2. GLIDEAWAY
  3. SG-22
SG-22

GLIDEAWAY SG-22 Operating instructions

  • I've reviewed the user manual for the Steel Bed Frame SG-22. This document provides instructions on assembling the bed frame, with details on inserting glides, adjusting supports, and securing the frame. I am ready to assist you with questions about the setup procedure.
  • How far from the headboard should center supports be positioned?
    How should glides be adjusted?
    How to lock support leg into position?
8226 LACKLAND RD. ST. LOUIS, MO 63114 | GLIDEAWAY.COM | 800.428.5222 08.16.22
To learn more about
your product or
its warranty, call
855.581.3095
or visit us online at
glideaway.com.
STEEL BED FRAMES
SG-22
1. Insert threaded glide into leg as shown.
2. Slide extension pieces outward so they
are flush with the inside of the wood rail
and leg is centered in bed.
3. Lock support leg into position by hand-
tightening the L bolt.
4. Position center supports 15", 40" and
65" from the headboard as shown.
5. Screw center supports to center support
bearer rail (wood lip on inside of wood
rails) as shown.
6. Adjust glides to float just o the floor,
approximately 1/16".
15"
40"
65"
321
654
/