Evolve2 75

Jabra Evolve2 75 User guide

  • Hello! I've reviewed the user manual for the Jabra Evolve2 75 headset. This document explains how to pair the headset with your mobile device using Bluetooth, focusing on the specific steps involving the On/Off switch and the LED indicator. I'm ready to assist you with any questions you have about setting up your device.
  • How do I pair my Jabra Evolve2 75 with my mobile device?
    What is the pin code if requested during pairing?
    What should I do if pairing is not successful?
Jabra Evolve2 75 - USB-C MS Teams - Beige
How do I pair my Jabra Evolve2 75 with my mobile device?
To pair your Jabra Evolve2 75 with your smartphone, tablet, or other
mobile device, follow these steps.
1. Turn on the Bluetooth setting on your mobile device.
2. To enter pairing mode, slide the On/Off switch on the left earcup to
the Bluetooth position, and hold it there until the LED flashes blue. The
headset is now ready to pair with your mobile device. If you are wearing
the headset, you will hear the pairing instructions.
3. To pair, go to the Bluetooth menu on your mobile device and select the
Jabra Evolve2 75 from the list of available devices. If you are asked for
a pin code, enter 0000 (four zeros).
Left earcup
Note
If pairing is not successful, try the pairing steps again, or try pairing with a
different Bluetooth device. For troubleshooting tips, see here.
Optionally, try using the Bluetooth Pairing Guide which provides detailed
steps for pairing with your mobile device.
27/06/2022 23:49
https://www.jabra.sg/supportpages/jabra-evolve2-75/27599-999-898/faq/9c217225-9fff-
4373-8939-a6c0e2558a74
Page 1 of 1
/