Loctite CL10 Operating instructions

Brand: Loctite

Model: CL10

Type: Operating instructions

EQUIPMENT

Operation Manual

Intensity%

TimeS

CL10 Single LEDController

ItemNo. 1514636

SET

Loctite



CL10 Single LED Controller

Item # 1514636

Contents

............................................................................................................................................................................1

Contents............................................................................................................................................................2

1 Caution...........................................................................................................................................................3

1.1 Safety Instruction...............................................................................................................................4

1.2 Out of Box Inspection........................................................................................................................4

1.3 Items Supplied ...................................................................................................................................4

2 Overview........................................................................................................................................................5

3 Technical Data..............................................................................................................................................5

4 Installation ....................................................................................................................................................6

4.1 Capacity..................................................................................................................................................6

4.2 Dimension...............................................................................................................................................6

4.3 Caution................................................................................................................................................7

4.4 Installation Flow.................................................................................................................................7

5 Controller button and Operating...........................................................................................................8

5.1 Component name and function .......................................................................................................8

5.2 Button and Display Instruction ...........................................................................................................9

5.2.1 Button Instruction...............................................................................................................................9

5.2.2 Display instruction..............................................................................................................................9

5.3 Operating............................................................................................................................................9

5.3.1 Startup............................................................................................................................................9

5.3.2 Starting Controller.......................................................................................................................10

5.3.3 Working Mode.............................................................................................................................10

5.4 Parameter Setting............................................................................................................................10

5.4.1 Intensity Setting...........................................................................................................................10

5.4.2 Time Setting ................................................................................................................................10

5.5 Working mode setting.....................................................................................................................11

5.6 Working Temperature.....................................................................................................................11

5.7 LED Head Unit and Foot Switch ...................................................................................................11

6 Shutdown...............................................................................................................................................12

7 Troubleshooting....................................................................................................................................13

8 Replacement Parts...............................................................................................................................14

9 WARRANTY..........................................................................................................................................15

1 Caution

Info:

Warning instructions in this manual and on labels are classified and described

below.

WARNING: This means that possible death or serious

injury to the operator may result if these instructions are

ignored and the equipment handled incorrectly.

Forbidden：This symbol means that the instruction

describes prohibited item or action.

ELECTRICAL EQUIPMENT

This symbol means that possible serious injury by high

voltage.

Heating：This symbol means possible serious injury by

high temperatures.

Info

Ultraviolet radiation warning：This symbol means that

possible serious injury by Ultraviolet radiation.

1.1 Safety Instruction

Forbidden

 Disassembly and modification is prohibited.

 Discontinue use if power cable is frayed or damaged.

 Should an abnormal condition occur such as smoking, abnormal smell or

noise, turn off the power immediately and disconnect the power cable from

the AC outlet.

When internal inspection or repair is needed, contact the selling agent or

Henkel.

Warning

 Disassembly and modification is prohibited.

 Make sure that the power voltage in use complies with specifications.

 Disconnect the power supply after finishing work.

 Please hold power plug when unplugging the power cable.

 Do not allow liquid to enter the equipment.

 Disconnect the power supply before cleaning the equipment. Do not use an

organic solvent to clean the cabinet.

 In case of an abnormal condition, stop using the equipment immediately.

1.2 Out of Box Inspection

Open Loctite® CL10 Single LED Controller package carefully and check if any

components were damaged during shipment. Please inform carrier if damage has

occurred. Any claims for shipping damage must be made to the carrier and inform

supplier immediately.

1.3 Items Supplied

1514636 Loctite® CL10 Single LED Controller x1

97201 Foot Switch x1

Power Cable x1

Make sure to read these “safety Instructions”carefully before

starting to use the equipment and observe them during operation.

Please familiarize yourself with warning instructions and labels.

2 Overview

Loctite® CL10 Single LED Controller is a UV light source that emits a spot of

light at a wavelength of 365 or 405nm for use in adhesive Light Cure bonding

applications.

Advantage：

1. Over 20,000 working hours.

2. No IR emission resulting in low temperature curing. Will not damage

parts due to heat emission.

3. Up to 90% energy savings, compared with mercury arc lamps.

4. Small, LED head for hand held or fixed fixture applications.

5. Foot switch actuated or PLC remote control.

6. Timed mode or manual cycling.

7. Low maintenance cost.

3 Technical Data

Type

CL10 Single LED Controller

Timer Intensity:0~100%,Timer:0.1~999.9s

MODE

Manual Intensity (0~100%),Timer: Manual Control

Power Suppy AC 100~240V 50/60Hz

Power Consumption 15W

Cooling Method Natural Cooling

Temperature Range

Operating:+5~40℃,Storage: -15~+65℃

Weight 0.6Kg

Wavelength 365nm, 405nm

4 Installation

4.1 Capacity

Min .space required for the equipment

4.2 Dimension

Intensity %

Time S

CL10 SingleLED Controller

Item No. 1514636

SET

XS-1

AC100~240V 50/60Hz

FUSE:2AMP 250VAC

Please check the unit for any mechanical defects. If there is any shipping

damage do not install or use the equipment and immediately contact the

shipping company and supplier.

4.3 Caution

 To prevent heat damage, set the unit horizontally on a level

surface. Failure to position the unit properly may cause damage.

 Avoid placing next to high voltage equipment or next to a heat

source.

 Make sure nothing is placed on the power cable.

4.4Installation Flow

1. Place the controller horizontally on a level surface.

2. Connect power cable to controller using supplied power cable.

3. There is one LED head connector labeled <CH> under the power

button, connect LED head to <CH>.

4. Connect foot switch or PLC（optional）to connector labeled <XS-1>

Caution：Depress power switch to turn on the LED head, press

again to turn off. When using a PLC or extension cable, 0V means

the LED head is working.

5 Controller button and Operating

5.1 Component name and function

1. Power Switch：Power On/Off

2. LED head connector

3. Intensity display： Intensity setting data and information will be

shown here, easy to read and edit.

4. Time display：Time setting data and information will be shown

here, easy to read and edit.

5. Up arrow button

6. SET Button：Confirm or enter menu.

7. Down arrow button

8. Power cable connector

9. Control port：LED head control signal input.

Intensity %

Time S

CL10 Single LED Controller

Item No. 1514636

SET

POWER

XS-1

AC100~240V 50/60Hz

FUSE:2AMP 250VAC

5.2 Button and Display Instruction

5.2.1 Button Instruction

Arrow buttons：Edit settings

SET

5.2.2 Display instruction

Intensity %

Time S

5.3 Operating

5.3.1 Startup

Power

Power Switch：Power On/Off.

SET Button：Confirm or enter menu.

Intensity data information

Time data i

nformation

Warning

 Please place this equipment in a stable space.

 Avoid placing next to high voltage machinery.

 Please do not block ventilation holes.

 Do not expose to flammable gas.

 Do not use in high temperatures or extreme cold.

 To avoid electric shock, disconnect equipment from

electrical supply before servicing.



Caution

 To avoid button damage, do not press buttons with high

force.

 Prevent metallic foreign matter from entering the LED head

connector, may cause short, damage and fire.

 Don’t connect any non LED head cable to connector; it may

cause errors and damage.

5.3.2 Starting Controller

After finishing installation, plug in power cable, then press . The red LED

light inside the button will turn on when the unit is powered.

5.3.3 Working Mode

If the LED head is plugged in, the controller will automatically enter Working

Mode.

5.4 Parameter Setting

5.4.1 Intensity Setting

1. Enter working mode.

2 Press and hold up button to set intensity. (Intensity data will

flash when up button is released).

3 Press up button or down button to adjust intensity.

4 Press

SET

twice to confirm and save.

5.4.2 Time Setting

1. Enter working mode.

2. Press and hold down button to edit time. (Time data will be

flashing).

3. Press up button or down button to change intensity

value.

4. Press

SET

to confirm and move to next unit.

5. Press

SET

twice to confirm and save when finished with last unit’s

setting.

Power

Caution

All settings should be adjusted in working mode!

5.5 Working mode setting

In Working Mode, you can switch Manual/Timer mode by holding

SET

button.

In Timed Mode, the set time will be displayed. In manual mode, "oFF" will be

displayed under Time S.

5.6 Working Temperature

Press

SET

once while in working mode to show the temperature of the LED.

5.7 LED Head Unit and Foot Switch

Caution

 When both Intensity and Time data are flashing, pressing

either arrow button will allow either the intensity or time to be

changed depending on which arrow is pressed.

 Foot switch will only function in working mode.

 Controller will enter working mode automatically if the unit

is left idle in setting mode for 60 seconds.

 Please measure and define working distance properly

before using LED head.

 Don’t touch the LED tip while in use. High temperature may

cause injury.

●Press foot switch, LED head will work at set

parameters.

6 Shutdown

Step 1：Press Power button to

turn off controller, red indicator

will turn off at same time.

Step 2：Disconnect power

cable.

7 Troubleshooting

Error Cause/Demonstration Action

Please check if power

cable is plugged in

properly.

Plug in power cable

properly.

1．Display not on

when turning on

power button

Please check the fuse

Fuse type：2AMP, 250VAC

Please check if LED head

is in working status.

Exit working status, enter

settings.

2．Cannot set

parameter

LED head is not plugged in

properly

Plug in LED properly

3．LED head

working

abnormally.

Please check if

equipment is working in

your required mode.

Go to parameters and set

mode as you want.

4．No UV output

when clicking foot

switch.

Controller is not in working

mode

Make sure controller is in

working mode.

5．LED head

cannot connect with

channel’s

connector.

Please check alignment of

the groove on the main

unit and red point on the

LED head.

Please check item 3, chapter

4.4

6. Time that is

shown on LCD has

timed out, but the

LED head is still

working.

Please check if controller is

in manual mode.

Set to Time mode.

7. LED head cannot

reach setting

intensity when

working.

Please check the working

distance.

Set the working distance

properly.

8 Replacement Parts

Name

Loctite®

Item No.

Controller CL10 Single LED Controller 1514636

CL10 LED Head, 365nm, 3mm, w/2.7m cable 1540715

CL10 LED Head, 365nm, 6mm, w/2.7m cable 1538499

CL10 LED Head, 365nm, 10mm, w/2.7m cable 1538505

CL10 LED Head, 365nm, 3mm, w/5m cable 1538504

CL10 LED Head, 365nm, 6mm, w/5m cable 1538500

LED Head

CL10 LED Head, 365nm, 10mm, w/5m cable 1538501

CL10 LED Head, 405nm, 6mm, w/2.7m cable 1746633

Spare Parts

CL10 Lens for 365nm, 3mm LED Head 1538497

CL10 Lens for 365nm, 6mm LED Head 1538496

Lens

CL10 Lens for 365nm, 10mm LED Head 1538498

CL10 Lens for 405nm, 6mm LED Head 1750074

Foot Switch Foot Switch Assembly 97201

9 WARRANTY

Henkel expressly warrants that all products referred to in this Instruction Manual for

Loctite® CL10 Single LED Controller (hereafter called “Products”) shall be free from

defects in materials and workmanship. Liability for Henkel shall be limited, as its option,

to replacing those Products which are shown to be defective in either materials or

workmanship or to credit the purchaser the amount of the purchase price thereof (plus

freight and insurance charges paid therefore by the user). The purchaser’s sole and

exclusive remedy for breach of warranty shall be such replacement or credit.

A claim of defect in materials or workmanship in any Products shall be allowed only

when it is submitted in writing within one month after discovery of the defect or after the

time the defect should reasonably have been discovered and in any event, within (12)

months after the delivery of the Products to the purchaser. This warranty does not apply

to perishable items, such as (indicate items: fuses, filters, lights, etc.). No such claim

shall be allowed in respect of products which have been neglected or improperly stored,

transported, handled, installed, connected, operated, used or maintained. In the event of

unauthorized modification of the Products including, where products, parts or

attachments for use in connection with the Products are available from Henkel, the use

of products, parts or attachments which are not manufactured by Henkel, no claim shall

be allowed.

No Products shall be returned to Henkel for any reason without prior written approval

from Henkel. Products shall be returned freight prepaid, in accordance with instructions

from Henkel.

NO WARRANTY IS EXTENDED TO ANY EQUIPMENT WHICH HAS BEEN ALTERED,

MISUSED, NEGLECTED, OR DAMAGED BY ACCIDENT.

EXCEPT FOR THE EXPRESS WARRANTY CONTAINED IN THIS SECTION, HENKEL

MAKES NO WARRANTY OF ANY KIND WHATSOEVER, EXPRESS OR IMPLIED,

WITH RESPECT TO THE PRODUCTS.

ALL WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR

PURPOSE, AND OTHER WARRANTIES OF WHATEVER KIND (INCLUDING

AGAINST PATENT OR TRADEMARK INFRINGEMENT) ARE HEREBY DISCLAIMED

BY HENKEL AND WAIVED BY THE PURCHASER.

THIS SECTION SETS FORTH EXCLUSIVELY ALL OF LIABILITY FOR HENKEL TO

THE PURCHASER IN CONTRACT, IN TORT OR OTHERWISE IN THE EVENT OF

DEFECTIVE PRODUCTS.

WITHOUT LIMITATION OF THE FOREGOING, TO THE FULLEST EXTENT POSSIBLE

UNDER APPLICABLE LAWS, HENKEL EXPRESSLY DISCLAIMS ANY LIABILITY

WHATSOEVER FOR ANY DAMAGES INCURRED DIRECTLY OR INDIRECTLY IN

CONNECTION WITH THE SALE OR USE OF, OR OTHERWISE IN CONNECTION

WITH, THE PRODUCTS, INCLUDING, WITHOUT LIMITATION, LOSS OF PROFITS

AND SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES, WHETHER CAUSED

BY NEGLIGENCE FROM HENKEL OR OTHERWISE.

Henkel Corporation

One Henkel Way

Rocky Hill, CT 06067-3910

USA

Henkel Canada Corporation

2515 Meadowpine Boulevard

Mississauga, Ontario L5N 6C3

Canada

Henkel Corporation

Automotive/ Metals H.Q.

32100 Stephenson Hwy,

Madison Heights 48071

USA

Henkel Capital, S.A. de C.V.

Calzada de la Viga s/n Fracc.

Los Laureles

Loc. Tulpetlac, C.P. 55090

Ecatepac de Morelos, MEXICO

Henkel Singapore Pte Ltd

401, Commonwealth Drive

#03-01/02 Haw Par Technocentre

SINGAPORE 149598

Henkel (China) Company Ltd.

No. 928 Zhang Heng Road,

Zhangjiang, Hi-Tech Park, Pudong,

Shanghai, China 201203

Henkel Loctite Korea

8F, Mapo Tower, 418,

Mapo-dong, Mapo-gu,

Seoul, 121-734, KOREA

Henkel Japan Ltd.

27-7 Shin Isogo-cho, Isogo-ku

Yokohama, 235-0017

JAPAN

www.equipment.loctite.com

Manual P/N: 8902885, Rev A, Date: 02/19/2013

Loctite CL10 Operating instructions

Loctite CL10 Operating instructions

Loctite CL10 Operating instructions

Related papers

Other documents