Vax Pure Air 200 Air Purifier Owner's manual

Brand: Vax

Model: Pure Air 200 Air Purifier

Category: Air purifiers

Type: Owner's manual

AC02AMV1

LET’S GET STARTED

PureAir

200

This air purier is intended for household use only and NOT for commercial or industrial use.

• Only use the air purier indoors and keep away from wet areas.

• Keep ngers, hair and loose clothing away from moving parts and openings whilst using the air purier.

• This air purier can be operated by children aged from 8 years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience and knowledge, if they have been given supervision or

instruction concerning use of the air purier in a safe way and understand the hazards involved. Children

shall not play with the air purier.

• Cleaning and user maintenance shall not be made by children without supervision.

• Always position the air purier on a at, stable, solid surface and never over stretch the power cord.

• Position the air purier where dirty air is not drawn across your body or head while sitting or sleeping.

✘ Don’t

• Place the air purier near sources of heat, such as stove tops, ovens, radiators, open res, candles or computers.

• Move or tilt the air purier when in use.

• Use the air purier if the power cord or plug is damaged. Please contact our Customer Service Line

on 0330 026 8455.

• Use the air purier if it has been dropped, damaged or left outdoors.

• Run the power cord under rugs, runners or carpets as it can be a trip hazard.

• Pull, carry or trap the power cord under doors or sharp edges.

LET'S TALK SAFETY Basic Safety Precautions

• Handle the plug or air purier with wet hands.

• Unplug the air purier by pulling on the power cord.

• Use the air purier in an area with toxic/explosive vapours/liquids, oxygen water tanks or near to ammable,

combustible materials (lighter uid, petrol, kerosene, chlorine, bleach and ammonia drain cleaner etc).

• Use the air purier with incorrect voltage as this may result in damage or injury to the user. The correct

voltage is listed on the ratings label.

• Use without all lters in place.

✔ Do

• Inspect the air purier regularly and remove any dust/dirt build up as this may aect the airow.

• Keep all openings/grills clear and free from obstruction and sources of heat, and open ames (including

candles). Don’t attempt to remove blockages with sharp objects as this may cause damage to the air purier.

• Turn o all controls on the air purier before disconnecting or connecting the power cord.

• Always replace the fuse in the plug with a 3amp fuse. Always protect the power cable from heat.

• Use only CE approved 13amp extension cords, non-approved extension cords may overheat.

• Take care to arrange the extension cord as it can be a trip hazard.

• Always switch o and unplug the air purier before performing maintenance or troubleshooting checks.

Please keep instructions for further use.

Contents

2-3

5-6

10-11

Lets talk safety

Getting to know your machine

Air Quality Display

Getting started

Using your machine

Taking care of your machine

What to do if it goes wrong

Getting in touch

Technical specications

Accessories

Getting to know your machine

On/O

Air Quality

Display

Fan Speed

Air Inlet

Air Outlet

Filter Replacement

Light

Timer

Dust Sensor

Carry Handle

Filter

Carry Handle

Getting to know your machine

Auto mode

Switches fan speed to auto depending on the air quality indoors.

Night Mode

Switches power to low and dims the lights on the display panel.

Fan Speed

Low/Mid/High.

Timer

1 hour, 2 hours, 4 hours, 6 hours or 8 hours.

TimerFan Speed

Night ModeAuto Mode

On/O

Air Quality Display

Green light Yellow light Red light

Status of air quality Good Fair Bad

Dust sensor reading

IMPORTANT

This air purier is equipped with a smart panel that senses

your touch. Heavy pushing of buttons is not recommended.

IMPORTANT

CHECK the air purier has a lter. Be sure the supplied

lter is properly in place and all plastic is removed

before turning the air purier on.

PLACE the air purier on a hard surface such as the oor, a table

or desk. Be sure the grilles are not blocked by other objects,

and there are no candles or ames near the air purier.

PLUG IN into nearest standard electrical outlet.

LIGHTLY TOUCH - the on/o button to switch the air purier on.

Touch the power button again to turn the air purier o.

SELECT THE FAN SPEED - lightly touch the fan speed button until

the desired speed is reached.

ADJUST THE TIMER - lightly touch the timer button to set a run time

for 1 hour, 2 hours, 4 hours, 6 hours or 8 hours. The unit will turn o

once it runs for the selected hours.

Note: The air purier will run continuously if no time has been selected.

CHECK FILTER LIGHT - the lter light will illuminate when the lter

needs to be replaced. Once the lter has been replaced press the lter

replacement indicator for 5 seconds to reset, the lter indicator light

will go out. To order a replacement lter visit vax.co.uk

Getting started

HOW THE AIR PURIFIER WORKS

An air purier draws in room air from its air inlet, lets the air pass through

the lter that consists of a pre-lter and HEPA lter inside of the unit, then

releases clean puried air from its air outlet. The air purier repeats this

process by moving its internal fan. As air passes through the HEPA lter, it

removes airborne particles such as smoke, dust, pollen, and other potentially

harmful particles which could cause allergies, asthma and hay fever.

Choosing a Location

To maximize air circulation, position the air purier at least 50cm away

from walls, or any other large objects that could disrupt the airow.

For optimum results close all windows and doors. For more ecient

air treatment, place the air purier in a central location and make sure

the control panel can easily be accessed.

Using your machine

Press on/o control

to switch on/o.

Please note: The air

purier will automatically

turn o once the lter

cover is removed. The

power button will ash

and the unit will not turn

on until the lter and

cover is replaced.

The air purier will

continuously run when

all timer lights are o.

IMPORTANT

The control panel is touch

sensitive, lightly press controls.

Press fan control. The fan

speed indicator light will

illuminate displaying

selected speed.

Auto = The fan speed

will automatically adjust

depending on the air quality.

L = Low fan speed

M = Medium fan speed

H = High fan speed.

Press timer control. The

timer light will illuminate

showing the time selected:

1 hour, 2 hours, 4 hours,

6 hours or 8 hours. The

air purier will turn o

once the selected time has

completed.

CAUTION

Filter replacement indicator.

Press for 5 seconds to reset

lter replacement indicator

once lter is changed.

The air purier can be controlled by using the controls on the air purier

or by using the remote control. When using the remote control always aim

towards the control panel on the front of the air purier

Night mode = Low speed

with limited light on the

product for easy sleeping.

Press the button for night

mode. It takes 10 seconds

for the lights to go o.

Taking care of your machine: replacing the lter

When the lter light is illuminated,

switch the air purier o and

unplug it from the power outlet.

Slide the lter lock to the left.

(Unlock position).

Remove lter cover. Carefully pull the used lter out.

Slide replacement lter into the unit.

Ensure the lter is in the upright

position with the open end facing

upwards as indicated above.

Replace your lter every 3-6 months depending on usage.

Once the lter has been replaced

press the lter replacement

indicator for 5 seconds, or

until the beep, to reset.

Lock the lter into place by sliding

the lter lock to the right.

Ret the lter cover.

Do not wash lters.

CAUTION

TIP

The lters will need replacing

more often when using the

air purier in smoke lled

or dusty environments.

TIP

Once the lter cover is removed

the power button will ash and

the air purier will not switch

on until the lter and cover

are replaced.

• The plug may not be fully pushed into the electrical socket.

• Check the fuse in the plug. If this needs replacing, always replace with a 3amp British fuse.

• The lter cover may not be secure. Check the lter cover is securely tted. Go to ‘Taking care of your machine’.

• The lter may not be tted correctly. Check the lter. Go to ‘Taking care of your machine’.

• Timer may have nished. Re-set the timer. Go to ‘Using your machine’.

• Fan speed may be set to L = Low. Change fan speed to desired setting. Go to 'Using your machine'.

• Timer may have nished. Re-set the timer. Go to ‘Using your machine'.

• The lter cover may not be secure. Check the lter cover is securely tted. Go to ‘Taking care of your machine’.

• The lter may not be tted correctly. Check the lter. Go to ‘Taking care of your machine’.

• The lter may need replacing. Go to 'Taking care of your machine'.

• The air grills may be blocked. Make sure the air inlet is free from any obstruction.

• The lter may need replacing. Go to 'Taking care of your machine'.

• Aim the remote control towards the control panel on the front of the air purier and press the on/o button.

• The battery may need replacing. Always replace with a CR2025 lithium battery.

SolutionProblem

Why does my air

purier have

no power?

Why isn't my fan

working?

Why is my air purier

making an excessive

noise?

Why isn't my remote

control working?

What to do if it goes wrong

IMPORTANT Unplug and switch o the air purier before performing maintenance or troubleshooting checks.

Getting in touch…

It's quick and easy to register

for your FREE guarantee

†

Online at: vax.co.uk/registration

Please retain your original receipt

for proof of purchase.

†

Registration required. Terms and conditions apply.

We’re here if you need us

Instead of taking me back to the shop,

simply visit our online support:

vax.co.uk/support

Still need to get in touch?

Our UK based Customer Care Team are here to support you.

For help with assembly, operational or performance problems, or buying and tting new accessories,

you can nd all our contact details at vax.co.uk/contact

This user guide can be found online at: vax.co.uk/support

Technical specications

Input voltage

Rated frequency

Wattage

Weight

220-240V

50Hz

45W

6.74kg

Accessories

Pure Air 200 Filter Kit

1-7-139061

EU Statement of Compliance: Manufacturer/EU importer: Vax Limited, hereby on our own responsibility, declare that the AC02AMV1 is manufactured in compliance with the

following Directives: Safety: 2014/35/EU Low Voltage Directive. EMC: 2014/30/EU Electromagnetic Compatibility Directive.

Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice.

pending or registered in other countries.

GET IN TOUCH

[email protected] vax.co.uk