PROBRITE ARM Installation guide

PROBRITE
Brand
PROBRITE
Model
ARM
Category
Floodlights
Type
Installation guide

This manual is also suitable for

PROBRITE ARM24-SLV is a 24” mounting arm designed for outdoor use, to be installed on a wall or a pole. It is made of aluminum and has a silver finish. The dimensions of the arm are 10” W x 17.5” H x 2” D and it weighs 2 lbs. The arm comes with all necessary hardware for installation, including hex head lag bolts, flat washers, a mounting clip, and a mounting bracket clip. For best results, it is recommended to clean the extension arm with clear water and a soft, damp cloth only.

PROBRITE ARM24-SLV is a 24” mounting arm designed for outdoor use, to be installed on a wall or a pole. It is made of aluminum and has a silver finish. The dimensions of the arm are 10” W x 17.5” H x 2” D and it weighs 2 lbs. The arm comes with all necessary hardware for installation, including hex head lag bolts, flat washers, a mounting clip, and a mounting bracket clip. For best results, it is recommended to clean the extension arm with clear water and a soft, damp cloth only.

Before returning to the store, call or email PROBRITE
Customer Service 9am-5pm EST Monday to Friday.
1-844-507-5651
[email protected]om
PROBRITE.COM
Questions? / Missing Parts? / Need Accessories?
Visit us online anytime or call us to get information on our product range, download
detailed spec & photometric files, find product and mounting accessories, view
installation tutorials and videos, and learn about our DLC® rebate eligible products.
INSTALLATION,
USAGE, & CARE GUIDE
24”
Mounting
Arm
Model No.
Mfr. SKU
ARM | ARM24-SLV
103-19900004-1
3
PROBRITE.COM
Please call 1-844-507-5651 or email support@probrite.com for further assistance.
2
Visit www.probrite.com/install for installation video tutorials and product support
Table of Contents......................... 2
Safety Information....................... 2
Pre-Installation............................. 2
Tools Required..............................2
Specifications................................. 3
Hardware Included........................ 3
Installation.................................... 4
Care & Cleaning............................5
Warranty........................................ 5
Table of Contents
Safety Information
IMPORTANT
THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE
NATIONAL ELECTRICAL CODE AND LOCAL BUILDING CODES BY A PERSON FAMILIAR
WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS
INVOLVED.
PRECAUTIONS
☐ Please read and understand this entire
manual before attempting to assemble,
install, or operate this light fixture.
☐ This arm should be installed outdoors
to a wall or to a pole.
Pre-Installation
PLANNING INSTALLATION
Before installing the light fixture, ensure that all parts are present. Compare parts with the
Hardware Included and Package Contents sections. If any part is missing or damaged, do
not attempt to assemble, install, or operate this light fixture.
Estimated installation time: 10 minutes
Dimensions
10” W x 17.5” H x 2” D
Weight
2 lbs.
Finish/Color
Silver
Material
Aluminum
SPECIFICATIONS
TOOLS REQUIRED
Work
gloves
Ladder
Phillips
Screwdriver
Pre-Installation (continued)
HARDWARE KIT
NOTE: Hardware not shown to actual size.
Part Description Quantity
AA
Hex Head Lag bolts 4
BB
Flat washers 4
EE
Area light mounting arm clasp 1
DD
Mounting clip (2 parts) 1
AA
BB
CC DD
Wrench or
Socket
Wrench
Power
Drill with
Drill Bits
Safety
goggles
5
PROBRITE.COM
Please call 1-844-507-5651 or email support@probrite.com for further assistance.
4
Visit www.probrite.com/install for installation video tutorials and product support
Installation
1
For best results
☐ Attach the mounting bracket clip (in
2 parts) (DD) to the extension arm by
Interlocking the bracket and placing
the bolt through the center hole and
tighten with the nut.
☐ Leave approximately one inch of the
extension arm protruding out of the
bottom of the bracket. (Fig. 1)
☐ Place the extension arm assembly onto
the desired mounting surface and mark
the four holes locations required for
mounting.
☐ Remove the arm assembly and drill
the four marked locations. Place the
assembly on the location again and
mount the extension arm using the hex
head lag bolts (AA) and washers (BB)
provided through the mounting clip
(DD). Tighten bolts using the wrench
until arm is secured to the mounting
surface. (fig.2)
☐ Feed supply wires through the arm
and make wiring connections to the
light fixture. Use wire nuts or suitable
connectors for the wire connections.
Follow wiring instructions provided
with the fixture being installed.
DD
DD
AA
Care and Cleaning
☐ To prolong the original appearance, clean the extension arm with clear water and a
soft, damp cloth only.
☐ Do not use abrasive cleaners or cleaners that contain alcohol. Do not apply paints,
solvents, or any other chemicals on this light fixture. They could cause a premature
deterioration of the aluminum and may void the warranty.
5-Year Limited Warranty
This is a limited warranty oered by Probrite for a period of five years from the date of purchase
to its customers. Probrite warrants to customers that the products will be free from defects
in material and workmanship. The obligation of Probrite under this warranty is limited to the
provision of replacement of products and is extended to the original purchaser of the product
on presenting valid purchase receipt or other proof of date of original purchase acceptable to
Probrite. The receipt is required for rendering the warranty performance. Any warranty claims
without original proof of purchase would not be accepted.
It should be noted that the warranty does not apply to Probrite products that have been
altered or repaired by unauthorized personnel, have been subjected to neglect, abuse, misuse
or accident or damages caused during shipping. Any other products not manufactured by
Probrite which have been supplied, installed and/or used in conjunction with Probrite products
are not covered under this warranty. Any damages caused by replacements bulbs, LEDs or
corrosion or discoloration of brass components are also not covered by this warranty.
Limitation of Liability:
In no event Probrite shall be liable for indirect, consequential, incidental or special damages, or
lost profits. Probrite is not liable for any claims or damage arising out of or connected with the
manufacture, sale, delivery, use, maintenance and repair or modification of Probrite products,
or supply of any replacement parts that, exceed the purchase price of Probrite products giving
rise to a claim. Labor charges to remove or install the fixtures will not be accepted.
To Claim:
Please contact PROBRITE customer service at 1-844-507-5651 or email support@PROBRITE.
com and include your name, address and contact number, along with a copy of the purchase
receipt and a brief description of the problem.
BB
x4
x4
WARNING: Before handling electrical wires,
turn the power o at the circuit breaker or
fuse. Place tape over the circuit breaker switch
and verify power is o.
Before returning to the store, call or email PROBRITE
Customer Service 9am-5pm EST Monday to Friday.
1-844-507-5651
[email protected]om
PROBRITE.COM
Questions? / Missing Parts? / Need Accessories?
RETAIN THIS MANUAL FOR FUTURE USE
Para las translaciones en español,
visit www.probrite.com/install
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

PROBRITE ARM Installation guide

PROBRITE
Brand
PROBRITE
Model
ARM
Category
Floodlights
Type
Installation guide
This manual is also suitable for

PROBRITE ARM24-SLV is a 24” mounting arm designed for outdoor use, to be installed on a wall or a pole. It is made of aluminum and has a silver finish. The dimensions of the arm are 10” W x 17.5” H x 2” D and it weighs 2 lbs. The arm comes with all necessary hardware for installation, including hex head lag bolts, flat washers, a mounting clip, and a mounting bracket clip. For best results, it is recommended to clean the extension arm with clear water and a soft, damp cloth only.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents