Evolve2 85

Jabra Evolve2 85 User manual

  • I have read the Jabra Evolve2 85 user manual. It describes how to pair the headset with your mobile device via Bluetooth, including how to activate pairing mode and what to do if the pairing is not successful. I'm ready to answer any questions you may have about the headset.
  • How do I pair my Jabra Evolve2 85 with my mobile device?
    What is the PIN code if asked during pairing?
    What to do if pairing is not successful?
Jabra Evolve2 85 - USB-A UC Stereo with
Charging Stand - Black
How do I pair my Jabra Evolve2 85 with my mobile device?
To pair your Jabra Evolve2 85 with your smartphone, tablet, or other
mobile device, follow these steps.
1. Turn on the Bluetooth setting on your mobile device.
2. To enter pairing mode, slide the On/Off switch on the left earcup to
the Bluetooth position, and hold it there until the LED flashes blue. If
you are wearing the headset, you will hear the pairing instructions.
The headset is now ready to pair with your mobile device.
3. To pair, go to the Bluetooth menu on your mobile device and select the
Jabra Evolve2 85 from the list of available devices.
If you are asked for a pin code, enter “0000” (four zeros).
Left earcup
Note
If pairing is not successful, try the pairing steps again, or try pairing with a
different Bluetooth device. For troubleshooting tips, see here.
Optionally, try using the Bluetooth Pairing Guide which provides detailed
steps for pairing with your mobile device.
31/08/2022 20:20
https://www.jabra.com.au/supportpages/jabra-evolve2-85/28599-989-989/faq/283c230e-
b99e-48e0-afe2-808fe79bae32
Page 1 of 1
/