Toro Sunshade Kit, TimeCutter Riding Mower Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Toro Sunshade Kit, TimeCutter Riding Mower Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
FormNo.3436-462RevB
SunshadeKit
forTimeCutter
®
RidingMowers
ModelNo.140-2054
InstallationInstructions
1.Parkthemachineonalevelsurface,disengage
theblade-controlswitch,andmovethe
motion-controlleversoutwardtothePARK
position.
2.Shutofftheengine,removethekey,andwait
forallmovingpartstostopbeforeleavingthe
operatingposition.
3.Supporttherearofthemachinewithjackstands
andremovethereartires.
4.Securethereceiverbracketstothefront2holes
intheframeusing2bolts(1/2inchx1-1/8
inch)andsplitlockwashers(Figure1).Ifyour
machineisnotequippedwithaROPS,insertthe
spacerplateasshowninFigure1.
Important:Ensurethatyoudonotpinch
anycablesorfuellineswheninstallingthe
receiverbracket.
g309688
Figure1
1.Bolt(1/2inchx1-1/8inch)4.Spacerplate(optional)
2.Splitlockwasher(1/2inch)
5.Receiverbracket
3.Frame
5.Looselysecuretheouterholesofthefrontbow
tothesecondholesoftherearbowusing2bolts
(1/4x5/8inch)andlocknuts(Figure2).
Note:Ensurethattheendsofthefrontboware
ontheoutsideoftherearbow.
g309689
Figure2
1.Bolt(1/4x5/8inch)
4.Topbow
2.Locknut5.Frontbow
3.Rearbow
6.Looselysecurethetopbowtothefrontandrear
bowusing2bolts(1/4x5/8inch)andlocknuts
(Figure2).
7.Anglethetopbowapproximately10cm(4
inches)forwardofverticalandtightenthe
fasteners.
8.Looselysecurethebracestothepostsusing2
bolts(1/4x1-1/4inches),washers,andlocknuts
(Figure3).
©2020—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.Toro.com.
OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved
*3436-462*B
g309690
Figure3
1.Bolt(1/4x5/8inch)6.Bolt(1/4x1-1/4inches)
2.Locknut(1/4inch)7.Locknut(1/4inch)
3.Bolt1/4x5/8inchand
locknut(1/4inch)
8.Bolt(1/4x1inch)
4.Brace9.Post
5.Washer(1/4inch)
9.Looselysecurethetopsofthebracesandposts
totherearbowusing4bolts(1/4x5/8inch)and
locknuts(Figure3).
10.Installtheremaining2bolts(1/4x1inch)
throughthebottomholesonthebracesand
securethemwithlocknuts(Figure3).
11.Insertthepostsintothereceiverbrackets.
Note:Applywaxtotheendsofthepostsfor
easeofinsertionandremoval.
Important:Removethesunshadebefore
haulingthemachine.
12.Tightenallofthefasteners.
13.Securetherearscreentotherearbowand
posts(Figure4).
g309691
Figure4
1.Rearscreen
14.Slipthesunshadeoverthefrontbowandpull
itbackovertherearbow(Figure5).Anglethe
topbowupordowntotightenorloosenthe
sunshade.
g309692
Figure5
1.Sunshade
15.Installthepreviouslyremovedwheels;torque
thelugnutsto95to122N∙m(70to90ft-lb).
2
/