8226 LACKLAND RD. ST. LOUIS, MO 63114 | GLIDEAWAY.COM | 800.428.5222 08.23.21
To learn more about
your product or
its warranty, call
855.581.3095
or visit us online at
glideaway.com.
STEEL BED FRAMES
TFQK-6 and TFQK-6G
1. Swing out cross arms on all corners of
the bed frame.
2. Install glides to the bottom of all outside
legs. (See Fig. A) Install glides to the
bottom of center support legs.
3. Find the key hole slots that correspond
to the bed size you need. Engage rivets
into key hole slots and use plastic
fastener to secure cross arms into
position. (See Fig. B)
4. Place center support in center of bed
frame into head to toe position.
1. Swing out cross arms on all corners of
the bed frame.
2. Install glides to the bottom of all outside
legs. (See Fig. A) Install glides to the
bottom of center support legs.
3. Find the key hole slots that correspond
to the bed size you need. Connect
extension bar to the main frame
assembly using the key hole slots
corresponding to the size you are
needing. Engage rivets into key hole
slots and use plastic fastener to secure
into position. (See Fig. C)
4. Place center support in center of bed
frame in head to toe position. Use slic
pin to secure into position.
SEE FIG.
A
OR
FIG. B
X1 Clip
Shoulder Rivet
CALIFORNIA
KING
KING
FIG. C
FIG. A
Attach here for
TWIN Size
Attach here for
FULL Size
Attach here for
QUEEN Size
Attach here for
CALIFORNIA
KING Size
Attach here for
KING Size
KING / CALIFORNIA KING
TWIN / FULL / QUEEN
/
