Franklin Sports 14308 Operating instructions

Brand
Franklin Sports
Model
14308
Type
Operating instructions

Franklin Sports 14308 is a versatile soccer training aid designed to enhance your skills in passing, trapping, and heading. With its two distinct sides, it caters to various training needs.

The curved ramp side simulates a real-life game scenario, allowing you to practice looping the ball back to yourself. The curved design and tensioned netting ensure the ball returns consistently, enabling you to refine your passing and receiving techniques.

On the other hand, the rebound wall side provides a solid surface to practice "give and go" training, one-touch passing, and trapping. By kicking the ball against the wall, you can improve your reaction time, ball control, and coordination with teammates.

Franklin Sports 14308 is a versatile soccer training aid designed to enhance your skills in passing, trapping, and heading. With its two distinct sides, it caters to various training needs.

The curved ramp side simulates a real-life game scenario, allowing you to practice looping the ball back to yourself. The curved design and tensioned netting ensure the ball returns consistently, enabling you to refine your passing and receiving techniques.

On the other hand, the rebound wall side provides a solid surface to practice "give and go" training, one-touch passing, and trapping. By kicking the ball against the wall, you can improve your reaction time, ball control, and coordination with teammates.

INSTRUCTION SHEET
MLS
®
SOCCER TRAINER
X-RAMP
14308
Parts List:
Pre-Assembled
64
53
21
1211
10
9
1 PC
7
1 PC
Pre-Assembled
Pre-Assembled
Pre-Assembled
1 PC
1 PC
1 PC
2 PCS
--Small parts.
Not for children under 3 yrs.
14
15
4 PCS 4 PCS
16
1 PC
13
28 PCS
Franklin Sports Inc.
Stoughton, MA 02072
Made in China
For replacements parts call
1-781-341-5178 or 1-800-225-8649
OR visit www.franklinsports.com
©2011 MLS, MLS, the MLS logo, Major League
Soccer and MLS team identifications are
trademarks and copyrights of Major League
Soccer, L.L.C. All rights reserved.
8
1 PC
Adult assembly required
CAUTION:
WARNING:
Assembly Instructions:
1) Remove all components from the package and confirm that you have
all of the parts listed.
FRAME ASSEMBLY:
2) Assemble the frame according
to the diagram to the right.
FUNCTION:
The MLS X-Ramp has two sides designed for training.
Side 1: Curved Ramp
This side is designed to help train passing, trapping and heading by returning the
ball in a controlled “looping” manner.
In order to achieve the looping effect, kick the ball toward the center of the
trainer. The ball MUST remain on the ground and kicked with force. The curved
design and the tension in the netting allow the ball to loop back to the player.
STORAGE:
To fold the unit for storage and travel, slide down the plastic guard on the locking
hinges located on both sides of the frame. Unclip the latch to release and fold.
See images below.
Locking
Hinge
Note: Netting was removed to illustrate folding feature. The netting can remain
on the product when folding for storage.
Side 2: Rebound Wall
This is designed to be used with one or multiple players. Kick the ball into the
wall to practice “Give and go” training, one touch passing and trapping skills.
NET ASSEMBLY:
For steps 3 & 4, attach the nets and bungee cords to the frame in the folded
position (see image below).
3) For the curved side of the frame, slide the corners of the netting (Part 7) onto
the corners of the frame. Attach the bungee cords (Part 13) to the grommets on
the netting (Part 7) and then to the frame to secure. The net should be very tight.
4) For the rebound side of the frame, attach the bungee cords (Part 13) to the
grommets on the netting (Part 8) and then to the frame.
RIBBON AND STAKES ASSEMBLY:
Unfold frame for steps 5 & 6.
5) Weave the red ribbon through the netting as shown below to create a target
strike zone area.
6) Use the ground stakes to secure and stabilize the item during play. Place the
ground stakes on each of the four bottom corners of the frame. *Note: The
ground stakes should attach to the frame only. Make sure that the netting is not
caught in the ground stake.
Keep hands and ngers clear
while pushing to fold soccer trainer. Failure to
observe this warning may result in loss of
ngers or other serious injury. Adult assembly
and supervision recommended.
15
14
15
15
3 5
4 6
1 2
1112
1112
9 10
15
7
13
13
8
8
14
13
16
14
7
Berthold Akzidenz Grotest /
Verdana
Original Artist: Vivian LiuProduct Division:Job Number: Date Created: 4.3.12 Date Approved On:
Youth Sports Indoor
Product Line: FALL 2011File Name: Last Modified By: Mary Ellen Mazzoli
107557-1
14308 MLS X-Ramp Trainer.ai
Pantone Spot Color
Secondary Pantone Color Pallette
4 color process
Logo Color Pantone Pallette
4 color process
Primary Pantone Color Pallette
4 color process
Creative Manager Approval:
Fonts Used:
Style Guide Reference
or Job Number Reference:
Product Manager Approval: Traffic Manager Approval:
Legal Approval:
Process Black C
  • Page 1 1
  • Page 2 2
  • Page 3 3

Franklin Sports 14308 Operating instructions

Brand
Franklin Sports
Model
14308
Type
Operating instructions

Franklin Sports 14308 is a versatile soccer training aid designed to enhance your skills in passing, trapping, and heading. With its two distinct sides, it caters to various training needs.

The curved ramp side simulates a real-life game scenario, allowing you to practice looping the ball back to yourself. The curved design and tensioned netting ensure the ball returns consistently, enabling you to refine your passing and receiving techniques.

On the other hand, the rebound wall side provides a solid surface to practice "give and go" training, one-touch passing, and trapping. By kicking the ball against the wall, you can improve your reaction time, ball control, and coordination with teammates.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents