2. OPCOM
  3. OFG009
OFG009

OPCOM OFG009 User guide

  • Hello! I am an AI chatbot trained to assist you with the OPCOM OFG009 User guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Remote Control Button
On
Button
Light On
Step Indicator SoundLED Level LED Description
Off Light OffB 1Sec.
16 hrs On / DailyBBB
9 hrs On / DailyBBBB
S (
succulent
)
BG (garden)
MODE
BB
Press
Press
Press
Press
-
White B
Red
COLOR BB
UV BBB
BB
TIMER
#2
Low-L2
High-L4
RT-01
TIMER
MODE
COLOR
On
Hi (On:16Hr/Day)
Low
Off
(On:09Hr/Day)
Garden
Succulent
Blue White
Red
UV
Beep Rule
On
Off
L1
L2
L3
L4
Push Rule
Short Sound
Long Sound (1 sec)
1 Push : Switch
Long Push : Dimmer
Confirm
Main Device Single Button
On
Button
One
Press
Light On
Step Indicator SoundLED Level LED Description
High
TIMER
Light Off
B 1Sec.
Low
16 hrs On / Daily
BBB
Off
9 hrs On / Daily
Timmer setting
just for light control.
BBBB
#1
BB
Press
Control
Timmer setting
just for light control.
High
Low
One
Press
One
Press
Dimmer Level
L0
L1
L2
L3
Long press:
Dimmer for 5 Levels cycling
L0 (B 1 sec) turn off
L1 (B) Level 1
L2 (BB) Level 2
L3 (BBB) Level 3
L4 (BBBB) Level 4
and top Level
L4
OPCOM
Microgreens Ball
Model : OFG009
OPCOM
MicroGreen Ball
Indoor Garden Families
OFG008B OFG008B-2pk OFG006 OFG008G OFG009 OFG010 OFG002-2 OFG011P
G Mode: Dedicated for wet plants (fill the water tank with 80ml of water to circulate moisture within the glass terrarium)
S Mode: Dedicated for both Succulent and Aquarium plants (Do Not fill the water tank with water)
This product is designed for indoor gardening. Without built-in temperature control,
our product works best within a temperature range of 18°C~30°C, specifically, 25°C.
Except for special plants that naturally grow in higher or lower temperatures, please adjust
the air circulating fans once the indoor temperature exceeds the range to sustain the plants’ growth.
Remarks
Fan setting
Turns off for 5 minutes/hour for the fan’s maintenance
Mode setting
Planting Environment Notification
Feel free to visit the OPCOM website
for more details!.
It’s Time
To Create Your Own
Refreshing MicroGreen Landscape
#1. Double press to switch On/Off
#2. Set up the Wake-up(automatically turns on everyday) and Sleeping(automatically turns off everyday) modes through lighting time setting.
A. Wake-up time setting: When light is on, press and hold for 5 seconds until it beeps.
B. Sleeping time setting: When light is off, press and hold for 5 seconds until it beeps.
#3. One short + One long pressing the Timer button resets the product to default settings.
default
Thank you for your interest having MicroGreen Ball. Hope you will like it very much.
The Microgreens Ball has the conditions for precision planting,including light,air,water,etc. From the succulent plants to the mosses of wetland
and aquatic ecology,all that could get sufficient growth conditions in the intelligent mode without the special care. Its automatic mode provides
the function of photometric sensing,which is quite suitable for creative placement or hanging in the environment of restaurant,
balcony and indoor garden, and no need to worry about the lack of light at all.
The MicroGreen Ball produce fresh air and positive energy every day, as well as the living environment that changes and projects light and
shadow with the growth of plants. It provides the automatic On / Off mode. In the early morning, it can be awakened by the Microgreens Ball
gradually as the phototherapy and to start the beautiful day; and at night, it can also help to fall asleep surrounded by the green andscaping.
When several Microgreens Balls are hung alternately up and down,the indoor environment soon becomes a 3D ecological garden immediately,
with High Color Accuracy up to Ra90 grow light to display the true color of the garden and flood light.
Now,let's begin the wonderful planting journey....
Step 1
Place the main device on the terrarium
by tightening 3 screws
Step 2
Plug in the USB cable
Step 3
Plug USB adapter to AC power outlet
Step 4
Unplug the stopper from the water port Step 5
Use the drop bottle to fill the water into
the opening (This step is only for Garden Mode,
not recommend for other modes, to maintain
the humidity of the moss and ferns)
Step 6
Drip the water into the glass terrarium
A
G
H
D
E
C
A
B
F
A. Function button B. Function indicator C. Remote control receiver D. Remote control receiver
E. Power port (USB Type C) F. Air outlet G.Water port rubber H.Power port (DC Jack)
Front View Rear View Bottom View Top View
(1) Air Pump
(2) Buble Tube
(3) Water Filter
(2) Hanging wire
10kg weight capability
(3) Cable ties x3
Aquarium set
Air Pump(1)
Fixing screw
(1) Main Device (2) Terrarium (3) Water bottle (4) Remote controller (5) USB Power cord
(9) Manual / Warranty Card
(6) Transformer (7) Humidity Cover (8) Decoration accessories
RT-01
TIMER
MODE
COLOR
OPCOM
Microgreens Ball
Model : OFG009
Quick Manual Guide
Microgreens Ball OPCOM
Microgreens Ball
Standard Accessories
Aquarium set (Optional) Hanging set (Optional)
Microlandscape tool set(Optional)
Model: OFA01A Model: OFA02 Model: OFA03
(1)
Fix holder
● Scissors
● Short Clip
● Long handle clip
● Long handle brush
● Long handle scraper
● Leather case
Hanging set setup:
Hanging set can handle weight up to 10kg and Win the 3D Sky Garden Art design around the room.
Hook Nut
AC Power Ceiling
Hanging wire(2)
Cable tie (3)
AC Adapter(6)
Fix holder (1)
Nut
socket
Installation
Planting
Drip water every 5-7 days.
Succulents garden design
with Decoration part(8).
Dirt Layer (1” Height)
Light stone Layer (1.5” Height)
Light stone Layer (1.5” Height)
Dirt Layer (1” Height)
Sphagnum moss Layer (1” Height)
Moss / Ferns / Microgreen wet plants
garden design with decoration parts(8).
Drip water against different plants nesessary.
Drip water into tank around every week
or water shortage red light on for wet air.
Step 1:
Unscrew the device to open
glass terrarium port and set up
Aquarium planting.
Step 2:
Plug Bubble tube(2)
into water filter(3) and
put into water bottom.
Step 3:
Plug Bubble Tube(2)
another end to Air Pump(1) ;
and screw device to glass terrarium.
Step 4:
Plug Power Code type C connector
to Air Pump(1) and plug Air Pump(1)
type C connector to device.
Press Air Pump(1) button to switch ON/OFF pump>
No water in tank.
Aquarium set
Bubble Tube(2)
Aquarium set
water filter(3)
Aquarium
Succulents Moss / Ferns
Step 1
Fasten the fixing piece to the
eiling with screws.
Step 2
Place the base on the fixing piece.
Step 2
Use screws to lock the base to
the fixing piece.
Step 4
Insert the transformer in the base.
Step 5
Plug the USB power cable into
the adapter.
Step 6
Adjust the lanyard to the proper
length.
Welcome to check our
planting videos from
www.opcomfarm.com
Humidity Cover
If wet plants planted, the humidity cover could be
covered for moisture
/