OVERVIEW
2A Multimedia Surface Mount Boxes can be
mounted utilizing a wide variety of methods.
The two larger models mount on standard
single and double-gang NEMA or European
type service boxes. All models can be affixed
to solid surfaces such as drywall or wooden
baseboards, or modular furniture partitions.
The three sizes also feature easy to remove
knock-outs that make them fully compatible
with Wiremold surface raceways. The two
larger models feature integral fiber storage
loops that maintain bend radius requirements
and provide one meter of fiber storage. All
Multimedia boxes feature a front loading
snap-in design and utilize 2A size
Communication modules.
PART NUMBER DESCRIPTION
CM-MMB-231 1 Insert Box (400/800 Raceway KO’s)
CM-MMB-291 1 Insert Box (2700/2800 Raceway KO’s)
CM-MMB-571 1 Insert Box (500/700 Raceway KO’s)
CM-MMB-232 2 Insert Box (400/800/2300/2300D Raceway KO’s)
CM-MMB-292 2 Insert Box (2700/2800/2900 Raceway KO’s)
CM-MMB-233 3 Insert Box (400/800/2300/2300D Raceway KO’s)
CM-MMB-293 3 Insert Box (2700/2800/2900 Raceway KO’s)
©
Copyright 2005 Wiremold / Legrand All Rights Reserved
Wiremold / Legrand
U.S. and International:
60 Woodlawn Street • West Hartford, CT 06110
1-800-621-0049 • FAX 860-232-2062 • Outside U.S. 860-233-6251
Canada:
570 Applewood Crescent • Vaughan, Ontario L4K 4B4
1-800-723-5175 • FAX 905-738-9721
41991R1 – Updated July 2005 – For latest specs visit www.wiremold.com
2A Multimedia
Surface Mount Boxes
INSTALLATION INSTRUCTIONS
Installation Instruction No.: 41991R1 – Updated July 2005
Instruction sheets are intended as an aid only in the installation
of described products. The Wiremold Company does not
assume any liability due to the physical misuse or inappropriate
application of the products described herein.
RACEWAY APPLICATIONS
Recommended Cable Routing
WALL APPLICATIONS
STANDARD MOUNTING HOLE DESIGNATION
NEMA SINGLE GANG
NEMA DOUBLE GANG
CABLE TIE ACCESS
EUROPEAN
(All attachment other than listed four screws recommended)
j
Wiremold Electrical Systems conform to and should be
installed and properly grounded in compliance with
requirements of the current National Electrical Code,
Canadian Electrical Code, or codes administered by
local authorities.
All electrical products may represent possible shock or
fire hazard if improperly installed or used. Wiremold
electrical products are UL listed, made for interior use
only, and should be installed in conformance with
current local and/or the National Electrical Code.
2A Multimedia Surface Mount Boxes
For 400BAC, 800BAC, 2300BAC, 2300BACD Raceway Systems
For 2700, 2800, 2900 Raceway Systems
For 500, 700 Raceway Systems
ASSEMBLY – All Boxes
2
1
3
4
2
1
3
4
2
1
3
4
#6 Screw
#6 Screw
DISASSEMBLY – 2 and 3 Module Box
DISASSEMBLY – 1 Module Box
500 RACEWAY
700 RACEWAY
2300/2300D RACEWAY
400 RACEWAY
800 RACEWAY
TWIST
TOWARD
INSIDE
TWIST TOWARD INSIDE
TWIST TOWARD INSIDE
TWIST
TOWARD
INSIDE
2900 RACEWAY
2800 RACEWAY
2700 RACEWAY
TWIST
TOWARD
INSIDE
TWIST TOWARD INSIDE
A
B
C
A
B
RACEWAY TAB REMOVAL GUIDE
1
1
2
2
3
3
4
4
RACEWAY
400
500
700
800
2300
2700
2800
2900
REMOVE TABS
NONE
1
1
1
1,2,3,4
NONE
1
1,2
-
1
-
2
Legrand 400, 800 & 2300 Series Power-Rated Raceway 2A Multimeda Surface Mount Boxes Installation guide
- Type
- Installation guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Legrand 25AM10FO FiberReady Entrance Fitting for Tele-Power Pole Systems 25DTP and AMDTP Series Installation guide
-
-
-
-
-
-
-
Legrand 700WH Installation guide
-
-
Other documents
-
Novus Pura Line Multipupose Box Datasheet
-
Carlon A243F-CAR User manual
-
Master Lock 175DLH User guide
-
-
Legrand Wiremold OFRBC-8R Specification
-
Wiremold V57240 User manual
-
-
PAC BKMM1 Operating instructions
-
Hubbell Premise Wiring HWS772050 Installation guide
