutes. Press
and hold VOL+ or VOL- to change the time quicky in 10
minute increments; press OK. The highlight moves to the
hour position. Use VOL+ or VOL- to set the hour.
5. Press MENU repeatedly to exit the menu or the menu will
automatically disappear within a few seconds if no buttons are
pressed on the remote control.
Note:
• If there is power failure, the clock will be reset and you will need
TI ME
Off Time
Off
On Time
0:00
Off
Channel 2
TV/CATV
CATV
0:00
Clock 0:00
TI ME
Off Time
Off
On Time
0:00
Off
Channel 2
TV/CATVCATV
0:00
Clock
7:30
to set the clock again.
20
On-Timer
To turn on the TV to a specific channel at a specific time, use the
On-Timer. Before you begin, set the clock correctly. Details are
on page 19.
1. Press MENU to see the PICTURE main menu.
2. Press VOL+ or VOL- repeatedly to select the the Time menu.
3. Press CH+ or CH- repeatedly to highlight TV/CATV.
4. Press VOL+ or VOL- to select TV or CATV, depending on
whether you have Cable TV service or not. Details are on
page 13.
5. Press CH+ or CH- repeatedly to highlight Channel.
6. Press VOL+ or VOL- to enter the channel number. This will
be the channel to which the TV turns on at the specified time.
7. Press CH+ or CH- repeatedly to highlight On Time.
8. Press VOL+ or VOL- to select Once (or Daily, Off). If you
select Once, the timer will turn on the TV one time within the
next 24 hours only. If you select Daily, the timer will turn on
the TV at the same time and to the same channel every day.
Choose Off to cancel the On-timer.
9. Press CH+ or CH- repeatedly to highlight 0:00 under the
line of On Time.
10.Press VOL+ or VOL- to enter the on time. Hold down VOL+
or VOL- to change the time quickly in 10 minute increments;
press OK. The hour is highlighted. Use VOL+ or VOL- to set
the hour. This will be the time at which the TV will turn itself
on.
11.Press MENU repeatedly to exit the menu or the menu will
automatically disappear within a few seconds if no buttons are
pressed on the remote control.
TI ME
Off Time
Off
0:00
Channel 2
TV/CATVCATV
0:00
Clock
7:30
nO Time Off
TI ME
Off Time
Off
Channel 2
TV/CATVCATV
0:00
Clock
7:30
nO Time Once
8:45
TI ME
Off Time
Off
0:00
Channel 2
TV/CATVCATV
0:00
Clock
7:30
nO Time Once
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/