Equinox Systems EQLED117 User manual

Equinox Systems
Brand
Equinox Systems
Model
EQLED117
Category
Stroboscopes & disco lights
Type
User manual

This manual is also suitable for

Equinox Systems EQLED117 is a versatile and feature-rich lighting fixture designed for uplighting and stage lighting applications. With its powerful 7 x 5W quad-color RGBW LEDs, it offers a wide color spectrum and smooth color mixing, allowing you to create vibrant and dynamic lighting effects. The fixture's compact and slim profile makes it suitable for various rigging or floor-standing applications, while the rubber feet allow for stable placement on flat surfaces.

Equinox Systems EQLED117 is a versatile and feature-rich lighting fixture designed for uplighting and stage lighting applications. With its powerful 7 x 5W quad-color RGBW LEDs, it offers a wide color spectrum and smooth color mixing, allowing you to create vibrant and dynamic lighting effects. The fixture's compact and slim profile makes it suitable for various rigging or floor-standing applications, while the rubber feet allow for stable placement on flat surfaces.

Order code: EQLED117
MaxiPar Quad
User Manual
www.prolight.co.uk MaxiPar Quad User Manual
2
Safety advice
WARNING
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL
CAREFULLY BEFORE YOUR INITIAL START-UP!
• Before your initial start-up, please make sure that there is no damage caused during transportation.
• Should there be any damage, consult your dealer and do not use the equipment.
• To maintain the equipment in good working condition and to ensure safe operation, it is necessary
for the user to follow the safety instructions and warning notes written in this manual.
• Please note that damages caused by user modications to this equipment are not subject to warranty.
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the non-observance
of this manual or any unauthorised modication to the equipment.
OPERATING DETERMINATIONS
If this equipment is operated in any other way, than those described in this manual, the product may suffer damage and
the warranty becomes void. Incorrect operation may lead to danger e.g: short-circuit, burns and electric shocks etc.
Do not endanger your own safety and the safety of others!
Incorrect installation or use can cause serious damage to people and/or property.
• Never let the power cable come into contact with other
cables. Handle the power cable and all mains voltage
connections with particular caution!
• Never remove warning or informative labels from the unit.
• Do not open the equipment and do not modify the unit.
• Do not connect this equipment to a dimmer pack.
• Do not switch the equipment on and off in short intervals,
as this will reduce the system’s life.
• Only use the equipment indoors.
• Do not expose to ammable sources, liquids or gases.
• Always disconnect the power from the mains when
equipment is not in use or before cleaning! Only handle
the power-cable by the plug. Never pull out the plug by
pulling the power-cable.
• Make sure that the available voltage is between
100~240V, 50/60Hz.
• Make sure that the power cable is never crimped or
damaged. Check the equipment and the power cable
periodically.
• If the equipment is dropped or damaged, disconnect the
mains power supply immediately and have a qualied
engineer inspect the equipment before operating again.
• If the equipment has been exposed to drastic
temperature uctuation (e.g. after transportation),
do not connect power or switch it on immediately.
The arising condensation might damage the equipment.
Leave the equipment switched off until it has reached
room temperature.
• If your product fails to function correctly, stop use
immediately. Pack the unit securely (preferably in the
original packing material), and return it to your Pro Light
dealer for service.
• Only use fuses of same type and rating.
• Repairs, servicing and power connection must only be
carried out by a qualied technician. THIS UNIT CONTAINS
NO USER SERVICEABLE PARTS.
• WARRANTY: One year from date of purchase.
CAUTION!
KEEP THIS EQUIPMENT
AWAY FROM RAIN,
MOISTURE AND LIQUIDS
CAUTION!
TAKE CARE USING
THIS EQUIPMENT!
HIGH VOLTAGE-RISK
OF ELECTRIC SHOCK!!
www.prolight.co.uk MaxiPar Quad User Manual
3
Product overview & technical specications
This compact, slim prole par is designed for uplighting as well as stage lighting, and will bring deep,
rich colours to any event or venue. It features 7 x 5W quad-colour RGBW LEDs which offer smooth colour mixing.
Operational modes including DMX, auto, sound active and master/slave modes.
• 7 x 5W quad-colour LEDs (RGBW)
• Beam angle: 25°
• 1,554 Lux @ 2m (full on)
• DMX channels: 2/3/3/4
or 10 selectable
• Auto, sound active and
master/slave modes
• 0-100% dimming
and variable strobe
• 4 push button menu
with LED display
• Bracket allows for multiple rigging
or oor standing applications
• Rubber feet allow the panel to
sit at on the oor for uplighting
• Side entry XLR and
power connections
• IEC power input/output
• 3-Pin XLR input/output
• Fan cooled
• Supplied with IR remote
MaxiPar Quad
Specications
Power consumption 35W
Power supply 100~240V, 50/60Hz
Fuse F1A 250V
Dimensions 215 x 225 x 110mm
Weight 1.1kg
Order code EQLED117
215mm
225mm 110mm
0m 1m 2m 3m 4m 5m
25° - Lux
FULL ON
R
G
B
W
6216
1888
2448
656
3400
1554
472
612
164
850
690
209
272
72.8
377
25°
388
118
153
41
212
248
75.5
97.9
26.2
136
QUAD
MAXIPAR
DOWNUP
MIC
MENU ENTER
www.prolight.co.uk
POWER OUTPUT:
100-240V~50/60Hz
DMX OUTPUT
POWER INPUT:
100-240V~50/60Hz
FUSE: F1A 250V
DMX INPUT
POWER CONSUMPTION: 35W
DOWNUP
MIC
MENU ENTER DOWNUP
MIC
MENU ENTER
06
0907
08
10
QUAD
MAXIPAR
DOWNUP
MIC
MENU ENTER
www.prolight.co.uk
POWER OUTPUT:
100-240V~50/60Hz
DMX OUTPUT
POWER INPUT:
100-240V~50/60Hz
FUSE: F1A 250V
DMX INPUT
POWER CONSUMPTION: 35W
DOWNUP
MIC
MENU ENTER DOWNUP
MIC
MENU ENTER
02 02
01 01
04
03
05
01 - Bracket
02 - Bracket knobs
03 - LED display
04 - Function buttons
05 - Microphone
06 - DMX input socket
07 - DMX output socket
08 - IEC power input socket
09 - IEC power output socket
10 - Fuse F1A 250V
In the box: 1 x xture,
1 x power cable &
1 x user manual
www.prolight.co.uk MaxiPar Quad User Manual
4
Operating instructions
MENU
S L A V
Slave mode
d 0 0 1
d 5 1 2
DMX settings
A d d r
3 - 1 C
3 - 2 C
4 C H
1 0 C H
2 C H
Built in programs
P r - -
r 0 0 0
g 0 0 0
r 2 5 5
g 2 5 5
b 0 0 0
u 0 0 0
b 2 5 5
u 2 5 5
Colour mix mode
P r 0 6
P r 0 1
P r 0 0
S t A t
S 0 1
S 1 7
Static colour mode
S P E E
S P 1
S P 9
Built in program speed setting
S E n S
S E 1
S E 9
Sound sensitivity setting
d I N N
d I 1
d I 9
Master dimmer
F A I L
o F F
o n
DMX fail setting
I n F r
o F F
o n
IR remote setting
S o u n
S o 0 1
S o 0 6
Sound mode
www.prolight.co.uk MaxiPar Quad User Manual
5
Operating instructions
DMX mode:
Operating in a DMX control mode environment gives the user the greatest exibility when it comes
to customising or creating a show. In this mode you will be able to control each individual trait of
the xture and each xture independently.
To access the DMX mode, press the “MENU” button and use the “UP” and “DOWN” buttons to show
Addr on the LED display. Now press the “ENTER” button and use the “UP” and “DOWN” buttons to
choose one of the 2/3/3/4 or 10 DMX channel modes.
Press the “ENTER” button and use the “UP” and “DOWN” buttons to set the required DMX address.
Press the “ENTER” button to conrm the setting.
To exit out of any of the above options, press the “MENU” button.
3-2 channel mode:
Channel Value Function
CH1 000-255 Red dimmer (0-100%)
CH2 000-255 Green dimmer (0-100%)
CH3 000-255 Blue dimmer (0-100%)
4 channel mode:
Channel Value Function
CH1 000-255 Red dimmer (0-100%)
CH2 000-255 Green dimmer (0-100%)
CH3 000-255 Blue dimmer (0-100%)
CH4 000-255 White dimmer (0-100%)
2 channel mode:
Channel Value Function
CH1 000-255 Master dimmer (0-100%)
CH2
000-009 No function
010-019 Red
020-029 Green
030-039 Blue
040-049 White
050-059 Yellow
060-069 Magenta
070-079 Cyan
080-089 Dark Orange
090-099 Lime Green
100-109 Salmon Pink
110-119 Turquoise
120-129 Mint Green
130-139 Orange
140-149 Lavender
150-159 Light Blue
160-169 Dark Blue
170-255 Pink
3-1 channel mode:
Channel Value Function
CH1
000-009 No function
010-050 Program 1 (4 colour fade in/out)
051-091 Program 2 (7 colour fade in/out)
092-132 Program 3 (colour fade)
133-173
Program 4
(7 colour fade in/out + colour fade)
174-214 Program 5 (4 colour change)
215-255 Program 6 (7 colour change)
CH2
000-009 No function
010-050 Sound 1 (4 colour fade in/out)
051-091 Sound 2 (7 colour fade in/out)
092-132 Sound 3 (colour fade)
133-173
Sound 4
(7 colour fade in/out + colour fade)
174-214 Sound 5 (4 colour change)
215-255 Sound 6 (7 colour change)
CH3 000-255
Speed of Programs 1-6 (slow-fast)
Sensitivity of Sound 1-6 (low-high)
www.prolight.co.uk MaxiPar Quad User Manual
6
Operating instructions
10 channel mode:
Channel Value Function
CH1 000-255 Master dimmer (0-100%)
CH2
000 No function
001-255 Strobe (slow-fast)
CH3 000-255 Red dimmer (0-100%)
CH4 000-255 Green dimmer (0-100%)
CH5 000-255 Blue dimmer (0-100%)
CH6 000-255 White dimmer (0-100%)
CH7
000-009 No function
010-019 Red
020-029 Green
030-039 Blue
040-049 White
050-059 Yellow
060-069 Magenta
070-079 Cyan
080-089 Dark Orange
090-099 Lime Green
100-109 Salmon Pink
110-119 Turquoise
120-129 Mint Green
130-139 Orange
140-149 Lavender
150-159 Light Blue
160-169 Dark Blue
170-255 Pink
Channel Value Function
CH8
000-009 No function
010-050 Program 1 (4 colour fade in/out)
051-091 Program 2 (7 colour fade in/out)
092-132 Program 3 (colour fade)
133-173
Program 4
(7 colour fade in/out + colour fade)
174-214 Program 5 (4 colour change)
215-255 Program 6 (7 colour change)
CH9
000-009 No function
010-050 Sound 1 (4 colour fade in/out)
051-091 Sound 2 (7 colour fade in/out)
092-132 Sound 3 (colour fade)
133-173
Sound 4
(7 colour fade in/out + colour fade)
174-214 Sound 5 (4 colour change)
215-255 Sound 6 (7 colour change)
CH10 000-255
Speed of Programs 1-6 (slow-fast)
Sensitivity of Sound 1-6 (low-high)
Static colour mode:
To access the static colour mode press “MENU” until Stat shows on the LED display.
Now press the “ENTER” button and use the “UP” and “DOWN” buttons to select the colour required
between S 01 ~ S 17. Press the “ENTER” button to conrm.
To exit out of any of the above options, press the “MENU” button.
S 01 - Red
S 02 - Green
S 03 - Blue
S 04 - White
S 05 - Yellow
S 06 - Magenta
S 07 - Cyan
S 08 - Dark Orange
S 09 - Lime Green
S 10 - Salmon Pink
S 11 - Turquoise
S 12 - Mint Green
S 13 - Orange
S 14 - Lavender
S 15 - Light Blue
S 16 - Dark Blue
S 17 - Pink
www.prolight.co.uk MaxiPar Quad User Manual
7
Colour mix mode:
In this mode you can set the xture to any colour and any brightness.
To access the colour mix mode press “MENU” until the display shows Pr-- on the LED display.
Press the “ENTER” button and use the “UP” and “DOWN” buttons to select Pr00.
Press the “ENTER” button to show r--- with 3 digits after on the LED display.
Press the “ENTER” button to conrm.
The r represents red, G= green, b= blue and u= white.
The 3 digits after are the brightness setting from 000 ~ 255.
For example:
If you set r, G, b and u all to zero, your unit will have no LEDs lit up (blackout).
If you set r000 to r255 and G, b and u to zero, your unit will show only red LEDs.
Press the “ENTER” button to conrm the setting and move to the next colour.
To exit out of any of the above options, press the “MENU” button.
Built-in program mode:
To access built-in program mode press “MENU” until the display shows Pr-- on the LED display.
Press the “ENTER” button and use the “UP” and “DOWN” buttons to select between Pr01 ~ Pr06.
Press the “ENTER” button to conrm.
To exit out of any of the above options, press the “MENU” button.
Built-in program speed setting:
To access built-in program speed setting press “MENU” until the display shows SPEE on the
LED display. Press the “ENTER” button and use the “UP” and “DOWN” buttons to select between
SP 1 (slow) ~ SP 9 (fast).
Press the “ENTER” button to conrm.
To exit out of any of the above options, press the “MENU” button.
Sound mode:
To access sound mode press “MENU” until the display shows Soun on the LED display.
Press the “ENTER” button and use the “UP” and “DOWN” buttons to select between So01 ~ So06.
Press the “ENTER” button to conrm.
To exit out of any of the above options, press the “MENU” button.
Pr01 - 4 colour fade in/out
Pr02 - 7 colour fade in/out
Pr03 - Colour fade
Pr04 - 7 colour fade in/out
+ colour fade
Pr05 - 4 colour change
Pr06 - 7 colour change
So01 - 4 colour fade in/out
So02 - 7 colour fade in/out
So03 - Colour fade
So04 - 7 colour fade in/out
+ colour fade
So05 - 4 colour change
So06 - 7 colour change
Operating instructions
www.prolight.co.uk MaxiPar Quad User Manual
8
Operating instructions
Sound sensitivity setting:
To access sound sensitivity setting press “MENU” until the display shows SEns on the
LED display. Press the “ENTER” button and use the “UP” and “DOWN” buttons to select between
SE 1 (low) ~ SE 9 (high).
Press the “ENTER” button to conrm.
To exit out of any of the above options, press the “MENU” button.
Master dimmer setting:
To access master dimmer setting press “MENU” until the display shows dINN on the LED display.
Press the “ENTER” button and use the “UP” and “DOWN” buttons to select between
dI 1 (low brightness) ~ dI 9 (high brightness). Press the “ENTER” button to conrm.
To exit out of any of the above options, press the “MENU” button.
DMX fail setting:
To access DMX fail setting press “MENU” until the display shows FAIL on the LED display.
Press the “ENTER” button and use the “UP” and “DOWN” buttons to select between
on (when no DMX signal unit goes into last used program or sound mode) ~
off (when no DMX signal unit goes into blackout).
Press the “ENTER” button to conrm.
To exit out of any of the above options, press the “MENU” button.
Master/slave mode:
The default setting for this xture is Master. Set the master unit in one of the built-in programs, sound
modes, colour mix mode or static colour mode.
To set the slave unit, press the “MENU” button on the front of the master unit to show SLav
on the LED display. The unit is now in Slave mode.
To exit out of any of the above options, press the “MENU” button.
Please ensure that all slave units are set to the same DMX channel mode as the master unit.
IR remote setting:
To access IR remote setting press “MENU” until the display shows Infr on the LED display.
Press the “ENTER” button and use the “UP” and “DOWN” buttons to select between
on (IR receiver on) ~ off (IR receiver off).
Press the “ENTER” button to conrm.
To exit out of any of the above options, press the “MENU” button.
www.prolight.co.uk MaxiPar Quad User Manual
9
Operating instructions
BLACK
O U T
AUTO S O UND
STROBE S P EED
SE NSI-
T I VIT Y
%
DMX
MA NUAL
FADE
UNIT
R
B
G
A W
P
UV
0
31 2
4 5 6
8 9
+
7
07
01
02
04
08
10
11
05
09
03
06
12
11
A B C
D
IR remote functions:
A - Red B - Green C - Blue D - White
01 - Sets the unit into blackout off/on (LED on/off)
02 - Activates the built-in programs, use the ‘+’ and ‘–’
buttons to select the auto mode. Pressing the ‘Speed’
button followed by the ‘+’ and ‘–’ buttons will then allow
the auto mode speed to be adjusted
03 - Activates the sound modes, use the ‘+’ and ‘–’ buttons
to select the sound mode. Pressing the ‘Sensitivity’ button
followed by the ‘+’ and ‘–’ buttons will then allow the
sound sensitivity be adjusted
04 - Activates the strobe, use the ‘+’ and ‘–’ buttons
to adjust the strobe speed
05 - Sets the auto mode speed. Press this button followed by
the ‘+’ and ‘–’ buttons to adjust the program speed
06 - Sets the sound mode sensitivity. Press this button
followed by the ‘+’ and ‘–’ buttons to adjust the
sound sensitivity
07 - Activates the DMX mode
Please note: the DMX address and channel must
be preset in the menu
08 - Activates the static colour/manual modes, use the
‘+’ and ‘–’ buttons to select a colour from the pre-
programmed static colours or use the ‘R’, ‘G’, ‘B’ or ‘W’
buttons to create a manual colour. Pressing the ‘Fade/unit’
button allows the chosen colour to enter the fade program
09 - Activates a fade in/out on the manual colour selection
10 - Manual colour selection
11 - Adjusts the auto mode, sound mode, speed,
sound sensitivity, strobe speed and static colour/manual
colour modes
12 - Sets the brightness of auto, sound, static colour and
manual modes (1 - low brightness, 9 - high brightness)
www.prolight.co.uk MaxiPar Quad User Manual
10
Setting the DMX address:
The DMX mode enables the use of a universal DMX controller. Each xture requires a “start address”
from 1- 512. A xture requiring one or more channels for control begins to read the data on the channel
indicated by the start address. For example, a xture that occupies or uses 7 channels of DMX and was
addressed to start on DMX channel 100, would read data from channels: 100, 101, 102, 103, 104,
105 and 106. Choose a start address so that the channels used do not overlap. E.g. the next unit in
the chain starts at 107.
DMX 512:
DMX (Digital Multiplex) is a universal protocol used as a form of communication between intelligent
xtures and controllers. A DMX controller sends DMX data instructions form the controller to the xture.
DMX data is sent as serial data that travels from xture to xture via the DATA “IN” and DATA “OUT”
XLR terminals located on all DMX xtures (most controllers only have a data “out” terminal).
DMX linking:
DMX is a language allowing all makes and models of different manufactures to be linked together
and operate from a single controller, as long as all xtures and the controller are DMX compliant.
To ensure proper DMX data transmission, when using several DMX xtures try to use the shortest
cable path possible. The order in which xtures are connected in a DMX line does not inuence the
DMX addressing. For example; a xture assigned to a DMX address of 1 may be placed anywhere in
a DMX line, at the beginning, at the end, or anywhere in the middle. When a xture is assigned a
DMX address of 1, the DMX controller knows to send DATA assigned to address 1 to that unit,
no matter where it is located in the DMX chain.
DATA cable (DMX cable) requirements (for DMX operation):
This xture can be controlled via DMX-512 protocol. The DMX address is set on the back of the unit.
Your unit requires either a standard 3-pin or 5-pin XLR connector for data input/output,
see images below.
Also remember that DMX cable must be daisy chained and cannot be split.
DMX setup
Further DMX cables can be purchased from all good sound and lighting suppliers or Prolight Concepts dealers.
Please quote:
CABL10 – 2m CABL11 – 5m CABL12 – 10m3-Pin:
CABL185 – 2m CABL187 – 5m CABL188 – 10m5-Pin:
www.prolight.co.uk MaxiPar Quad User Manual
11
Notice:
Be sure to follow the diagrams below when making your own cables.
Do not connect the cables shield conductor to the ground lug or
allow the shield conductor to come in contact with the XLRs
outer casing. Grounding the shield could cause a short circuit
and erratic behaviour.
Line termination:
When longer runs of cable are used,
you may need to use a terminator on
the last unit to avoid erratic behaviour.
Using a cable terminator will decrease
the possibilities of erratic behaviour.
(3-pin - Order ref: CABL90,
5-pin - Order ref: CABL89)
5-pin XLR DMX connectors:
Some manufactures use 5-pin XLR connectors for data transmission in place of 3-pin. 5-pin XLR xtures
may be implemented in a 3-pin XLR DMX line. When inserting standard 5-pin XLR connectors in to a
3-pin line a cable adaptor must be used. The diagram below details the correct cable conversion.
5-pin XLR (female)
Pin 1: GND (screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
Pin 4: N/C
Pin 5: N/C
3-pin XLR (female)
Pin 1: GND (screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
3-pin XLR (male)
Pin 1: GND (screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
5-pin XLR (male)
Pin 1: GND (screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
Pin 4: N/C
Pin 5: N/C
DMX setup
Termination reduces signal
transmission problems and
interference. It is always
advisable to connect a DMX
terminal, (resistance 120
Ohm 1/4W) between pin 2
(DMX-) and pin 3 (DMX+) of
the last xture.
5-Pin
1
2 4
5
3
3-Pin
1 2
3
Pin Conguration
3-Pin 5-Pin
Pin 1 - Ground
Pin 2 - Negative
Pin 3 - Positive
– Pin 4 - N/C
– Pin 5 - N/C
1
2
3
1
2
3
DMX 512
3-Pin XLR output
DMX 512
3-Pin XLR input
GROUND
DMX +
DMX –
DMX 512
5-Pin XLR output
DMX 512
5-Pin XLR input
1
2
4
5
3
1
2
4
5
3
GROUND
N/C
DMX –
N/C
DMX +
1 ground
3 hot
2 cold
3-Pin XLR male 3-Pin XLR female
2 cold
3 hot
1 ground
2 cold
1 ground 5 N/C
3 hot
4 N/C
5-Pin XLR male 5-Pin XLR female
4 N/C
5 N/C 1 ground
3 hot
2 cold
www.prolight.co.uk MaxiPar Quad User Manual
12
Multiple xture power linking
Power linking:
This xture provides power linking via the power output on the rear allowing multiple units to be
connected together. The maximum number of xtures that can be connected is 24 xtures @ 240V
or 12 xtures @ 120V (including the rst xture). After the maximum number of xtures are
connected a new power run will need to be started.
Please note: Caution should be used when power linking other xtures to the MaxiPar Quad as the
power consumption of other xtures will vary. Fixtures tted with lamps often require 2/3 times more
current on startup, these may require their own power source.
www.prolight.co.uk MaxiPar Quad User Manual
13
WEEE notice
Correct Disposal of this Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries
with separate collection systems)
This marking shown on the product or its literature, indicates that it should not be disposed of
with other household wastes at the end of its working life. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, please separate this from other
types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their
local government ofce, for details of where and how they can take this item for environmentally
safe recycling.
Business users should contact their supplier and check the terms and conditions of the
purchase contract. This product should not be mixed with other commercial wastes for disposal.
www.prolight.co.uk MaxiPar Quad User Manual
14
www.prolight.co.uk MaxiPar Quad User Manual
15
www.prolight.co.uk MaxiPar Quad User Manual
16
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16

Equinox Systems EQLED117 User manual

Equinox Systems
Brand
Equinox Systems
Model
EQLED117
Category
Stroboscopes & disco lights
Type
User manual
This manual is also suitable for

Equinox Systems EQLED117 is a versatile and feature-rich lighting fixture designed for uplighting and stage lighting applications. With its powerful 7 x 5W quad-color RGBW LEDs, it offers a wide color spectrum and smooth color mixing, allowing you to create vibrant and dynamic lighting effects. The fixture's compact and slim profile makes it suitable for various rigging or floor-standing applications, while the rubber feet allow for stable placement on flat surfaces.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents