English
1
1. Package Contents:
TwinWheel FX/FXE steering wheel
TwinWheel FX/FXE pedal
Driver CD
Mounting clamp (Y typed)
Multi-language user's guide
2. System Requirements:
For PC
IBM PC Pentium 166MHz compatibles or higher.
Microsoft Windows VISTA/XP/ME/2000/98
CD/DVD-ROM Drive for driver installation.
For PlayStation
PlayStation 3
3. Adjustable wheel:
The TwinWheel FX/FXE steering wheel can be set to the following angles.
4. Setting-up your TwinWheel FX/FXE series
Connect and tightly screw the ‘’Y-typed’’ mounting clamp to the edge of the table through
the two hidden holes in front of the wheel’s chassis.
5. Installation
Installation for PC system
a. Turn the computer on and insert the driver’s disc into the CD-ROM drive, then the
setup program will start automatically. If it doesn’t, start the setup
program manually by selecting Start/Run and type in “E:\setup” (where
“E” represents the location of the CD-ROM drive), then press the Enter
key.
b. Follow the instructions on the screen to finish the driver installation.
c. After the installation is completed, you can plug in the USB connector of
the cable to the USB port on your computer. TwinWheel FX/FXE
wheel will recognize that you have plugged it into the PC system
automatically as the DIGITAL mode LED indicator will be lit. Depending
on your requirement, press “MODE” button to shift to “ANALOG” mode
or “DIGITAL” mode, and the LED indicators will be lit according to your
selection.
d. Note: Turn your USB Hub on after connecting this device
﹐
because it needs at least 500mA to operate the
vibration feature.
e. Click Start / Setting / Control Panel and double click on “Game controller” or “Gaming Options” icon.
f. Plug in the pedal’s connector to the steering wheel.
g. You can calibrate and test your game controller in the “Game controller” or “Gaming Options” screen and
complete the installation.
Important:
a. The driver will work with DirectX 7.0a or newer version in your PC
system. Check the DirectX version on your system, and upgrade if
necessary.
b. The vibration effect occurs according to game software.
Installation for PlayStation 3
a. Turn the Playstation 3 on and plug in TwinWheel FX/FXE’s USB
cable to the PlayStation 3.
b. TwinWheel FX/FXE will recognize you have plugged it into
PlayStation 3 and the PlayStation 3 mode LED indicator will be lit
automatically.
c. When you finish the connection, you can play any game now.
d. The game controller’s function is according to the game software you are using.
Important: The vibration feature only works in PC systems.
6. Operation and function
Basic button function setting
There are 13 functioning buttons built in to the TwinWheel FX/FXE, and each button has a different function
depending on your game software.
PC PlayStation
Eight way D-Pad Eight-way D-Pad
Button 1, 2, 3, 4
Χ,○,□, △
Button 5, 6, 7, 8, 11, 12, 13 L1, R1, L2, R2, L3, R3, PS
Button 9, 10 Select, Start
MODE Button (DIGITAL/ANALOG mode shift button)
PS
LED indicator
DIGITAL (PC-Digital Mode)/ANALOG (PC-Analog Mode)/ PS (PlayStation 3 Mode)
7
7
5
5
0
0
6
6
0
0
0
0
4
4
5
5
0
0
3
3
0
0
0
0
1
1
5
5
0
0
0
0
0
0
-
-
9
9
0
0
0
0
P
P
l
l
a
a
y
y
S
S
t
t
a
a
t
t
i
i
o
o
n
n
3
3