SolarEdge Home Hub Inverter Three Phase Installation guide

Brand: SolarEdge

Model: Home Hub Inverter Three Phase

Type: Installation guide

SolarEdge Home Hub Inverter Three Phase is a versatile and powerful inverter designed for residential and commercial solar PV systems. With its advanced features and capabilities, it offers efficient energy conversion, flexible system design, and seamless monitoring, making it an ideal choice for homeowners and businesses seeking clean and reliable solar power.

SolarEdge

Home Hub Inverter -

Three Phase

Quick Installation Guide

For Europe, APAC and South Africa

solaredge.com

Werner-Eckert-Strasse 6/81829 Munich/GermanySolarEdge Technologies Gmbh

Subject to change without notice.

Mounting

Datasheet Installation Guide

BWiring

OFF

Drill Level

Phillips/Flat-Blade

screwdriver set

Watchmaker

screwdriver

Hammer

Pencil

Wire Cutter

Mounting screws and

wall plugs -max M10

min 2

Tools and Materials

What’s in the Package

CAUTION! Denotes a hazard. It calls attention to a procedure that, if not correctly performed or adhered to,

could result in damage or destruction of the product. Do not proceed beyond a caution sign until the indicated

conditions are fully understood and met.

WARNING!

This symbol denotes a hazard. It calls attention to a procedure that if not correctly performed or adhered

to could result in injury or loss of life. Do not proceed beyond a warning note until the indicated

conditions are fully understood and met.

Crimping tool

WARNING! Connect a

ground cable according to

local regulation.

Inverter

Wall mount bracket SolarEdge Home

Network Antenna

Torque wrench

with 10 mm socket hex

and 5 mm Allen bit

Antenna

bracket

DC connection

box

20 cm

10 cm 10 cm

20 cm

4 N*m

CAUTION! Do not

block airflow

37 KG

CAUTION! DO NOT rest

the inverter vertically on

the connectors

Open-end

torque

wrench

Ferrite

Bead

Optional

antenna

location

Wiring Video

Unpacking and

Mounting Video

Cable lugs

WARNING! HAZARD OF ELECTRIC SHOCK. DISCONNECT POWER BEFORE

INSTALLATION OR SERVICE

CAUTION! DO NOT use a

circuit breaker with a rated

current of more than 16A

WARNING!

connect the

grounding wire first

8 mm

100 mm

Max 6 mm

Ferrule

L1 L2 L3 N

1.5 N*m

PV String 1 PV String 2

WARNING! Before installing or operating the Inverter, read the Safety and

Handling instructions provided with this product.

Optional

EChaining Multiple Inverters

Backup

interface

LED Indications

•Red: fault

•Green: power production,

•Blinking Green: Grid connection ok

•Blue: communication ok

For more indications refer to:

https://www.solaredge.com/leds

Commissioning the Inverter

SetApp

P 1 0

P(Hold for 2 seconds and release)

2Run SetApp and

follow the instructions

on the screen

4 N*m

I J

For remote status, fault indications, and system

performance, refer to Remote Monitoring at:

https://www.solaredge.com/products/pv-monitoring#/

RS485-2

Communication Board

G A B

SW1 SW2

1.5

N*m

CAT5e/6 cable

Meter Connection (The meter can only be connected if Backup

Interface is not used. Inline meter can also be connected wirelessly)

Meter

G A B

1.5 N*m

CAT5e/6 cable

Battery Connection

2.2 N*m

Communication

Cable

Max cables

length 5 m

Communication Cable

Ground Cable

8N*m

CAT5e/6 cable

G A B G A B G A B

SW2

CAT5e/6 cable

Leader (first) Follower (last)

CSolarEdge Home Network Connection

1.1 N*m

Backup

interface

Inline meter

1.5 N*m

LAN Connection

Ethernet Cable

Router

CAT5e/6 cable

LAN cable

NOTE: In leader Follower

configuration,

LAN MUST connect to Leader

Follower

Backup Interface Connection

(The Backup Interface can also be connected wirelessly)

SW2

SolarEdge Home Hub Inverter Three Phase Installation guide

SolarEdge Home Hub Inverter Three Phase Installation guide

SolarEdge Home Hub Inverter Three Phase Installation guide

Related papers

Other documents