Bully Dog 33302 & 33303 '99-'07 GMC Sierra & Chevy Silverado Owner's manual

Brand: Bully Dog

Model: 33302 & 33303 '99-'07 GMC Sierra & Chevy Silverado

Type: Owner's manual

Questions about installation or product details? Contact our Tech Support team at 940-783-9914

Part# 33302/33303 works on: GM Sierra/Silverado

1999-2007

Custom A-Pillar Pod

Installation Instructions

Pod Adapter

A-Pillar Pod

STEP 1:

Remove the driver’s side dash panel.

STEP 2:

Pull out the weather stripping around the A-pillar

(so it can be moved easily).

STEP 3:

If installing another tuner install

the appropriate pod adapter at

this time. LWTS+ requires part

# 30604 and GTX requires part

# 30605, which is not included.

Follow instructions on installing

the located on the inside of the

packaging card. If you have stock

speakers be sure to reconnect

them at this time.

GT Head Unit

GT Custom Pod Adapter

Custom Gauge Pod

(To OBDII Adapter Plug)

Main Harness

Main Harness Plug

WHAT’S INCLUDED:

Plastic Rivets

Questions about installation or product details? Contact our Tech Support team at 940-783-9914

33302-99_v1.2

STEP 4:

Peel the clear strip(s) off the adhesive tape on the back of the pod mount and then slide the

pod over the stock A-pillar until they line up.

STEP 5:

Firmly press against the parts of the pod mount

where the adhesive tape touches the stock A-pillar

for a secure attachment.

STEP 6:

Run all of the wiring down the side of the dash and

replace the driver’s side dash panel and re-secure

the weather stripping.

NOTE:

If you are installing a pod with a speaker, make sure that the speaker hole

lines up so that it is directly over the speaker in the stock A-pillar.

Bully Dog 33302 & 33303 '99-'07 GMC Sierra & Chevy Silverado Owner's manual

Bully Dog 33302 & 33303 '99-'07 GMC Sierra & Chevy Silverado Owner's manual

Bully Dog 33302 & 33303 '99-'07 GMC Sierra & Chevy Silverado Owner's manual

Related papers

Other documents