Panasonic NVGS40 Product information

Brand: Panasonic

Model: NVGS40

Type: Product information

When connecting any device to a PC via firewire (IEEE 1394), damage may

occur to the Firewire port on the device, if connected/disconnected whilst the

device or PC is switched on. This can be due to the make of cable/PC or the way

in which the cable is connected to the equipment.

For Panasonic camcorders please use the following procedure to avoid possible

damage occurring to the camcorders DV socket.

Connecting the camcorder:

1. Please make sure that the Camcorder is switched off. Disconnect the

battery/AC adaptor from the unit

2. Please ensure that the PC is switched off

3. Plug in the Firewire (DV) cable into the PC

4. Plug in the Firewire (DV) cable into the DV socket on the camcorder

5. Attach the AC adaptor or Battery (Battery is recommended)

6. Switch on the PC

7. Switch on the camcorder.

Disconnecting the camcorder:

1. Exit all applications that you were using with the camcorder.

2. Switch the camcorder off

3. Shut down and Switch the PC off

4. Disconnect the AC adaptor or battery from the camcorder

5. Disconnect the Firewire (DV) cable from the camcorder

6. Disconnect the Firewire (DV) cable from the PC. (You can leave the cable

attached to the computer for future use)

The Firewire (DV) cable should not be connected or disconnected when the

camcorder or PC is switched on. This may cause damage to the DV output

section of the camcorder. This will result in the camcorder not communicating

to the PC via firewire. (All other functions may be unaffected)

Please note that if the DV port on the camcorder has been damaged once and

then repaired, please have the PC’s firewire socket and the firewire cable

checked before re-connecting the camcorder to the PC. The Firewire

connection on the PC or cable may be the cause of the damage to the

camcorder. If the DV port on the camcorder is damaged again then this will be

repaired on a chargeable basis.

Hints/Tips

DOCUMENT TITLE

How to avoid damage to a device when connecting to a PC via

firewire (IEEE 1394)

REV

01.00

APLICABLE MODELS

All DVC with a DV IEEE 1394(Firewire) connection

DOCUMENT TYPE

Panasonic NVGS40 Product information

Panasonic NVGS40 Product information

Panasonic NVGS40 Product information

Related papers

Other documents