Franklin Sports 2719 User manual

Category
Skill games
Type
User manual
Return Trainer
Pitch Target
DELUXE 2 in 1
Throwing & Pitching
Combo Set
Item #2719
Step 6:
Before putting the net on the frame, secure part (2), “Infinite Adjustment” system by
screwing onto pole counter clockwise. To attach net part (11) to frame, spread out net
and find red tabs attached to net. The red tabs indicate the corners of the net. To attach
net, start with one corner and attach with one bungee, then attach the other three
corners. Next, start at the top of the frame and attach the bungees across the top
spreading them evenly. Attach the bungees on one side spreading them evenly. Repeat
on bottom and then on final side.
Step 8:
Attach target ribbon part
(12) by weaving through
net and tying off at
ends.
Step 7:
To attach bungees to net
hold plastic ball in place
and wrap free end around
net and side tube. Loop
free bungee around plastic
ball.
For Replacement Parts Call 1-800-225-8649
MA Residents Call 1-781-341-5178
FRANKLIN SPORTS INC. Stoughton, MA 02072 www.franklinsports.com
Note: Do not extend
“Infinite Angle” adjustment
system beyond red
indicator mark on tube.
TOOLS REQUIRED:
FLAT OR PHILLIPS SCREWDRIVER
Step 9:
Attach catcher target, part
(13), to bunees on other side
of return. Place bungee
hooks into metal holes
around the outside of target
screen.
Step 10:
Attach collection bag, part
(14), to clips on front of
catcher target.
Step 11:
To draw back target,
attach back straps to the
back brace pole.
ISO 4/08
Use extreme caution when assembling
the net to the frame. The bungees will
be under extreme tension and must be
attached carefully. Adult assembly is
strongly recommended.
Note: To fold flat for easy storage, depress push
pins on part (6) and release support arm. Unit
will now fold flat.
  • Page 1 1

Franklin Sports 2719 User manual

Category
Skill games
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI