Toro Weight Kit, Commercial Walk-Behind/Stand-On Mowers Installation guide

Type
Installation guide

Toro Weight Kit, Commercial Walk-Behind/Stand-On Mowers is designed to improve handling, balance, and performance of your Toro mower. The kit includes weights that can be added or removed to create optimized performance under different mowing conditions and for operator preference.

Here are some of the benefits of using the Toro Weight Kit:

  • Improved handling and balance: The weights help to improve the handling and balance of your mower, making it easier to maneuver and control.
  • Enhanced performance: The weights can help to improve the performance of your mower by providing additional traction and stability. This can be especially beneficial when mowing on slopes or in wet conditions.

Toro Weight Kit, Commercial Walk-Behind/Stand-On Mowers is designed to improve handling, balance, and performance of your Toro mower. The kit includes weights that can be added or removed to create optimized performance under different mowing conditions and for operator preference.

Here are some of the benefits of using the Toro Weight Kit:

  • Improved handling and balance: The weights help to improve the handling and balance of your mower, making it easier to maneuver and control.
  • Enhanced performance: The weights can help to improve the performance of your mower by providing additional traction and stability. This can be especially beneficial when mowing on slopes or in wet conditions.
FormNo.3365-187RevA
WeightKit
CommercialWalk-Behind/Stand-OnMowers
ModelNo.117-3620
InstallationInstructions
Note:Determinetheleftandrightsidesofthemachinefromthenormaloperatingposition.
Weightsareinstalledtoimprovehandling,balanceand
improveperformance.Weightscanbeaddedorremoved
tocreateoptimizedperformanceunderdifferentmowing
conditionsandforoperatorpreference(Figure1).
Itisrecommendedthatweightsbeadded,relocatedor
removedoneatatimeuntilthedesiredhandlingandbalance
isachieved.
WARNING
Excessiveweightchangescaneffecthandlingand
operationofthemachine.Thiscouldcauseserious
injurytoyouorbystanders.
Makesureweightchangesissmallincrementsonly.
Evaluatethemuferaftereachweightchangeto
ensurethemachinecanbeoperatedsafely.
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
Description
Qty.
Use
Weight1
Carriagebolt(3/8x4inches)
2
Carriagebolt(3/8x5inches)
2
Carriagebolt(3/8x6inches)
2
Flangenut(3/8inch)
2
Installtheweight.
©2012—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.T oro.com.
OriginalInstructions(EN)
PrintedintheUSA.
AllRightsReserved
InstallingtheWeight
1.DisengagethePTO,stoptheengine,removethekey,
andwaitforallmovingpartstostopbeforeleavingthe
operatingposition.
2.Allowtheengineandmufertocoolbeforeinstalling
thiskit.
3.Determinethesizeofboltneededtoinstalltheweights.
Usethefollowingtabletodeterminethelengthofthe
boltneededforthenumberofweightsyouwillbe
installing.
Sizeofbolttouse:
Numberweightstoinstall
3/8x4inches
1
3/8x5inches
2
3/8x6inches
3
WARNING
Contactwithhotsurfacesmaycausepersonal
injury.
Allowthemuferandenginetocoolbefore
installingthiskit.
Keephands,feet,face,clothingandother
bodypartsawayfromahotmuferand
engine.
4.Raisetheheight-of-cutlevertotheappropriateposition
toallowthebestclearancesfortheremovaland
installationoffasteners.
5.Removethe4muferguardbolts.Adjusttheguard
positionasneededtoremovethebolts(Figure1).
6.Installthenewboltsthroughthemuferguardand
throughtheclampbar.
7.Installtheweightontotheboltswiththeclampbarin
placebehindtheweight(Figure1).
8.Looselyinstallthenutsandslidethemuferguardleft
orrighttocentertheexhaustoutlettubeinthecenter
ofthemuferguardopening.
9.Tightenthefournutsandensurethemuferexhaust
tubeiscenteredinthemuferguardopening(Figure1).
10.Operatetheheight-of-cutleverthroughfullrangeto
verifyclearanceofthepartsaroundthemuferand
guard.
Figure1
1.Flangenut
4.Muferguard
2.Weight5.Bolt
3.Clampbar6.Centertheexhaustoutlet
tubeinthecenterofthe
muferguardopening
2
  • Page 1 1
  • Page 2 2

Toro Weight Kit, Commercial Walk-Behind/Stand-On Mowers Installation guide

Type
Installation guide

Toro Weight Kit, Commercial Walk-Behind/Stand-On Mowers is designed to improve handling, balance, and performance of your Toro mower. The kit includes weights that can be added or removed to create optimized performance under different mowing conditions and for operator preference.

Here are some of the benefits of using the Toro Weight Kit:

  • Improved handling and balance: The weights help to improve the handling and balance of your mower, making it easier to maneuver and control.
  • Enhanced performance: The weights can help to improve the performance of your mower by providing additional traction and stability. This can be especially beneficial when mowing on slopes or in wet conditions.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI