Pergo MG001480 Installation guide

Type
Installation guide
Jan20_QR P.1
Quarter Round Installation Instructions
Quarter Round
1. Measure the length of the wall where the quarter round will be installed.
2. Cut the quarter round with a miter saw, circular saw or hand saw to the necessary length.
3. Place the quarter round against the wallbase and test the t.
4. Nail the quarter round into the wallbase with nishing nails.
5. Fill nail holes with coordinating putty.
  • Page 1 1

Pergo MG001480 Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI