Panasonic KXTH112 Operating instructions
- Category
- Telephone handsets
- Type
- Operating instructions
The Panasonic KXTH112 is a cordless phone system with a variety of features to make your calling experience more convenient. With the ability to connect to two separate phone lines, you can easily manage multiple calls and avoid missing important conversations. The base unit's answering system includes a two-minute recording time, allowing you to capture messages from callers when you're away. Up to seven additional handsets can be registered to the base unit, providing flexibility and convenience for making and receiving calls throughout your home or office.
The Panasonic KXTH112 is a cordless phone system with a variety of features to make your calling experience more convenient. With the ability to connect to two separate phone lines, you can easily manage multiple calls and avoid missing important conversations. The base unit's answering system includes a two-minute recording time, allowing you to capture messages from callers when you're away. Up to seven additional handsets can be registered to the base unit, providing flexibility and convenience for making and receiving calls throughout your home or office.
PQQW15222ZA DM0506MK0
Continue page 2.
Setting up
Connect the included telephone line cord depending on your situation.
If you subscribe to a DSL service, connect a noise filter to the telephone line between the
base unit and the telephone line jack. Refer to the operating instructions for connections.
For further information, visit http://www.panasonic.com/phonehelp
To connect to 2 single-line telephone jacks
To connect to a 2-line telephone jack
To 2-line telephone
jack (RJ14C)
4-wire telephone line cord with green plugs
Line 1
Line 2
To single-line telephone jacks (RJ11C)
2-wire telephone line cord
with transparent plugs
4-wire telephone line cord
with green plugs
Base unit
“Click”
Base unit
“Click”
Model No. KX-TH112
Quick Guide
TH112_QG(e).fm Page 1 Monday, June 5, 2006 3:25 PM
– 2 –
Continued
Setting up
For further information, visit http://www.panasonic.com/phonehelp
Base unit
CHARGE 6 HOURS
Handset
Use only the included Panasonic AC adaptor PQLV206.
Confirm the charge
indicator is on.
(120 V AC,60 Hz)
C
D
A
B
Hook
Press plug firmly.
TH112_QG(e).fm Page 2 Monday, June 5, 2006 3:25 PM
– 3 –
Operating tips
{ }: indicates button names/soft key names.
Using the joystick
The handset joystick can be used to navigate through
menus and to select items shown on the display, by
pushing it up {^}, down {V}, left {<}, or right {>}.
Adjusting audio volume
Push the joystick up {^} or down {V} repeatedly while
talking.
Handset soft keys
The handset features 2 soft keys and a joystick. By
pressing a soft key, or by pressing the center of the
joystick you can select the feature shown directly
above it on the display.
Center of joystick:
The joystick can be used to select the center soft key
icon, by pushing down on the center of the joystick.
{
SELECT},
{
SAVE},
{
OK} and additional other
functions are assigned to soft keys. Pay attention to
soft keys to find functions you need during handset
operation.
For further information, visit http://www.panasonic.com/phonehelp or refer to
Operating Instructions.
LINE2
LINE1
Center of
joystick
TH112_QG(e).fm Page 3 Monday, June 5, 2006 3:25 PM
– 4 –
Date and time (Handset)
1 {MENU} (center of joystick) i {#}{1}{0}{1}
2 Enter the current month, day, and year by selecting 2 digits for each.
3 Enter the current hour and minute (12-hour clock format) by selecting 2 digits for each.
4 Press {*} to select “AM” or “PM”. i
{
SAVE} i
{
OFF}
Adding items to the phonebook (Handset)
1 {MENU} (center of joystick) i d i {SELECT}
2 {ADD}
3 Enter the name (max. 16 characters). i {NEXT}
4 Enter the phone number (max. 32 digits). i {NEXT}
5 Select the desired ringer ID. i {NEXT}
6 Select the desired light-up ID. i {NEXT} i {SAVE}
7 {OFF}
Basic operation (Handset)
Feature Operation
Adjusting the receiver/
speaker volume
Push the joystick {^} or {V} repeatedly while talking.
Viewing the caller list and
calling back
1 {MENU} (center of joystick) i G i {SELECT}
2 Push {V} to search from the most recent call, or {^} to
search from the oldest call.
3 {C}
Ringer volume 1 {MENU} (center of joystick) i {#}{1}{6}{0}
2 Select the desired line.
3 Select the desired volume. i
{
SAVE} i
{
OFF}
Answering call-waiting
call (2nd call)
Press {CALL WAIT} when you hear call waiting tone.
For further information, visit http://www.panasonic.com/phonehelp or refer to
Operating Instructions.
TH112_QG(e).fm Page 4 Monday, June 5, 2006 3:25 PM
– 5 –
Basic operation (Base unit)
Feature Operation
Adjusting the speaker volume
Press {^} or {V} repeatedly while talking.
Viewing the caller list and
calling back
1 {MENU} i G i {SET}
2 Press {V} to search from the most recent call, or {^} to
search from the oldest call.
3 {SP-PHONE}
Ringer volume 1 {MENU} i {#}{1}{6}{0}
2 Select the desired line.
3 Select the desired volume. i {SET} i {STOP}
Answering call-waiting call
(2nd call)
Press {CALL WAIT} when you hear call waiting tone.
Answering system (Base unit)
Feature Operation
Auto answer on/off 1 Press {LINE SELECT} repeatedly to select the desired
line(s).
2 {ANSWER ON}
Recording your greeting
message
(max. 2 minutes)
1 {MENU} i A i {SET}
2 “Greeting record” i {SET}
3 Select the desired line. i {SET}
4 After the unit beeps, speak clearly about 20 cm (8
inches) away from the MIC (max. 2 minutes).
5 To stop recording, press {STOP}.
6 Press {STOP} when finished.
Listening to new messages When the {MESSAGE} button flashes on the base unit,
press {MESSAGE}.
Listening to old messages When the {MESSAGE} button does not flash on the base
unit, press {MESSAGE}.
Erasing a message Press {ERASE} during playback.
Using the answering
system remotely
1 Dial your phone number from a touch tone phone.
2 After the greeting message starts, enter your remote
code. (Default remote code is “11”.)
L The unit plays back new messages including memo
messages.
L
After playing back new messages, the voice guidance starts.
3 Follow the voice guidance as necessary.
For further information, visit http://www.panasonic.com/phonehelp or refer to
Operating Instructions.
TH112_QG(e).fm Page 5 Monday, June 5, 2006 3:25 PM
– 6 –
Registering a cellular phone (Base unit)
1 Base unit:
Press and hold the desired CELLULAR SELECT button ({1} to {5}) until a short beep
sounds.
L “CellPhone Registering” is displayed and the CELLULAR SELECT button
starts flashing yellow-green.
2 Your cellular phone:
Follow the instructions of your cellular phone to enter the registration mode.
L Depending on your cellular phone, it may ask you to enter the base unit PIN (Default:
“7262”).
L When registration is completed successfully, the unit beeps and the button stops
flashing but remains lit in yellow-green.
Frequently asked questions
Question Cause/solution
How can I increase
handset volume level?
L Push the joystick {^} repeatedly while talking.
Why is the conversation
noisy or cutting off?
L Try to relocate the base unit so that distance from location
to use the handset will be minimized.
L Send your unit to service, if your unit has same problem
when the handset is next to the base unit.
Can I add another
accessory handset to my
base unit?
L Yes, you can add up to 7 additional accessory handsets.
L To purchase accessory handsets (KX-THA19),
please visit http://www.panasonic.com
or call 1-800-332-5368. TTY users (hearing or speech
impaired users) can call 1-866-605-1277.
Can I keep battery
charging all the time?
L You can leave handset on the base unit or charger
anytime. There is no damage to the battery.
How can I answer a call-
waiting call (2nd call)?
L Press {CALL WAIT} when you hear call-waiting tone.
For further troubleshooting information, visit http://www.panasonic.com/phonehelp or
refer to Operating Instructions.
TH112_QG(e).fm Page 6 Monday, June 5, 2006 3:25 PM
– 7 –
Quick troubleshooting
Place the handset on the base unit,
then check if the charge indicator is on.
The charge indicator is OFF.
The charge indicator
is ON.
Unplug and then plug AC
adaptor properly to both
the base unit and AC
outlet.
Unplug the AC adaptor of the base unit and remove the
battery from the handset, then plug in the AC adaptor
and insert the battery into the handset again. Try re-
registration as explained later in this guide.
Lift the handset, then try again.
If handset still shows the same
message, try re-registration as
explained later in this guide.
The charge indicator
is still OFF.
Re-registration
failed.
Re-registration
failed.
The charge
indicator is ON,
now.
Your telephone may need service. For further troubleshooting,
please visit http://www.panasonic.com/phonehelp
“No link to base. Move closer to base and try again.”
1 Handset shows:
TH112_QG(e).fm Page 7 Monday, June 5, 2006 3:25 PM
– 8 –
Quick troubleshooting
Lift up the handset from
the base unit.
Press {C} (TALK) at the
handset, then check if the
display shows “Talk”.
Press {s} (SP-PHONE),
then check if the dial
tone is heard from the
speaker on the back.
No dial tone
Dial tone is heard.
“No link to base.
Move closer to
base and try
again.” is displayed.
“Talk” is
displayed.
Check the telephone
cord is properly
connected to both
the base unit and
telephone jack on
the wall.
Try remedy for 1
on previous page.
Your telephone may
need service when
only back speaker
provides a dial tone.
2 No dial tone is heard from handset.
Your telephone may need service.
Please visit http://www.panasonic.com/phonehelp for further
troubleshooting.
Still no dial tone
No link to base.
Move closer to
base and try
again.
{C}
Talk Line1
00-00-00
L1
PRIVACY
MENU LINE2
{s}
TH112_QG(e).fm Page 8 Monday, June 5, 2006 3:25 PM
– 9 –
Registering a handset to base unit
The included handset and base unit are preregistered. If for some reason the handset is
not registered to the base unit, register the handset.
For further registration information, visit
http://www.panasonic.com/RegisterYourHandset
Handset
Handset
Base unit
Press and hold
INTERCOM
on base
unit for
3
sec.
Then press
OK
BACK
{OK}
Press {MENU} (center of joystick),
then press {#}{1}{3}{0}.
Press and hold {INTERCOM} until the IN USE
indicator flashes.
L Complete next step within 2 minutes.
Press {OK} (right soft key).
LINE1
LINE2
{MENU}
TH112_QG(e).fm Page 9 Monday, June 5, 2006 3:25 PM
1 Read the Operating Instructions
L If lost, you can download your Operating Instructions at
http://www.panasonic.com/phonehelp
2 Visit our website:
http://www.panasonic.com/phonehelp
L FAQs and troubleshooting hints are available.
3 Contact us via the web at:
http://www.panasonic.com/contactinfo
4 Call us at:
1-800-211-PANA (1-800-211-7262)
L Monday - Friday 9:00am - 9:00pm (EST),
Saturday/Sunday 10:00am - 7:00pm (EST)
To order a replacement battery,
please call: 1-800-332-5368
Or visit:
http://www.panasonic.com/batterystore
IMPORTANT!
If your product is not
working properly. . .
TH112_QG(e).fm Page 10 Monday, June 5, 2006 3:25 PM
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
Panasonic KXTH112 Operating instructions
- Category
- Telephone handsets
- Type
- Operating instructions
The Panasonic KXTH112 is a cordless phone system with a variety of features to make your calling experience more convenient. With the ability to connect to two separate phone lines, you can easily manage multiple calls and avoid missing important conversations. The base unit's answering system includes a two-minute recording time, allowing you to capture messages from callers when you're away. Up to seven additional handsets can be registered to the base unit, providing flexibility and convenience for making and receiving calls throughout your home or office.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Panasonic KXTH112 User manual
-
Panasonic KXTH102M Operating instructions
-
Panasonic KXTG5664 Operating instructions
-
-
-
-
-
-
-